Whether you're a car detailing enthusiast or just looking to wash your daily driver to a new level of clean, this Fireball starter pack has the perfect selection of detailing chemicals to do a wash. Includes the classic Snow Foam Pre-Wash and Wheel++ Ultimate Wheel Cleaner to get you started. The Hydro Shampoo comes next to not only clean off any other debris, but also to leave a hydrophobic water-repelling coat. Finally, the ultimate coating wax is a simple spray-on/wipe-off solution for that ultimate shine but is perfect for beginners.
We recommend usinging the Foamee V2 Foam Cannon with a pressure washer for applying the Snow Foam. Read more about each cleaning product below.
Snow Foam Pre-Wash:
This product is a pH neutral foam pre-wash, specially designed to provide a thick and smooth foam that adheres to the car surfaces properly to help remove harsh pollutants easily without damage, with a powerful cleaning effect.
Features & Benefits:
- Highly Concentrated 1:30-60
- Non-contact, pre-wash cleaner.
- Tough on dirt yet kind to paintwork.
- Thick foam lifts larger particles of dirt & grit away from the surface.
- Helps prevent accidental swirl marks in paintwork.
- Wax & sealant-friendly.
Directions for Use:
- 1) Dilute solution with water to 1:30 ratio (30ml to 1L ) in a foam cannon or... to 1:60 ratio (15ml to 1L) in a Foamee V2 Cannon).
- 2) For a car with low contamination levels, spray the foam and rinse off after 1~2 minutes.
- 2) For a car with high contamination levels, pre-rinse to remove heavy soiling first, then use the product as instructed above.
*If you have to use under direct sunlight, raise the ratio of water used with the product, and if needed, spray additional water onto the car to keep from drying, prior to rising.
Fireball Wheel++ Wheel Cleaner w/Iron Burn:
Fireball Wheel++ is an effective wheel cleaner and liquid decontamination product used to liquefy the iron filings present on all vehicle surfaces. Compared to the Iron Burn, Wheel++ is stronger and suitable for wheels that are susceptible to heavy brake dust or contamination which needs a product strong enough to get full effect. Wheel++ is a simple spray on, rinse off solution which has a strong purple reaction when in contact with iron particles. Iron particles are present in all brake dust - and so this makes Wheel++ an extremely effective wheel cleaner. Iron particles can also be present in industrial areas, near railroads and often found on brand new cars from the transportation process.
Wheel++ retains it's pH neutral status (even though it is stronger) and safe for all painted (and non painted) surfaces. All you need is a light mist across your paintwork or wheels to see a strong reaction beginning. Unlike many other iron removers on the market; Wheel++ does not have an excessively strong scent. Wheel++ has been formulated to work on a variety of surfaces including paintwork, glass, metalwork and plastics. Wheel++ can be used neat or diluted down up to 1:3 for surfaces that are not heavily soiled.
Directions for Use:
- Spray the Fireball Wheel Cleaner onto the wheels and let it act (about 1-3 minutes).
- In case of heavy contamination, use a rim brush and then wash the wheels thoroughly before the product dries out.
- Repeat the steps if the wheels are heavily soiled.
*Make sure you do not use this product at high temperatures. Also, make sure the wheels have cooled before use.
Hydro Shampoo:
All-In-One product that combines foam cleaner and water-repellent Si02 coating together that is applied by bucket washing.
Directions for Use:
- Use after rinsing the car cleanly with high-pressure water.
- Highly concentrated detergent. Dilute shampoo with water at 1:1000 ratio. (10ml per 10L of water)
- Pour the product into a wash bucket to the correct dilution ratio. Make bubbles with high-pressure water or hose, then wash with pad or mitt to clean the Do not let shampoo dry on car before rinsing.
- After washing, rinse with high-pressure water, then dry with a drying towel.
Ultimate Coating Wax:
The final stage of any detailing process is to protect your hard work, to keep paintwork shiny for as long as possible. Fireball Ultimate Coating Wax can be used as a stand-alone product or to give existing sealant layers a gloss and hydrophobic boost after each wash. Ultimate Coating Wax provides up to 3 months hydrophobic protection. Supplied with Spray Trigger.
Features & Benefits:
- Up to 3 months of Hydrophobic protection.
- Boost gloss & hydrophobic protection quickly & easily.
- Easy to use, spray on formula.
- Can be used on its own or to boost existing sealants.
- Adds longevity to the life of Nano sealants.
- Instantly Add Gloss & Hydrophobic Protection.
Directions for Use:
- Spray onto clean dry surface.
- Spread and hand buff using a soft microfibre towel.