Defi-Link
Meters are electronic gauges which are high response and refined
design. Defi-Link Meters need to be connected to Defi-Link Control Unit
II. Up to 7 gauges can be connected and controlled by one Control Unit
II. The name of the connection system is Defi-Link System. These great
looking BF gauges from Defi turn completely off with no visible
lettering / needles when gauge is off. Defi-Link System allows gauges
to be attached to Defi-Link Control Unit II with a single ''DAISY
CHAIN'' type wiring system.
Defi-Link II Controller required
Gauge
dials are invisible while the ignition switch is off. Once the ignition
switch is turned on, a clear display appears with white LED
illumination. A red emitting needle pointer increases visibility.
Gorgeous Opening mode and Ending mode:
Brightness
can be adjusted. There are 10 stages of brightness, 5 stages in the
daytime and 5 stages in the nighttime. The brightness decreases being
interlocked with the illumination switch on. The decrease in lights can
be canceled
Driving data can be stored and can be replayed up to 3 minutes.
Double Warning function by a meter's LED lamp and a beep
If Defi-Link Indicator(sold separately) is connected, it blinks when any of connected meters' warning LED light
Defi-Link Indicators can be connected to each gauge.
Differential pressure between fuel pressure and turbo can be shown if both of fuel pressure meter and turbo meter are installed
Defi-Link Control Unit II is necessary to operate Defi-Link Meter BF.
Defi-Link Meter BF is applicable only for 12V vehicles.