{"title":"Hawk In Stock","description":"","products":[{"product_id":"hawk-performance-dtc-60-front-brake-pads-mazda-mx-233451","title":"Hawk Performance DTC-60 Front Brake Pads","description":"\u003cp\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/hawk-performance-dtc-60-front-brake-pads-mazda-mx~233451\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003c\/p\u003e  \u003cp\u003eRunning with extremely high deceleration rates and increased downforce poses different challenges, so Hawk designed DTC-60. Recommended with DTC-70 when split friction between axles is desired, it has excellent modulation and release characteristics.\u003c\/p\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eSuperior release and torque control\u003c\/li\u003e \t\u003cli\u003eVery low abrasive rotor wear\u003c\/li\u003e \t\u003cli\u003ePopular choice on lightweight front axle applications, with or without ABS\u003c\/li\u003e \t\u003cli\u003eApplicable to NASCAR\/NASCAR modified, ARCA, Super Late models, pavement circle track, Pro 2\/Pro 4 Off Road Trucks\/Pro Lite, Sports Car\/GT\/GS, Open Wheel\/Formula\u003c\/li\u003e \t\u003cli\u003eAll Hawk Performance compounds are not compatible with carbon ceramic rotors. Hawk pads are designed to work with Iron\/Metal rotors.\u003c\/li\u003e \t\u003cli\u003eHigh torque\u003c\/li\u003e \t\u003cli\u003e205 Deg C-870 Deg C operating temperatures\u003c\/li\u003e \t\u003cli\u003e370 Deg C-593 Deg C optimal temperature range\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eTo ensure correct compatibility we always recommend comparing your existing brake pads to the pad shape diagram provided above. Vehicle fitment provided is to be used as a guide only and may not suit your vehicle.\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003e1994-1997 Mazda MX-5 NA\u003c\/li\u003e \t\u003cli\u003e1998-2004 Mazda MX-5 NB\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eImportant - Installation and Brake Bedding Procedure:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003e\u003cu\u003eSTREET\u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eStreet Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eTo break in the new components, make 6 to 10 stops from approximately 30 to 35 MPH\u003c\/li\u003e \t\u003cli\u003eapplying moderate pressure.\u003c\/li\u003e \t\u003cli\u003eMake an additional 2 to 3 hard stops from approximately 40 to 45 MPH.\u003c\/li\u003e \t\u003cli\u003eDO NOT DRAG BRAKES!\u003c\/li\u003e \t\u003cli\u003eAllow 15 minutes for brake system to cool down.\u003c\/li\u003e \t\u003cli\u003eYour brakes are now ready for use and can be driven normally.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cu\u003eMOTORSPORTS \u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad\u003cbr role=\"presentation\"\u003e installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure :\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eMotorsports Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e \t\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e \t\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e \t\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e \t\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003cbr role=\"presentation\"\u003e \u003cu\u003eIMPORTANT REMINDERS WHEN BURNISHING\/BEDDING BRAKE PADS:\u003c\/u\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e \t\u003cli\u003eDo not drag brakes while car is moving during break?in procedure.\u003c\/li\u003e \t\u003cli\u003eDo not engage pedal while car is stopped at any time following the break?in procedure.\u003c\/li\u003e \t\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e \t\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e \t\u003cli\u003eClean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads.\u003c\/li\u003e \t\u003cli\u003eSome forms of racing don’t allow time for the proper break?in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/hawk-performance-dtc-60-front-brake-pads-mazda-mx~233451\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003c\/p\u003e","brand":"Hawk Performance","offers":[{"title":"Default Title","offer_id":49433035866415,"sku":"HB149G.505","price":359.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/3903\/9279\/files\/HB149G.505.jpg?v=1714107617"},{"product_id":"hawk-performance-hp-rear-brake-pads-honda-s2000-ci","title":"Hawk Performance HP+ Rear Brake Pads","description":"\u003ca href=\"https:\/\/www.prospeedracing.com.au\/hawk-performance-hp-rear-brake-pads-honda-s2000-ci\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003cp\u003eHP Plus utilizes a unique Ferro-Carbon, high-tech friction material that was developed and manufactured for sport driving in autocross, Solo II and Ã’track dayÓ applications. The Ferro-Carbon formulation offers lower wear rates and higher torque values than other competitive materials.\u003c\/p\u003e  \u003cp\u003eExtremely high coefficient of friction makes HP Plus the perfect upgrade over stock for high performance streetcars used in autocross competition or that experience repetitive, heavy braking.\u003c\/p\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eLow to mid temperature range\u003c\/li\u003e \t\u003cli\u003eFade resistant\u003c\/li\u003e \t\u003cli\u003eSmooth \u0026amp; predictable torque\u003c\/li\u003e \t\u003cli\u003eIdeal for Autocross \u0026amp; club racing events\u003c\/li\u003e \t\u003cli\u003eAll Hawk Performance compounds are not compatible with carbon ceramic rotors. Hawk pads are designed to work with Iron\/Metal rotors.\u003c\/li\u003e \t\u003cli\u003eLow torque\u003c\/li\u003e \t\u003cli\u003e38 Deg C-425 Deg C operating temperatures\u003c\/li\u003e \t\u003cli\u003e149 Deg C-315 Deg C optimal temperature range\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eTo ensure correct compatibility we always recommend comparing your existing brake pads to the pad shape diagram provided above. Vehicle fitment provided is to be used as a guide only and may not suit your vehicle.\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003e1999-2009 Honda S2000 AP1\/AP2\u003c\/li\u003e \t\u003cli\u003e2001-2005 Honda Civic Type-R EP3\u003c\/li\u003e \t\u003cli\u003e2001-2005 Honda Civic ES\/EU\u003c\/li\u003e \t\u003cli\u003e1994-2001 Honda Integra DC2 (Inc Type-R)\u003c\/li\u003e \t\u003cli\u003e2001-2007 Honda Integra DC5 (Inc Type-R)\u003c\/li\u003e \t\u003cli\u003e2010-2016 Honda CR-V ZF\u003c\/li\u003e \t\u003cli\u003e1991-1996 Honda Prelude BB1-BB4\u003c\/li\u003e \t\u003cli\u003e1997-2001 Honda Prelude BB5-BB9\u003c\/li\u003e \t\u003cli\u003e1991-1995 Honda Legend KA\u003c\/li\u003e \t\u003cli\u003e1991-1997 Honda Accord CB\/CD\u003c\/li\u003e \t\u003cli\u003e1998-2002 Honda Accord CG\u003c\/li\u003e \t\u003cli\u003e2002-2008 Honda Accord Euro CL\u003c\/li\u003e \t\u003cli\u003e2003-2007 Honda Accord CM\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImportant - Installation and Brake Bedding Procedure:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003e\u003cu\u003eSTREET\u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eStreet Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eTo break in the new components, make 6 to 10 stops from approximately 30 to 35 MPH\u003c\/li\u003e \t\u003cli\u003eapplying moderate pressure.\u003c\/li\u003e \t\u003cli\u003eMake an additional 2 to 3 hard stops from approximately 40 to 45 MPH.\u003c\/li\u003e \t\u003cli\u003eDO NOT DRAG BRAKES!\u003c\/li\u003e \t\u003cli\u003eAllow 15 minutes for brake system to cool down.\u003c\/li\u003e \t\u003cli\u003eYour brakes are now ready for use and can be driven normally.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cu\u003eMOTORSPORTS \u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad\u003cbr role=\"presentation\"\u003e installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure :\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eMotorsports Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e \t\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e \t\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e \t\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e \t\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003cbr role=\"presentation\"\u003e \u003cu\u003eIMPORTANT REMINDERS WHEN BURNISHING\/BEDDING BRAKE PADS:\u003c\/u\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e \t\u003cli\u003eDo not drag brakes while car is moving during break?in procedure.\u003c\/li\u003e \t\u003cli\u003eDo not engage pedal while car is stopped at any time following the break?in procedure.\u003c\/li\u003e \t\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e \t\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e \t\u003cli\u003eClean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads.\u003c\/li\u003e \t\u003cli\u003eSome forms of racing don’t allow time for the proper break?in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible\u003c\/li\u003e \u003c\/ul\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/hawk-performance-hp-rear-brake-pads-honda-s2000-ci\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e","brand":"Hawk Performance","offers":[{"title":"Default Title","offer_id":49433035931951,"sku":"HB145N.570","price":194.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/3903\/9279\/files\/HB145N.570.jpg?v=1714107615"},{"product_id":"hawk-performance-blue-9012-front-brake-pads-ap-racing-cp3307-cp3620-cp3720-cp4890-17mm-hb110e-654","title":"Hawk Performance Blue 9012 Front Brake Pads","description":"\u003cp\u003eDesigned as an entry level endurance compound, there's nothing second-string about Hawk's Blue 9012 race compound. Easier to bed in and delivering excellent pad and rotor life, Blue 9012 is a medium torque pad developed specifically for Road, Rally and Circle Track racing.\u003c\/p\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eAll Hawk Performance compounds are not compatible with carbon ceramic rotors. Hawk pads are designed to work with Iron\/Metal rotors.\u003c\/li\u003e \t\u003cli\u003eIntermediate initial bite\u003c\/li\u003e \t\u003cli\u003eIncreased mid-mu characteristics\u003c\/li\u003e \t\u003cli\u003eMedium\u003c\/li\u003e \t\u003cli\u003e121Ã?C-538Ã?C operating temperature range\u003c\/li\u003e \t\u003cli\u003e176Ã?C-426Ã?C optimal temperature range\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eTo ensure correct compatibility we always recommend comparing your existing brake pads to the pad shape diagram provided above. Vehicle fitment provided is to be used as a guide only and may not suit your vehicle.\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eAP Racing CP3307 \/ CP3620 \/ CP3720 \/ CP4890 \/ CP5040-20-23 \/ CP6720 \/ CP6730 \/ CP6740\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eImportant - Installation and Brake Bedding Procedure:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003e\u003cu\u003eSTREET\u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eStreet Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eTo break in the new components, make 6 to 10 stops from approximately 30 to 35 MPH\u003c\/li\u003e \t\u003cli\u003eapplying moderate pressure.\u003c\/li\u003e \t\u003cli\u003eMake an additional 2 to 3 hard stops from approximately 40 to 45 MPH.\u003c\/li\u003e \t\u003cli\u003eDO NOT DRAG BRAKES!\u003c\/li\u003e \t\u003cli\u003eAllow 15 minutes for brake system to cool down.\u003c\/li\u003e \t\u003cli\u003eYour brakes are now ready for use and can be driven normally.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cu\u003eMOTORSPORTS \u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad\u003cbr role=\"presentation\"\u003e installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure :\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eMotorsports Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e \t\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e \t\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e \t\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e \t\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003cbr role=\"presentation\"\u003e \u003cu\u003eIMPORTANT REMINDERS WHEN BURNISHING\/BEDDING BRAKE PADS:\u003c\/u\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e \t\u003cli\u003eDo not drag brakes while car is moving during break?in procedure.\u003c\/li\u003e \t\u003cli\u003eDo not engage pedal while car is stopped at any time following the break?in procedure.\u003c\/li\u003e \t\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e \t\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e \t\u003cli\u003eClean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads.\u003c\/li\u003e \t\u003cli\u003eSome forms of racing don’t allow time for the proper break?in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible\u003c\/li\u003e \u003c\/ul\u003e","brand":"Hawk Performance","offers":[{"title":"Default Title","offer_id":49433035964719,"sku":"HB110E.654","price":409.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/3903\/9279\/files\/HB110E.654.jpg?v=1714107616"},{"product_id":"hawk-performance-hps-5-0-front-brake-pads-alcon-car89-18mm-6-piston-hb122b-710","title":"Hawk Performance HPS 5.0 Front Brake Pads","description":"\u003cp\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Hawk-Performance-HPS-5.0-Front-Brake-Pads-Alcon-CAR89-18mm-6-Piston-HB122B.710\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003c\/p\u003e  \u003cp\u003eFor years, engine builders have been pushing motors to the limits of their ability, and at Hawk Performance, we're closer than ever to pushing the ABS Rev Limiter to its limits. High Performance Street 5.0 pads give your vehicle the greatest stopping power and pedal feel without compromising ABS. HPS 5.0 is a Ferro-Carbon compound that provides advanced braking characteristics to enhance the driving experience. This compound combines the safety and quality of aerospace design with the braking technology of motorsports. The results are shorter stopping distances, improved performance under heavy braking conditions, and street car friendly characteristics.\u003c\/p\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eAggressive torque\u003c\/li\u003e \t\u003cli\u003eGreat rotor \u0026amp; pad wear life\u003c\/li\u003e \t\u003cli\u003eSmooth \u0026amp; predictable control\u003c\/li\u003e \t\u003cli\u003eDesigned to deliver high deceleration rates\u003c\/li\u003e \t\u003cli\u003eConsistent brake release characteristics for a smooth braking feel\u003c\/li\u003e \t\u003cli\u003eAll Hawk Performance compounds are not compatible with carbon ceramic rotors. Hawk pads are designed to work with Iron\/Metal rotors.\u003c\/li\u003e \t\u003cli\u003e38DegC-400DegC operating temperatures\u003c\/li\u003e \t\u003cli\u003e38DegC-290DegC optimal temperature range\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eTo ensure correct compatibility we always recommend comparing your existing brake pads to the pad shape diagram provided above. Vehicle fitment provided is to be used as a guide only and may not suit your vehicle.\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eAlcon CAR89 6-Piston Caliper 18mm Pad Depth\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eImportant - Installation and Brake Bedding Procedure:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003e\u003cu\u003eSTREET\u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eStreet Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eTo break in the new components, make 6 to 10 stops from approximately 30 to 35 MPH\u003c\/li\u003e \t\u003cli\u003eapplying moderate pressure.\u003c\/li\u003e \t\u003cli\u003eMake an additional 2 to 3 hard stops from approximately 40 to 45 MPH.\u003c\/li\u003e \t\u003cli\u003eDO NOT DRAG BRAKES!\u003c\/li\u003e \t\u003cli\u003eAllow 15 minutes for brake system to cool down.\u003c\/li\u003e \t\u003cli\u003eYour brakes are now ready for use and can be driven normally.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cu\u003eMOTORSPORTS \u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad\u003cbr role=\"presentation\"\u003e installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure :\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eMotorsports Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e \t\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e \t\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e \t\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e \t\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003cbr role=\"presentation\"\u003e \u003cu\u003eIMPORTANT REMINDERS WHEN BURNISHING\/BEDDING BRAKE PADS:\u003c\/u\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e \t\u003cli\u003eDo not drag brakes while car is moving during break?in procedure.\u003c\/li\u003e \t\u003cli\u003eDo not engage pedal while car is stopped at any time following the break?in procedure.\u003c\/li\u003e \t\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e \t\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e \t\u003cli\u003eClean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads.\u003c\/li\u003e \t\u003cli\u003eSome forms of racing don’t allow time for the proper break?in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Hawk-Performance-HPS-5.0-Front-Brake-Pads-Alcon-CAR89-18mm-6-Piston-HB122B.710\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003c\/p\u003e","brand":"Hawk Performance","offers":[{"title":"Default Title","offer_id":49433036095791,"sku":"HB122B.710","price":309.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/3903\/9279\/files\/HB122B.710.jpg?v=1714107616"},{"product_id":"hawk-performance-hps-5-0-front-rear-brake-pads-hsv-vy-vz-porsche-911-964-993-harrop-hb141b-650","title":"Hawk Performance HPS 5.0 Front\/Rear Brake Pads","description":"\u003cp\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Hawk-Performance-HPS-5.0-Front\/Rear-Brake-Pads-HSV-VY\/VZ\/Porsche-911-964\/993-Harrop-HB141B.650\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003c\/p\u003e  \u003cp\u003eFor years, engine builders have been pushing motors to the limits of their ability, and at Hawk Performance, we're closer than ever to pushing the ABS Rev Limiter to its limits. High Performance Street 5.0 pads give your vehicle the greatest stopping power and pedal feel without compromising ABS. HPS 5.0 is a Ferro-Carbon compound that provides advanced braking characteristics to enhance the driving experience. This compound combines the safety and quality of aerospace design with the braking technology of motorsports. The results are shorter stopping distances, improved performance under heavy braking conditions, and street car friendly characteristics.\u003c\/p\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eAggressive torque\u003c\/li\u003e \t\u003cli\u003eGreat rotor \u0026amp; pad wear life\u003c\/li\u003e \t\u003cli\u003eSmooth \u0026amp; predictable control\u003c\/li\u003e \t\u003cli\u003eDesigned to deliver high deceleration rates\u003c\/li\u003e \t\u003cli\u003eConsistent brake release characteristics for a smooth braking feel\u003c\/li\u003e \t\u003cli\u003eAll Hawk Performance compounds are not compatible with carbon ceramic rotors. Hawk pads are designed to work with Iron\/Metal rotors.\u003c\/li\u003e \t\u003cli\u003e38 ¡C-400 ¡C operating temperatures\u003c\/li\u003e \t\u003cli\u003e38 ¡C-290 ¡C optimal temperature range\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eTo ensure correct compatibility we always recommend comparing your existing brake pads to the pad shape diagram provided above. Vehicle fitment provided is to be used as a guide only and may not suit your vehicle.\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eHSV Clubsport\/Maloo\/Senator VY (Front\/Rear - 4-Piston Harrop Caliper)\u003c\/li\u003e \t\u003cli\u003eHSV Clubsport\/Maloo\/Senator VZ (Front\/Rear - 4-Piston Harrop Caliper)\u003c\/li\u003e \t\u003cli\u003e1989-1994 Porsche 911 Turbo\/Carrera 964\u003c\/li\u003e \t\u003cli\u003e1993-1998 Porsche 911 Turbo\/Carrera 993\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eImportant - Installation and Brake Bedding Procedure:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003e\u003cu\u003eSTREET\u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eStreet Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eTo break in the new components, make 6 to 10 stops from approximately 30 to 35 MPH\u003c\/li\u003e \t\u003cli\u003eapplying moderate pressure.\u003c\/li\u003e \t\u003cli\u003eMake an additional 2 to 3 hard stops from approximately 40 to 45 MPH.\u003c\/li\u003e \t\u003cli\u003eDO NOT DRAG BRAKES!\u003c\/li\u003e \t\u003cli\u003eAllow 15 minutes for brake system to cool down.\u003c\/li\u003e \t\u003cli\u003eYour brakes are now ready for use and can be driven normally.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cu\u003eMOTORSPORTS \u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad\u003cbr role=\"presentation\"\u003e installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure :\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eMotorsports Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e \t\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e \t\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e \t\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e \t\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003cbr role=\"presentation\"\u003e \u003cu\u003eIMPORTANT REMINDERS WHEN BURNISHING\/BEDDING BRAKE PADS:\u003c\/u\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e \t\u003cli\u003eDo not drag brakes while car is moving during break?in procedure.\u003c\/li\u003e \t\u003cli\u003eDo not engage pedal while car is stopped at any time following the break?in procedure.\u003c\/li\u003e \t\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e \t\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e \t\u003cli\u003eClean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads.\u003c\/li\u003e \t\u003cli\u003eSome forms of racing don’t allow time for the proper break?in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Hawk-Performance-HPS-5.0-Front\/Rear-Brake-Pads-HSV-VY\/VZ\/Porsche-911-964\/993-Harrop-HB141B.650\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003c\/p\u003e","brand":"Hawk Performance","offers":[{"title":"Default Title","offer_id":49433036226863,"sku":"HB141B.650","price":284.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/3903\/9279\/files\/HB141B.650.jpg?v=1714107615"},{"product_id":"hawk-performance-ceramic-street-brake-pads-suit-au","title":"Hawk Performance Ceramic Front\/Rear Brake Pads","description":"\u003cp\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/hawk-performance-ceramic-street-brake-pads-suit-au\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003c\/p\u003e  \u003cp\u003eHawk understands the needs of today's ceramic brake pad users and has specifically formulated our composite material to meet - and beat - the stringent low noise, ultra-low dust performance standards they have set. Engineered to reduce brake NVH (Noise, Vibration and Harshness), Performance Ceramic is a premium disc brake pad that delivers excellent performance mile after mile. Providing a linear friction profile that allows your vehicle's ABS system to operate most effectively, our unique compound has the advantage of never sacrificing power to achieve traditional ceramic pad attributes. With Hawk's PC, you can expect reduced brake pad wear, longer rotor life, and our quietest ride ever.\u003c\/p\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eExtremely quiet\u003c\/li\u003e \t\u003cli\u003eUltra-low dust\u003c\/li\u003e \t\u003cli\u003eImproved stopping power\u003c\/li\u003e \t\u003cli\u003eGentle on rotors for extended pad life\u003c\/li\u003e \t\u003cli\u003eStable friction output\u003c\/li\u003e \t\u003cli\u003eAll Hawk Performance compounds are not compatible with carbon ceramic rotors. Hawk pads are designed to work with Iron\/Metal rotors.\u003c\/li\u003e \t\u003cli\u003e38C-343C operating temperature range\u003c\/li\u003e \t\u003cli\u003e38C-232C optimal temperature range\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eTo ensure correct compatibility we always recommend comparing your existing brake pads to the pad shape diagram provided above. Vehicle fitment provided is to be used as a guide only and may not suit your vehicle.\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eHSV Clubsport\/Maloo\/Senator VY (Front\/Rear - 4-Piston Harrop Caliper)\u003c\/li\u003e \t\u003cli\u003eHSV Clubsport\/Maloo\/Senator VZ (Front\/Rear - 4-Piston Harrop Caliper)\u003c\/li\u003e \t\u003cli\u003e1989-1994 Porsche 911 Turbo\/Carrera 964\u003c\/li\u003e \t\u003cli\u003e1993-1998 Porsche 911 Turbo\/Carrera 993\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eImportant - Installation and Brake Bedding Procedure:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003e\u003cu\u003eSTREET\u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eStreet Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eTo break in the new components, make 6 to 10 stops from approximately 30 to 35 MPH\u003c\/li\u003e \t\u003cli\u003eapplying moderate pressure.\u003c\/li\u003e \t\u003cli\u003eMake an additional 2 to 3 hard stops from approximately 40 to 45 MPH.\u003c\/li\u003e \t\u003cli\u003eDO NOT DRAG BRAKES!\u003c\/li\u003e \t\u003cli\u003eAllow 15 minutes for brake system to cool down.\u003c\/li\u003e \t\u003cli\u003eYour brakes are now ready for use and can be driven normally.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cu\u003eMOTORSPORTS \u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad\u003cbr role=\"presentation\"\u003e installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure :\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eMotorsports Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e \t\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e \t\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e \t\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e \t\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003cbr role=\"presentation\"\u003e \u003cu\u003eIMPORTANT REMINDERS WHEN BURNISHING\/BEDDING BRAKE PADS:\u003c\/u\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e \t\u003cli\u003eDo not drag brakes while car is moving during break?in procedure.\u003c\/li\u003e \t\u003cli\u003eDo not engage pedal while car is stopped at any time following the break?in procedure.\u003c\/li\u003e \t\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e \t\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e \t\u003cli\u003eClean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads.\u003c\/li\u003e \t\u003cli\u003eSome forms of racing don’t allow time for the proper break?in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/hawk-performance-ceramic-street-brake-pads-suit-au\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003c\/p\u003e","brand":"Hawk Performance","offers":[{"title":"Default Title","offer_id":49433036325167,"sku":"HB141Z.650","price":309.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/3903\/9279\/files\/HB141Z.650.jpg?v=1714107614"},{"product_id":"hawk-performance-dtc-60-front-brake-pads-alcon-car89-18mm-6-piston-hb122g-710","title":"Hawk Performance DTC-60 Front Brake Pads","description":"\u003cp\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Hawk-Performance-DTC-60-Front-Brake-Pads-Alcon-CAR89-18mm-6-Piston-HB122G.710\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003c\/p\u003e  \u003cp\u003eRunning with extremely high deceleration rates and increased downforce poses different challenges, so Hawk designed DTC-60. Recommended with DTC-70 when split friction between axles is desired, it has excellent modulation and release characteristics.\u003c\/p\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eSuperior release and torque control\u003c\/li\u003e \t\u003cli\u003eVery low abrasive rotor wear\u003c\/li\u003e \t\u003cli\u003ePopular choice on lightweight front axle applications, with or without ABS\u003c\/li\u003e \t\u003cli\u003eApplicable to NASCAR\/NASCAR modified, ARCA, Super Late models, pavement circle track, Pro 2\/Pro 4 Off Road Trucks\/Pro Lite, Sports Car\/GT\/GS, Open Wheel\/Formula\u003c\/li\u003e \t\u003cli\u003eAll Hawk Performance compounds are not compatible with carbon ceramic rotors. Hawk pads are designed to work with Iron\/Metal rotors.\u003c\/li\u003e \t\u003cli\u003eHigh torque\u003c\/li\u003e \t\u003cli\u003e205 Deg C-870 Deg C operating temperatures\u003c\/li\u003e \t\u003cli\u003e370 Deg C-593 Deg C optimal temperature range\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eTo ensure correct compatibility we always recommend comparing your existing brake pads to the pad shape diagram provided above. Vehicle fitment provided is to be used as a guide only and may not suit your vehicle.\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eAlcon CAR89 6-Piston Caliper 18mm Pad Depth\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eImportant - Installation and Brake Bedding Procedure:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003e\u003cu\u003eSTREET\u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eStreet Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eTo break in the new components, make 6 to 10 stops from approximately 30 to 35 MPH\u003c\/li\u003e \t\u003cli\u003eapplying moderate pressure.\u003c\/li\u003e \t\u003cli\u003eMake an additional 2 to 3 hard stops from approximately 40 to 45 MPH.\u003c\/li\u003e \t\u003cli\u003eDO NOT DRAG BRAKES!\u003c\/li\u003e \t\u003cli\u003eAllow 15 minutes for brake system to cool down.\u003c\/li\u003e \t\u003cli\u003eYour brakes are now ready for use and can be driven normally.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cu\u003eMOTORSPORTS \u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad\u003cbr role=\"presentation\"\u003e installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure :\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eMotorsports Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e \t\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e \t\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e \t\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e \t\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003cbr role=\"presentation\"\u003e \u003cu\u003eIMPORTANT REMINDERS WHEN BURNISHING\/BEDDING BRAKE PADS:\u003c\/u\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e \t\u003cli\u003eDo not drag brakes while car is moving during break?in procedure.\u003c\/li\u003e \t\u003cli\u003eDo not engage pedal while car is stopped at any time following the break?in procedure.\u003c\/li\u003e \t\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e \t\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e \t\u003cli\u003eClean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads.\u003c\/li\u003e \t\u003cli\u003eSome forms of racing don’t allow time for the proper break?in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Hawk-Performance-DTC-60-Front-Brake-Pads-Alcon-CAR89-18mm-6-Piston-HB122G.710\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003c\/p\u003e","brand":"Hawk Performance","offers":[{"title":"Default Title","offer_id":49433036423471,"sku":"HB122G.710","price":869.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/3903\/9279\/files\/HB122G.710.jpg?v=1714107615"},{"product_id":"hawk-performance-blue-9012-front-brake-pads-mazda-mx-5-na-nb-94-04-hb149e-505","title":"Hawk Performance Blue 9012 Front Brake Pads","description":"\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Hawk-Performance-Blue-9012-Front-Brake-Pads-Mazda-MX-5-NA\/NB-94-04-HB149E.505\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003cp\u003eDesigned as an entry level endurance compound, there's nothing second-string about Hawk's Blue 9012 race compound. Easier to bed in and delivering excellent pad and rotor life, Blue 9012 is a medium torque pad developed specifically for Road, Rally and Circle Track racing.\u003c\/p\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eAll Hawk Performance compounds are not compatible with carbon ceramic rotors. Hawk pads are designed to work with Iron\/Metal rotors.\u003c\/li\u003e \t\u003cli\u003eIntermediate initial bite\u003c\/li\u003e \t\u003cli\u003eIncreased mid-mu characteristics\u003c\/li\u003e \t\u003cli\u003eMedium\u003c\/li\u003e \t\u003cli\u003e121Ã?C-538Ã?C operating temperature range\u003c\/li\u003e \t\u003cli\u003e176Ã?C-426Ã?C optimal temperature range\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eTo ensure correct compatibility we always recommend comparing your existing brake pads to the pad shape diagram provided above. Vehicle fitment provided is to be used as a guide only and may not suit your vehicle.\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003e1994-1997 Mazda MX-5 NA\u003c\/li\u003e \t\u003cli\u003e1998-2004 Mazda MX-5 NB\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImportant - Installation and Brake Bedding Procedure:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003e\u003cu\u003eSTREET\u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eStreet Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eTo break in the new components, make 6 to 10 stops from approximately 30 to 35 MPH\u003c\/li\u003e \t\u003cli\u003eapplying moderate pressure.\u003c\/li\u003e \t\u003cli\u003eMake an additional 2 to 3 hard stops from approximately 40 to 45 MPH.\u003c\/li\u003e \t\u003cli\u003eDO NOT DRAG BRAKES!\u003c\/li\u003e \t\u003cli\u003eAllow 15 minutes for brake system to cool down.\u003c\/li\u003e \t\u003cli\u003eYour brakes are now ready for use and can be driven normally.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cu\u003eMOTORSPORTS \u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad\u003cbr role=\"presentation\"\u003e installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure :\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eMotorsports Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e \t\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e \t\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e \t\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e \t\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003cbr role=\"presentation\"\u003e \u003cu\u003eIMPORTANT REMINDERS WHEN BURNISHING\/BEDDING BRAKE PADS:\u003c\/u\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e \t\u003cli\u003eDo not drag brakes while car is moving during break?in procedure.\u003c\/li\u003e \t\u003cli\u003eDo not engage pedal while car is stopped at any time following the break?in procedure.\u003c\/li\u003e \t\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e \t\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e \t\u003cli\u003eClean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads.\u003c\/li\u003e \t\u003cli\u003eSome forms of racing don’t allow time for the proper break?in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible\u003c\/li\u003e \u003c\/ul\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Hawk-Performance-Blue-9012-Front-Brake-Pads-Mazda-MX-5-NA\/NB-94-04-HB149E.505\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e","brand":"Hawk Performance","offers":[{"title":"Default Title","offer_id":49433036718383,"sku":"HB149E.505","price":329.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/3903\/9279\/files\/HB149E.505.jpg?v=1714107614"},{"product_id":"hawk-performance-hps-5-0-front-brake-pads-ap-racing-cp5060-cp5555-18mm-6-piston-hb109b-710","title":"Hawk Performance HPS 5.0 Front Brake Pads","description":"\u003cp\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Hawk-Performance-HPS-5.0-Front-Brake-Pads-AP-Racing-CP5060\/CP5555-18mm-6-Piston-HB109B.710\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003c\/p\u003e  \u003cp\u003eFor years, engine builders have been pushing motors to the limits of their ability, and at Hawk Performance, we're closer than ever to pushing the ABS Rev Limiter to its limits. High Performance Street 5.0 pads give your vehicle the greatest stopping power and pedal feel without compromising ABS. HPS 5.0 is a Ferro-Carbon compound that provides advanced braking characteristics to enhance the driving experience. This compound combines the safety and quality of aerospace design with the braking technology of motorsports. The results are shorter stopping distances, improved performance under heavy braking conditions, and street car friendly characteristics.\u003c\/p\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eAggressive torque\u003c\/li\u003e \t\u003cli\u003eGreat rotor \u0026amp; pad wear life\u003c\/li\u003e \t\u003cli\u003eSmooth \u0026amp; predictable control\u003c\/li\u003e \t\u003cli\u003eDesigned to deliver high deceleration rates\u003c\/li\u003e \t\u003cli\u003eConsistent brake release characteristics for a smooth braking feel\u003c\/li\u003e \t\u003cli\u003eAll Hawk Performance compounds are not compatible with carbon ceramic rotors. Hawk pads are designed to work with Iron\/Metal rotors.\u003c\/li\u003e \t\u003cli\u003e38 ¡C-400 ¡C operating temperatures\u003c\/li\u003e \t\u003cli\u003e38 ¡C-290 ¡C optimal temperature range\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eTo ensure correct compatibility we always recommend comparing your existing brake pads to the pad shape diagram provided above. Vehicle fitment provided is to be used as a guide only and may not suit your vehicle.\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eAlcon CAR89 6-Piston Caliper 18mm Pad Depth\u003c\/li\u003e \t\u003cli\u003eAlcon CAR89 \"TA6\" 6-Piston Caliper 18mm Pad Depth\u003c\/li\u003e \t\u003cli\u003eAP Racing CP5060-2\/3\/4\/5\/CP5555 6-Piston Caliper 18mm Pad Depth\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eImportant - Installation and Brake Bedding Procedure:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003e\u003cu\u003eSTREET\u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eStreet Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eTo break in the new components, make 6 to 10 stops from approximately 30 to 35 MPH\u003c\/li\u003e \t\u003cli\u003eapplying moderate pressure.\u003c\/li\u003e \t\u003cli\u003eMake an additional 2 to 3 hard stops from approximately 40 to 45 MPH.\u003c\/li\u003e \t\u003cli\u003eDO NOT DRAG BRAKES!\u003c\/li\u003e \t\u003cli\u003eAllow 15 minutes for brake system to cool down.\u003c\/li\u003e \t\u003cli\u003eYour brakes are now ready for use and can be driven normally.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cu\u003eMOTORSPORTS \u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad\u003cbr role=\"presentation\"\u003e installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure :\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eMotorsports Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e \t\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e \t\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e \t\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e \t\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003cbr role=\"presentation\"\u003e \u003cu\u003eIMPORTANT REMINDERS WHEN BURNISHING\/BEDDING BRAKE PADS:\u003c\/u\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e \t\u003cli\u003eDo not drag brakes while car is moving during break?in procedure.\u003c\/li\u003e \t\u003cli\u003eDo not engage pedal while car is stopped at any time following the break?in procedure.\u003c\/li\u003e \t\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e \t\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e \t\u003cli\u003eClean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads.\u003c\/li\u003e \t\u003cli\u003eSome forms of racing don’t allow time for the proper break?in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Hawk-Performance-HPS-5.0-Front-Brake-Pads-AP-Racing-CP5060\/CP5555-18mm-6-Piston-HB109B.710\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003c\/p\u003e","brand":"Hawk Performance","offers":[{"title":"Default Title","offer_id":49433036652847,"sku":"HB109B.710","price":344.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/3903\/9279\/files\/HB109B.710.jpg?v=1714107616"},{"product_id":"hawk-performance-ceramic-front-brake-pads-alcon-crb343-16mm-4-piston-hb105z-620","title":"Hawk Performance Ceramic Front Brake Pads","description":"\u003cp\u003e \u003c\/p\u003e  \u003cp\u003eHawk understands the needs of today's ceramic brake pad users and has specifically formulated our composite material to meet - and beat - the stringent low noise, ultra-low dust performance standards they have set. Engineered to reduce brake NVH (Noise, Vibration and Harshness), Performance Ceramic is a premium disc brake pad that delivers excellent performance mile after mile. Providing a linear friction profile that allows your vehicle's ABS system to operate most effectively, our unique compound has the advantage of never sacrificing power to achieve traditional ceramic pad attributes. With Hawk's PC, you can expect reduced brake pad wear, longer rotor life, and our quietest ride ever.\u003c\/p\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003e\u003cstrong\u003eSTREET USE ONLY\u003c\/strong\u003e\u003c\/li\u003e \t\u003cli\u003eExtremely quiet\u003c\/li\u003e \t\u003cli\u003eUltra-low dust\u003c\/li\u003e \t\u003cli\u003eImproved stopping power\u003c\/li\u003e \t\u003cli\u003eGentle on rotors for extended pad life\u003c\/li\u003e \t\u003cli\u003eStable friction output\u003c\/li\u003e \t\u003cli\u003eAll Hawk Performance compounds are not compatible with carbon ceramic rotors. Hawk pads are designed to work with Iron\/Metal rotors.\u003c\/li\u003e \t\u003cli\u003e38C-343C operating temperature range\u003c\/li\u003e \t\u003cli\u003e38C-232C optimal temperature range\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eTo ensure correct compatibility we always recommend comparing your existing brake pads to the pad shape diagram provided above. Vehicle fitment provided is to be used as a guide only and may not suit your vehicle.\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eAlcon CAR49 \"TA6\" 4-Piston Caliper 16mm Pad Depth\u003c\/li\u003e \t\u003cli\u003eAlcon CRB332 4-Piston Caliper 16mm Pad Depth\u003c\/li\u003e \t\u003cli\u003eAlcon CRB343 4-Piston Caliper 16mm Pad Depth\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eImportant - Installation and Brake Bedding Procedure:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003e\u003cu\u003eSTREET\u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eStreet Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eTo break in the new components, make 6 to 10 stops from approximately 30 to 35 MPH\u003c\/li\u003e \t\u003cli\u003eapplying moderate pressure.\u003c\/li\u003e \t\u003cli\u003eMake an additional 2 to 3 hard stops from approximately 40 to 45 MPH.\u003c\/li\u003e \t\u003cli\u003eDO NOT DRAG BRAKES!\u003c\/li\u003e \t\u003cli\u003eAllow 15 minutes for brake system to cool down.\u003c\/li\u003e \t\u003cli\u003eYour brakes are now ready for use and can be driven normally.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cu\u003eMOTORSPORTS \u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad\u003cbr role=\"presentation\"\u003e installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure :\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eMotorsports Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e \t\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e \t\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e \t\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e \t\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003cbr role=\"presentation\"\u003e \u003cu\u003eIMPORTANT REMINDERS WHEN BURNISHING\/BEDDING BRAKE PADS:\u003c\/u\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e \t\u003cli\u003eDo not drag brakes while car is moving during break?in procedure.\u003c\/li\u003e \t\u003cli\u003eDo not engage pedal while car is stopped at any time following the break?in procedure.\u003c\/li\u003e \t\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e \t\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e \t\u003cli\u003eClean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads.\u003c\/li\u003e \t\u003cli\u003eSome forms of racing don’t allow time for the proper break?in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible\u003c\/li\u003e \u003c\/ul\u003e","brand":"Hawk Performance","offers":[{"title":"Default Title","offer_id":49433036849455,"sku":"HB105Z.620","price":359.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/3903\/9279\/files\/HB105Z.620.jpg?v=1714107615"},{"product_id":"hawk-performance-dtc-30-front-brake-pads-alcon-car89-25mm-6-piston-hb122w-980","title":"Hawk Performance DTC-30 Front Brake Pads","description":"\u003cp\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Hawk-Performance-DTC-30-Front-Brake-Pads-Alcon-CAR89-25mm-6-Piston-HB122W.980\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003c\/p\u003e  \u003cp\u003eDTC-30 is a controllable torque, multi-purpose compound, proven effective in a range of series. It delivers superior release characteristics and smooth pedal feel and initial bite for dirt and circle tracks, NASCAR modified, drag racing, trophy trucks, pro buggies, and more.\u003c\/p\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eConsistent, smooth braking\u003c\/li\u003e \t\u003cli\u003eGood cold effectiveness\u003c\/li\u003e \t\u003cli\u003eAll Hawk Performance compounds are not compatible with carbon ceramic rotors. Hawk pads are designed to work with Iron\/Metal rotors.\u003c\/li\u003e \t\u003cli\u003eMedium torque\u003c\/li\u003e \t\u003cli\u003e38 DegC-649 DegC operating temperature range\u003c\/li\u003e \t\u003cli\u003e38 DegC-426 DegC optimal temperature range\u003c\/li\u003e \t\u003cli\u003eAll Hawk Performance compounds are not compatible with carbon ceramic rotors. Hawk pads are designed to work with Iron\/Metal rotors.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eTo ensure correct compatibility we always recommend comparing your existing brake pads to the pad shape diagram provided above. Vehicle fitment provided is to be used as a guide only and may not suit your vehicle.\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eAlcon CAR89 6-Piston Caliper 25mm Pad Depth\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eImportant - Installation and Brake Bedding Procedure:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003e\u003cu\u003eSTREET\u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eStreet Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eTo break in the new components, make 6 to 10 stops from approximately 30 to 35 MPH\u003c\/li\u003e \t\u003cli\u003eapplying moderate pressure.\u003c\/li\u003e \t\u003cli\u003eMake an additional 2 to 3 hard stops from approximately 40 to 45 MPH.\u003c\/li\u003e \t\u003cli\u003eDO NOT DRAG BRAKES!\u003c\/li\u003e \t\u003cli\u003eAllow 15 minutes for brake system to cool down.\u003c\/li\u003e \t\u003cli\u003eYour brakes are now ready for use and can be driven normally.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cu\u003eMOTORSPORTS \u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad\u003cbr role=\"presentation\"\u003e installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure :\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eMotorsports Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e \t\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e \t\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e \t\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e \t\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003cbr role=\"presentation\"\u003e \u003cu\u003eIMPORTANT REMINDERS WHEN BURNISHING\/BEDDING BRAKE PADS:\u003c\/u\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e \t\u003cli\u003eDo not drag brakes while car is moving during break?in procedure.\u003c\/li\u003e \t\u003cli\u003eDo not engage pedal while car is stopped at any time following the break?in procedure.\u003c\/li\u003e \t\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e \t\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e \t\u003cli\u003eClean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads.\u003c\/li\u003e \t\u003cli\u003eSome forms of racing don’t allow time for the proper break?in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Hawk-Performance-DTC-30-Front-Brake-Pads-Alcon-CAR89-25mm-6-Piston-HB122W.980\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003c\/p\u003e","brand":"Hawk Performance","offers":[{"title":"Default Title","offer_id":49433036980527,"sku":"HB122W.980","price":619.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/3903\/9279\/files\/HB122W.980.jpg?v=1714107616"},{"product_id":"hawk-performance-ceramic-front-brake-pads-mazda-mx-5-na-89-93-hb148z-550","title":"Hawk Performance Ceramic Front Brake Pads","description":"\u003cp\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Hawk-Performance-Ceramic-Front-Brake-Pads-Mazda-MX-5-NA-89-93-HB148Z.550\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003c\/p\u003e  \u003cp\u003eHawk understands the needs of today's ceramic brake pad users and has specifically formulated our composite material to meet - and beat - the stringent low noise, ultra-low dust performance standards they have set. Engineered to reduce brake NVH (Noise, Vibration and Harshness), Performance Ceramic is a premium disc brake pad that delivers excellent performance mile after mile. Providing a linear friction profile that allows your vehicle's ABS system to operate most effectively, our unique compound has the advantage of never sacrificing power to achieve traditional ceramic pad attributes. With Hawk's PC, you can expect reduced brake pad wear, longer rotor life, and our quietest ride ever.\u003c\/p\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003e\u003cstrong\u003eSTREET USE ONLY\u003c\/strong\u003e\u003c\/li\u003e \t\u003cli\u003eExtremely quiet\u003c\/li\u003e \t\u003cli\u003eUltra-low dust\u003c\/li\u003e \t\u003cli\u003eImproved stopping power\u003c\/li\u003e \t\u003cli\u003eGentle on rotors for extended pad life\u003c\/li\u003e \t\u003cli\u003eStable friction output\u003c\/li\u003e \t\u003cli\u003eAll Hawk Performance compounds are not compatible with carbon ceramic rotors. Hawk pads are designed to work with Iron\/Metal rotors.\u003c\/li\u003e \t\u003cli\u003e38C-343C operating temperature range\u003c\/li\u003e \t\u003cli\u003e38C-232C optimal temperature range\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eTo ensure correct compatibility we always recommend comparing your existing brake pads to the pad shape diagram provided above. Vehicle fitment provided is to be used as a guide only and may not suit your vehicle.\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003e1989-1993 Mazda MX-5 NA\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eImportant - Installation and Brake Bedding Procedure:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003e\u003cu\u003eSTREET\u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eStreet Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eTo break in the new components, make 6 to 10 stops from approximately 30 to 35 MPH\u003c\/li\u003e \t\u003cli\u003eapplying moderate pressure.\u003c\/li\u003e \t\u003cli\u003eMake an additional 2 to 3 hard stops from approximately 40 to 45 MPH.\u003c\/li\u003e \t\u003cli\u003eDO NOT DRAG BRAKES!\u003c\/li\u003e \t\u003cli\u003eAllow 15 minutes for brake system to cool down.\u003c\/li\u003e \t\u003cli\u003eYour brakes are now ready for use and can be driven normally.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cu\u003eMOTORSPORTS \u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad\u003cbr role=\"presentation\"\u003e installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure :\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eMotorsports Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e \t\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e \t\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e \t\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e \t\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003cbr role=\"presentation\"\u003e \u003cu\u003eIMPORTANT REMINDERS WHEN BURNISHING\/BEDDING BRAKE PADS:\u003c\/u\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e \t\u003cli\u003eDo not drag brakes while car is moving during break?in procedure.\u003c\/li\u003e \t\u003cli\u003eDo not engage pedal while car is stopped at any time following the break?in procedure.\u003c\/li\u003e \t\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e \t\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e \t\u003cli\u003eClean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads.\u003c\/li\u003e \t\u003cli\u003eSome forms of racing don’t allow time for the proper break?in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Hawk-Performance-Ceramic-Front-Brake-Pads-Mazda-MX-5-NA-89-93-HB148Z.550\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003c\/p\u003e","brand":"Hawk Performance","offers":[{"title":"Default Title","offer_id":49433037013295,"sku":"HB148Z.560","price":199.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/3903\/9279\/files\/HB148Z.560.jpg?v=1714107615"},{"product_id":"hawk-performance-ceramic-front-brake-pads-ap-racing-cp5060-cp5555-18mm-6-piston-hb109z-710","title":"Hawk Performance Ceramic Front Brake Pads","description":"\u003cp\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Hawk-Performance-Ceramic-Front-Brake-Pads-AP-Racing-CP5060\/CP5555-18mm-6-Piston-HB109Z.710\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003c\/p\u003e  \u003cp\u003eHawk understands the needs of today's ceramic brake pad users and has specifically formulated our composite material to meet - and beat - the stringent low noise, ultra-low dust performance standards they have set. Engineered to reduce brake NVH (Noise, Vibration and Harshness), Performance Ceramic is a premium disc brake pad that delivers excellent performance mile after mile. Providing a linear friction profile that allows your vehicle's ABS system to operate most effectively, our unique compound has the advantage of never sacrificing power to achieve traditional ceramic pad attributes. With Hawk's PC, you can expect reduced brake pad wear, longer rotor life, and our quietest ride ever.\u003c\/p\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eExtremely quiet\u003c\/li\u003e \t\u003cli\u003eUltra-low dust\u003c\/li\u003e \t\u003cli\u003eImproved stopping power\u003c\/li\u003e \t\u003cli\u003eGentle on rotors for extended pad life\u003c\/li\u003e \t\u003cli\u003eStable friction output\u003c\/li\u003e \t\u003cli\u003eAll Hawk Performance compounds are not compatible with carbon ceramic rotors. Hawk pads are designed to work with Iron\/Metal rotors.\u003c\/li\u003e \t\u003cli\u003e38C-343C operating temperature range\u003c\/li\u003e \t\u003cli\u003e38C-232C optimal temperature range\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eTo ensure correct compatibility we always recommend comparing your existing brake pads to the pad shape diagram provided above. Vehicle fitment provided is to be used as a guide only and may not suit your vehicle.\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eAlcon CAR89 6-Piston Caliper 18mm Pad Depth\u003c\/li\u003e \t\u003cli\u003eAlcon CAR89 \"TA6\" 6-Piston Caliper 18mm Pad Depth\u003c\/li\u003e \t\u003cli\u003eAP Racing CP5060-2\/3\/4\/5\/CP5555 6-Piston Caliper 18mm Pad Depth\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eImportant - Installation and Brake Bedding Procedure:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003e\u003cu\u003eSTREET\u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eStreet Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eTo break in the new components, make 6 to 10 stops from approximately 30 to 35 MPH\u003c\/li\u003e \t\u003cli\u003eapplying moderate pressure.\u003c\/li\u003e \t\u003cli\u003eMake an additional 2 to 3 hard stops from approximately 40 to 45 MPH.\u003c\/li\u003e \t\u003cli\u003eDO NOT DRAG BRAKES!\u003c\/li\u003e \t\u003cli\u003eAllow 15 minutes for brake system to cool down.\u003c\/li\u003e \t\u003cli\u003eYour brakes are now ready for use and can be driven normally.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cu\u003eMOTORSPORTS \u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad\u003cbr role=\"presentation\"\u003e installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure :\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eMotorsports Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e \t\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e \t\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e \t\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e \t\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003cbr role=\"presentation\"\u003e \u003cu\u003eIMPORTANT REMINDERS WHEN BURNISHING\/BEDDING BRAKE PADS:\u003c\/u\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e \t\u003cli\u003eDo not drag brakes while car is moving during break?in procedure.\u003c\/li\u003e \t\u003cli\u003eDo not engage pedal while car is stopped at any time following the break?in procedure.\u003c\/li\u003e \t\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e \t\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e \t\u003cli\u003eClean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads.\u003c\/li\u003e \t\u003cli\u003eSome forms of racing don’t allow time for the proper break?in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Hawk-Performance-Ceramic-Front-Brake-Pads-AP-Racing-CP5060\/CP5555-18mm-6-Piston-HB109Z.710\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003c\/p\u003e","brand":"Hawk Performance","offers":[{"title":"Default Title","offer_id":49433037144367,"sku":"HB109Z.710","price":319.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/3903\/9279\/files\/HB109Z.710.jpg?v=1714107615"},{"product_id":"hawk-performance-dtc-30-front-brake-pads-alcon-crb343-16mm-4-piston-hb105w-620","title":"Hawk Performance DTC-30 Front Brake Pads","description":"\u003cp\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Hawk-Performance-DTC-30-Front-Brake-Pads-Alcon-CRB343-16mm-4-Piston-HB105W.620\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003c\/p\u003e  \u003cp\u003eDTC-30 is a controllable torque, multi-purpose compound, proven effective in a range of series. It delivers superior release characteristics and smooth pedal feel and initial bite for dirt and circle tracks, NASCAR modified, drag racing, trophy trucks, pro buggies, and more.\u003c\/p\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eConsistent, smooth braking\u003c\/li\u003e \t\u003cli\u003eGood cold effectiveness\u003c\/li\u003e \t\u003cli\u003eAll Hawk Performance compounds are not compatible with carbon ceramic rotors. Hawk pads are designed to work with Iron\/Metal rotors.\u003c\/li\u003e \t\u003cli\u003eMedium torque\u003c\/li\u003e \t\u003cli\u003e38 DegC-649 DegC operating temperature range\u003c\/li\u003e \t\u003cli\u003e38 DegC-426 DegC optimal temperature range\u003c\/li\u003e \t\u003cli\u003eAll Hawk Performance compounds are not compatible with carbon ceramic rotors. Hawk pads are designed to work with Iron\/Metal rotors.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eTo ensure correct compatibility we always recommend comparing your existing brake pads to the pad shape diagram provided above. Vehicle fitment provided is to be used as a guide only and may not suit your vehicle.\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eAlcon CAR49 \"TA6\" 4-Piston Caliper 16mm Pad Depth\u003c\/li\u003e \t\u003cli\u003eAlcon CRB332 4-Piston Caliper 16mm Pad Depth\u003c\/li\u003e \t\u003cli\u003eAlcon CRB343 4-Piston Caliper 16mm Pad Depth\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eImportant - Installation and Brake Bedding Procedure:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003e\u003cu\u003eSTREET\u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eStreet Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eTo break in the new components, make 6 to 10 stops from approximately 30 to 35 MPH\u003c\/li\u003e \t\u003cli\u003eapplying moderate pressure.\u003c\/li\u003e \t\u003cli\u003eMake an additional 2 to 3 hard stops from approximately 40 to 45 MPH.\u003c\/li\u003e \t\u003cli\u003eDO NOT DRAG BRAKES!\u003c\/li\u003e \t\u003cli\u003eAllow 15 minutes for brake system to cool down.\u003c\/li\u003e \t\u003cli\u003eYour brakes are now ready for use and can be driven normally.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cu\u003eMOTORSPORTS \u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad\u003cbr role=\"presentation\"\u003e installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure :\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eMotorsports Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e \t\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e \t\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e \t\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e \t\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003cbr role=\"presentation\"\u003e \u003cu\u003eIMPORTANT REMINDERS WHEN BURNISHING\/BEDDING BRAKE PADS:\u003c\/u\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e \t\u003cli\u003eDo not drag brakes while car is moving during break?in procedure.\u003c\/li\u003e \t\u003cli\u003eDo not engage pedal while car is stopped at any time following the break?in procedure.\u003c\/li\u003e \t\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e \t\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e \t\u003cli\u003eClean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads.\u003c\/li\u003e \t\u003cli\u003eSome forms of racing don’t allow time for the proper break?in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Hawk-Performance-DTC-30-Front-Brake-Pads-Alcon-CRB343-16mm-4-Piston-HB105W.620\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003c\/p\u003e","brand":"Hawk Performance","offers":[{"title":"Default Title","offer_id":49433037242671,"sku":"HB105W.620","price":609.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/3903\/9279\/files\/HB105W.620.jpg?v=1714107615"},{"product_id":"hawk-performance-ht-10-brake-pads-ap-racing-formula-ford-2000-hb108s-560","title":"Hawk Performance HT-10 Brake Pads","description":"\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Hawk-Performance-HT-10-Brake-Pads-AP-Racing\/Formula-Ford-2000-HB108S.560\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003cp\u003eFor linear in-braking in a medium temperature range, look no further than HT-10. It delivers smooth, controllable initial bite and consistent pedal feel. It's no wonder Hawk's legacy friction products have become the choice of champions.\u003c\/p\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eGood static and dynamic coefficient\u003c\/li\u003e \t\u003cli\u003e Excellent modulation characteristics\u003c\/li\u003e \t\u003cli\u003eAll Hawk Performance compounds are not compatible with carbon ceramic rotors. Hawk pads are designed to work with Iron\/Metal rotors.\u003c\/li\u003e \t\u003cli\u003eHigh torque\u003c\/li\u003e \t\u003cli\u003e150C-700C operating temperatures\u003c\/li\u003e \t\u003cli\u003e260C-565C optimal temperature range\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eTo ensure correct compatibility we always recommend comparing your existing brake pads to the pad shape diagram provided above. Vehicle fitment provided is to be used as a guide only and may not suit your vehicle.\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eFormula Ford 2000 (AP Racing)\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImportant - Installation and Brake Bedding Procedure:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003e\u003cu\u003eSTREET\u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eStreet Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eTo break in the new components, make 6 to 10 stops from approximately 30 to 35 MPH\u003c\/li\u003e \t\u003cli\u003eapplying moderate pressure.\u003c\/li\u003e \t\u003cli\u003eMake an additional 2 to 3 hard stops from approximately 40 to 45 MPH.\u003c\/li\u003e \t\u003cli\u003eDO NOT DRAG BRAKES!\u003c\/li\u003e \t\u003cli\u003eAllow 15 minutes for brake system to cool down.\u003c\/li\u003e \t\u003cli\u003eYour brakes are now ready for use and can be driven normally.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cu\u003eMOTORSPORTS \u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad\u003cbr role=\"presentation\"\u003e installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure :\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eMotorsports Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e \t\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e \t\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e \t\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e \t\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003cbr role=\"presentation\"\u003e \u003cu\u003eIMPORTANT REMINDERS WHEN BURNISHING\/BEDDING BRAKE PADS:\u003c\/u\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e \t\u003cli\u003eDo not drag brakes while car is moving during break?in procedure.\u003c\/li\u003e \t\u003cli\u003eDo not engage pedal while car is stopped at any time following the break?in procedure.\u003c\/li\u003e \t\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e \t\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e \t\u003cli\u003eClean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads.\u003c\/li\u003e \t\u003cli\u003eSome forms of racing don’t allow time for the proper break?in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible\u003c\/li\u003e \u003c\/ul\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Hawk-Performance-HT-10-Brake-Pads-AP-Racing\/Formula-Ford-2000-HB108S.560\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e","brand":"Hawk Performance","offers":[{"title":"Default Title","offer_id":49433037373743,"sku":"HB108S.560","price":354.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/3903\/9279\/files\/HB108S.560.jpg?v=1714107617"},{"product_id":"hawk-performance-hp-front-brake-pads-mazda-mx-5-na-233450","title":"Hawk Performance HP+ Front Brake Pads","description":"\u003ca href=\"https:\/\/www.prospeedracing.com.au\/hawk-performance-hp-front-brake-pads-mazda-mx-5-na~233450\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003cp\u003eHP Plus utilizes a unique Ferro-Carbon, high-tech friction material that was developed and manufactured for sport driving in autocross, Solo II and Ã’track dayÓ applications. The Ferro-Carbon formulation offers lower wear rates and higher torque values than other competitive materials.\u003c\/p\u003e  \u003cp\u003eExtremely high coefficient of friction makes HP Plus the perfect upgrade over stock for high performance streetcars used in autocross competition or that experience repetitive, heavy braking.\u003c\/p\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eLow to mid temperature range\u003c\/li\u003e \t\u003cli\u003eFade resistant\u003c\/li\u003e \t\u003cli\u003eSmooth \u0026amp; predictable torque\u003c\/li\u003e \t\u003cli\u003eIdeal for Autocross \u0026amp; club racing events\u003c\/li\u003e \t\u003cli\u003eAll Hawk Performance compounds are not compatible with carbon ceramic rotors. Hawk pads are designed to work with Iron\/Metal rotors.\u003c\/li\u003e \t\u003cli\u003eLow torque\u003c\/li\u003e \t\u003cli\u003e38 Deg C-425 Deg C operating temperatures\u003c\/li\u003e \t\u003cli\u003e149 Deg C-315 Deg C optimal temperature range\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eTo ensure correct compatibility we always recommend comparing your existing brake pads to the pad shape diagram provided above. Vehicle fitment provided is to be used as a guide only and may not suit your vehicle.\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003e1994-1997 Mazda MX-5 NA\u003c\/li\u003e \t\u003cli\u003e1998-2004 Mazda MX-5 NB\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImportant - Installation and Brake Bedding Procedure:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003e\u003cu\u003eSTREET\u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eStreet Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eTo break in the new components, make 6 to 10 stops from approximately 30 to 35 MPH\u003c\/li\u003e \t\u003cli\u003eapplying moderate pressure.\u003c\/li\u003e \t\u003cli\u003eMake an additional 2 to 3 hard stops from approximately 40 to 45 MPH.\u003c\/li\u003e \t\u003cli\u003eDO NOT DRAG BRAKES!\u003c\/li\u003e \t\u003cli\u003eAllow 15 minutes for brake system to cool down.\u003c\/li\u003e \t\u003cli\u003eYour brakes are now ready for use and can be driven normally.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cu\u003eMOTORSPORTS \u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad\u003cbr role=\"presentation\"\u003e installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure :\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eMotorsports Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e \t\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e \t\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e \t\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e \t\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003cbr role=\"presentation\"\u003e \u003cu\u003eIMPORTANT REMINDERS WHEN BURNISHING\/BEDDING BRAKE PADS:\u003c\/u\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e \t\u003cli\u003eDo not drag brakes while car is moving during break?in procedure.\u003c\/li\u003e \t\u003cli\u003eDo not engage pedal while car is stopped at any time following the break?in procedure.\u003c\/li\u003e \t\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e \t\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e \t\u003cli\u003eClean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads.\u003c\/li\u003e \t\u003cli\u003eSome forms of racing don’t allow time for the proper break?in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible\u003c\/li\u003e \u003c\/ul\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/hawk-performance-hp-front-brake-pads-mazda-mx-5-na~233450\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e","brand":"Hawk Performance","offers":[{"title":"Default Title","offer_id":49433037668655,"sku":"HB149N.505","price":229.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/3903\/9279\/files\/HB149N.505.jpg?v=1714107626"},{"product_id":"hawk-performance-ceramic-front-brake-pads-mazda-mx-5-na-nb-94-04-hb149z-505","title":"Hawk Performance Ceramic Front Brake Pads","description":"\u003cp\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Hawk-Performance-Ceramic-Front-Brake-Pads-Mazda-MX-5-NA\/NB-94-04-HB149Z.505\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003c\/p\u003e  \u003cp\u003eHawk understands the needs of today's ceramic brake pad users and has specifically formulated our composite material to meet - and beat - the stringent low noise, ultra-low dust performance standards they have set. Engineered to reduce brake NVH (Noise, Vibration and Harshness), Performance Ceramic is a premium disc brake pad that delivers excellent performance mile after mile. Providing a linear friction profile that allows your vehicle's ABS system to operate most effectively, our unique compound has the advantage of never sacrificing power to achieve traditional ceramic pad attributes. With Hawk's PC, you can expect reduced brake pad wear, longer rotor life, and our quietest ride ever.\u003c\/p\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003e\u003cstrong\u003eSTREET USE ONLY\u003c\/strong\u003e\u003c\/li\u003e \t\u003cli\u003eExtremely quiet\u003c\/li\u003e \t\u003cli\u003eUltra-low dust\u003c\/li\u003e \t\u003cli\u003eImproved stopping power\u003c\/li\u003e \t\u003cli\u003eGentle on rotors for extended pad life\u003c\/li\u003e \t\u003cli\u003eStable friction output\u003c\/li\u003e \t\u003cli\u003eAll Hawk Performance compounds are not compatible with carbon ceramic rotors. Hawk pads are designed to work with Iron\/Metal rotors.\u003c\/li\u003e \t\u003cli\u003e38C-343C operating temperature range\u003c\/li\u003e \t\u003cli\u003e38C-232C optimal temperature range\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eTo ensure correct compatibility we always recommend comparing your existing brake pads to the pad shape diagram provided above. Vehicle fitment provided is to be used as a guide only and may not suit your vehicle.\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003e1994-1997 Mazda MX-5 NA\u003c\/li\u003e \t\u003cli\u003e1998-2004 Mazda MX-5 NB\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eImportant - Installation and Brake Bedding Procedure:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003e\u003cu\u003eSTREET\u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eStreet Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eTo break in the new components, make 6 to 10 stops from approximately 30 to 35 MPH\u003c\/li\u003e \t\u003cli\u003eapplying moderate pressure.\u003c\/li\u003e \t\u003cli\u003eMake an additional 2 to 3 hard stops from approximately 40 to 45 MPH.\u003c\/li\u003e \t\u003cli\u003eDO NOT DRAG BRAKES!\u003c\/li\u003e \t\u003cli\u003eAllow 15 minutes for brake system to cool down.\u003c\/li\u003e \t\u003cli\u003eYour brakes are now ready for use and can be driven normally.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cu\u003eMOTORSPORTS \u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad\u003cbr role=\"presentation\"\u003e installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure :\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eMotorsports Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e \t\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e \t\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e \t\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e \t\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003cbr role=\"presentation\"\u003e \u003cu\u003eIMPORTANT REMINDERS WHEN BURNISHING\/BEDDING BRAKE PADS:\u003c\/u\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e \t\u003cli\u003eDo not drag brakes while car is moving during break?in procedure.\u003c\/li\u003e \t\u003cli\u003eDo not engage pedal while car is stopped at any time following the break?in procedure.\u003c\/li\u003e \t\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e \t\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e \t\u003cli\u003eClean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads.\u003c\/li\u003e \t\u003cli\u003eSome forms of racing don’t allow time for the proper break?in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Hawk-Performance-Ceramic-Front-Brake-Pads-Mazda-MX-5-NA\/NB-94-04-HB149Z.505\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003c\/p\u003e","brand":"Hawk Performance","offers":[{"title":"Default Title","offer_id":49433037799727,"sku":"HB149Z.505","price":229.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/3903\/9279\/files\/HB149Z.505.jpg?v=1714107630"},{"product_id":"hawk-performance-hps-5-0-front-brake-pads-mazda-rx-7-fc-87-91-fd-93-02-hb155b-580","title":"Hawk Performance HPS 5.0 Front Brake Pads","description":"\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Hawk-Performance-HPS-5.0-Front-Brake-Pads-Mazda-RX-7-FC-87-91\/FD-93-02-HB155B.580\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003cp\u003eFor years, engine builders have been pushing motors to the limits of their ability, and at Hawk Performance, we're closer than ever to pushing the ABS Rev Limiter to its limits. High Performance Street 5.0 pads give your vehicle the greatest stopping power and pedal feel without compromising ABS. HPS 5.0 is a Ferro-Carbon compound that provides advanced braking characteristics to enhance the driving experience. This compound combines the safety and quality of aerospace design with the braking technology of motorsports. The results are shorter stopping distances, improved performance under heavy braking conditions, and street car friendly characteristics.\u003c\/p\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003e\u003cstrong\u003eSTREET USE ONLY\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eAggressive torque\u003c\/li\u003e \t\u003cli\u003eGreat rotor \u0026amp; pad wear life\u003c\/li\u003e \t\u003cli\u003eSmooth \u0026amp; predictable control\u003c\/li\u003e \t\u003cli\u003eDesigned to deliver high deceleration rates\u003c\/li\u003e \t\u003cli\u003eConsistent brake release characteristics for a smooth braking feel\u003c\/li\u003e \t\u003cli\u003eAll Hawk Performance compounds are not compatible with carbon ceramic rotors. Hawk pads are designed to work with Iron\/Metal rotors.\u003c\/li\u003e \t\u003cli\u003e38 ¡C-400 ¡C operating temperatures\u003c\/li\u003e \t\u003cli\u003e38 ¡C-290 ¡C optimal temperature range\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eTo ensure correct compatibility we always recommend comparing your existing brake pads to the pad shape diagram provided above. Vehicle fitment provided is to be used as a guide only and may not suit your vehicle.\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003e1987-1991 Mazda RX-7 FC\u003c\/li\u003e \t\u003cli\u003e1992-2002 Mazda RX-7 FD\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImportant - Installation and Brake Bedding Procedure:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003e\u003cu\u003eSTREET\u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eStreet Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eTo break in the new components, make 6 to 10 stops from approximately 30 to 35 MPH\u003c\/li\u003e \t\u003cli\u003eapplying moderate pressure.\u003c\/li\u003e \t\u003cli\u003eMake an additional 2 to 3 hard stops from approximately 40 to 45 MPH.\u003c\/li\u003e \t\u003cli\u003eDO NOT DRAG BRAKES!\u003c\/li\u003e \t\u003cli\u003eAllow 15 minutes for brake system to cool down.\u003c\/li\u003e \t\u003cli\u003eYour brakes are now ready for use and can be driven normally.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cu\u003eMOTORSPORTS \u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad\u003cbr role=\"presentation\"\u003e installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure :\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eMotorsports Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e \t\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e \t\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e \t\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e \t\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003cbr role=\"presentation\"\u003e \u003cu\u003eIMPORTANT REMINDERS WHEN BURNISHING\/BEDDING BRAKE PADS:\u003c\/u\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e \t\u003cli\u003eDo not drag brakes while car is moving during break?in procedure.\u003c\/li\u003e \t\u003cli\u003eDo not engage pedal while car is stopped at any time following the break?in procedure.\u003c\/li\u003e \t\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e \t\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e \t\u003cli\u003eClean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads.\u003c\/li\u003e \t\u003cli\u003eSome forms of racing don’t allow time for the proper break?in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible\u003c\/li\u003e \u003c\/ul\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Hawk-Performance-HPS-5.0-Front-Brake-Pads-Mazda-RX-7-FC-87-91\/FD-93-02-HB155B.580\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e","brand":"Hawk Performance","offers":[{"title":"Default Title","offer_id":49433037832495,"sku":"HB155B.580","price":224.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/3903\/9279\/files\/HB155B.580.jpg?v=1714107631"},{"product_id":"hawk-performance-hp-front-brake-pads-mazda-rx-7-fc","title":"Hawk Performance HP+ Front Brake Pads","description":"\u003ca href=\"https:\/\/www.prospeedracing.com.au\/hawk-performance-hp-front-brake-pads-mazda-rx-7-fc\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003cp\u003eHP Plus utilizes a unique Ferro-Carbon, high-tech friction material that was developed and manufactured for sport driving in autocross, Solo II and Ã’track dayÓ applications. The Ferro-Carbon formulation offers lower wear rates and higher torque values than other competitive materials.\u003c\/p\u003e  \u003cp\u003eExtremely high coefficient of friction makes HP Plus the perfect upgrade over stock for high performance streetcars used in autocross competition or that experience repetitive, heavy braking.\u003c\/p\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eLow to mid temperature range\u003c\/li\u003e \t\u003cli\u003eFade resistant\u003c\/li\u003e \t\u003cli\u003eSmooth \u0026amp; predictable torque\u003c\/li\u003e \t\u003cli\u003eIdeal for Autocross \u0026amp; club racing events\u003c\/li\u003e \t\u003cli\u003eAll Hawk Performance compounds are not compatible with carbon ceramic rotors. Hawk pads are designed to work with Iron\/Metal rotors.\u003c\/li\u003e \t\u003cli\u003eLow torque\u003c\/li\u003e \t\u003cli\u003e38 Deg C-425 Deg C operating temperatures\u003c\/li\u003e \t\u003cli\u003e149 Deg C-315 Deg C optimal temperature range\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eTo ensure correct compatibility we always recommend comparing your existing brake pads to the pad shape diagram provided above. Vehicle fitment provided is to be used as a guide only and may not suit your vehicle.\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003e1987-1991 Mazda RX-7 FC\u003c\/li\u003e \t\u003cli\u003e1992-2002 Mazda RX-7 FD\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImportant - Installation and Brake Bedding Procedure:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003e\u003cu\u003eSTREET\u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eStreet Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eTo break in the new components, make 6 to 10 stops from approximately 30 to 35 MPH\u003c\/li\u003e \t\u003cli\u003eapplying moderate pressure.\u003c\/li\u003e \t\u003cli\u003eMake an additional 2 to 3 hard stops from approximately 40 to 45 MPH.\u003c\/li\u003e \t\u003cli\u003eDO NOT DRAG BRAKES!\u003c\/li\u003e \t\u003cli\u003eAllow 15 minutes for brake system to cool down.\u003c\/li\u003e \t\u003cli\u003eYour brakes are now ready for use and can be driven normally.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cu\u003eMOTORSPORTS \u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad\u003cbr role=\"presentation\"\u003e installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure :\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eMotorsports Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e \t\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e \t\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e \t\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e \t\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003cbr role=\"presentation\"\u003e \u003cu\u003eIMPORTANT REMINDERS WHEN BURNISHING\/BEDDING BRAKE PADS:\u003c\/u\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e \t\u003cli\u003eDo not drag brakes while car is moving during break?in procedure.\u003c\/li\u003e \t\u003cli\u003eDo not engage pedal while car is stopped at any time following the break?in procedure.\u003c\/li\u003e \t\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e \t\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e \t\u003cli\u003eClean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads.\u003c\/li\u003e \t\u003cli\u003eSome forms of racing don’t allow time for the proper break?in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible\u003c\/li\u003e \u003c\/ul\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/hawk-performance-hp-front-brake-pads-mazda-rx-7-fc\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e","brand":"Hawk Performance","offers":[{"title":"Default Title","offer_id":49433037898031,"sku":"HB155N.580","price":264.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/3903\/9279\/files\/HB155N.580.jpg?v=1714107632"},{"product_id":"hawk-performance-hps-5-0-rear-brake-pads-mazda-rx-7-fc-87-91-fd-93-02-hb158b-515","title":"Hawk Performance HPS 5.0 Rear Brake Pads","description":"\u003cp\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Hawk-Performance-HPS-5.0-Rear-Brake-Pads-Mazda-RX-7-FC-87-91\/FD-93-02-HB158B.515\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003c\/p\u003e  \u003cp\u003eFor years, engine builders have been pushing motors to the limits of their ability, and at Hawk Performance, we're closer than ever to pushing the ABS Rev Limiter to its limits. High Performance Street 5.0 pads give your vehicle the greatest stopping power and pedal feel without compromising ABS. HPS 5.0 is a Ferro-Carbon compound that provides advanced braking characteristics to enhance the driving experience. This compound combines the safety and quality of aerospace design with the braking technology of motorsports. The results are shorter stopping distances, improved performance under heavy braking conditions, and street car friendly characteristics.\u003c\/p\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003e\u003cstrong\u003eSTREET USE ONLY\u003c\/strong\u003e\u003c\/li\u003e \t\u003cli\u003eAggressive torque\u003c\/li\u003e \t\u003cli\u003eGreat rotor \u0026amp; pad wear life\u003c\/li\u003e \t\u003cli\u003eSmooth \u0026amp; predictable control\u003c\/li\u003e \t\u003cli\u003eDesigned to deliver high deceleration rates\u003c\/li\u003e \t\u003cli\u003eConsistent brake release characteristics for a smooth braking feel\u003c\/li\u003e \t\u003cli\u003eAll Hawk Performance compounds are not compatible with carbon ceramic rotors. Hawk pads are designed to work with Iron\/Metal rotors.\u003c\/li\u003e \t\u003cli\u003e38 ¡C-400 ¡C operating temperatures\u003c\/li\u003e \t\u003cli\u003e38 ¡C-290 ¡C optimal temperature range\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eTo ensure correct compatibility we always recommend comparing your existing brake pads to the pad shape diagram provided above. Vehicle fitment provided is to be used as a guide only and may not suit your vehicle.\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003e1987-1991 Mazda RX-7 FC\u003c\/li\u003e \t\u003cli\u003e1992-2002 Mazda RX-7 FD\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eImportant - Installation and Brake Bedding Procedure:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003e\u003cu\u003eSTREET\u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eStreet Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eTo break in the new components, make 6 to 10 stops from approximately 30 to 35 MPH\u003c\/li\u003e \t\u003cli\u003eapplying moderate pressure.\u003c\/li\u003e \t\u003cli\u003eMake an additional 2 to 3 hard stops from approximately 40 to 45 MPH.\u003c\/li\u003e \t\u003cli\u003eDO NOT DRAG BRAKES!\u003c\/li\u003e \t\u003cli\u003eAllow 15 minutes for brake system to cool down.\u003c\/li\u003e \t\u003cli\u003eYour brakes are now ready for use and can be driven normally.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cu\u003eMOTORSPORTS \u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad\u003cbr role=\"presentation\"\u003e installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure :\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eMotorsports Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e \t\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e \t\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e \t\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e \t\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003cbr role=\"presentation\"\u003e \u003cu\u003eIMPORTANT REMINDERS WHEN BURNISHING\/BEDDING BRAKE PADS:\u003c\/u\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e \t\u003cli\u003eDo not drag brakes while car is moving during break?in procedure.\u003c\/li\u003e \t\u003cli\u003eDo not engage pedal while car is stopped at any time following the break?in procedure.\u003c\/li\u003e \t\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e \t\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e \t\u003cli\u003eClean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads.\u003c\/li\u003e \t\u003cli\u003eSome forms of racing don’t allow time for the proper break?in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Hawk-Performance-HPS-5.0-Rear-Brake-Pads-Mazda-RX-7-FC-87-91\/FD-93-02-HB158B.515\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003c\/p\u003e","brand":"Hawk Performance","offers":[{"title":"Default Title","offer_id":49433038127407,"sku":"HB158B.515","price":204.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/3903\/9279\/files\/HB158B.515.jpg?v=1714107634"},{"product_id":"hawk-performance-hp-rear-brake-pads-mazda-rx-7-fc","title":"Hawk Performance HP+ Rear Brake Pads","description":"\u003ca href=\"https:\/\/www.prospeedracing.com.au\/hawk-performance-hp-rear-brake-pads-mazda-rx-7-fc\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003cp\u003eHP Plus utilizes a unique Ferro-Carbon, high-tech friction material that was developed and manufactured for sport driving in autocross, Solo II and Ã’track dayÓ applications. The Ferro-Carbon formulation offers lower wear rates and higher torque values than other competitive materials.\u003c\/p\u003e  \u003cp\u003eExtremely high coefficient of friction makes HP Plus the perfect upgrade over stock for high performance streetcars used in autocross competition or that experience repetitive, heavy braking.\u003c\/p\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eLow to mid temperature range\u003c\/li\u003e \t\u003cli\u003eFade resistant\u003c\/li\u003e \t\u003cli\u003eSmooth \u0026amp; predictable torque\u003c\/li\u003e \t\u003cli\u003eIdeal for Autocross \u0026amp; club racing events\u003c\/li\u003e \t\u003cli\u003eAll Hawk Performance compounds are not compatible with carbon ceramic rotors. Hawk pads are designed to work with Iron\/Metal rotors.\u003c\/li\u003e \t\u003cli\u003eLow torque\u003c\/li\u003e \t\u003cli\u003e38 Deg C-425 Deg C operating temperatures\u003c\/li\u003e \t\u003cli\u003e149 Deg C-315 Deg C optimal temperature range\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eTo ensure correct compatibility we always recommend comparing your existing brake pads to the pad shape diagram provided above. Vehicle fitment provided is to be used as a guide only and may not suit your vehicle.\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003e1987-1991 Mazda RX-7 FC\u003c\/li\u003e \t\u003cli\u003e1992-2002 Mazda RX-7 FD\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImportant - Installation and Brake Bedding Procedure:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003e\u003cu\u003eSTREET\u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eStreet Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eTo break in the new components, make 6 to 10 stops from approximately 30 to 35 MPH\u003c\/li\u003e \t\u003cli\u003eapplying moderate pressure.\u003c\/li\u003e \t\u003cli\u003eMake an additional 2 to 3 hard stops from approximately 40 to 45 MPH.\u003c\/li\u003e \t\u003cli\u003eDO NOT DRAG BRAKES!\u003c\/li\u003e \t\u003cli\u003eAllow 15 minutes for brake system to cool down.\u003c\/li\u003e \t\u003cli\u003eYour brakes are now ready for use and can be driven normally.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cu\u003eMOTORSPORTS \u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad\u003cbr role=\"presentation\"\u003e installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure :\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eMotorsports Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e \t\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e \t\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e \t\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e \t\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003cbr role=\"presentation\"\u003e \u003cu\u003eIMPORTANT REMINDERS WHEN BURNISHING\/BEDDING BRAKE PADS:\u003c\/u\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e \t\u003cli\u003eDo not drag brakes while car is moving during break?in procedure.\u003c\/li\u003e \t\u003cli\u003eDo not engage pedal while car is stopped at any time following the break?in procedure.\u003c\/li\u003e \t\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e \t\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e \t\u003cli\u003eClean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads.\u003c\/li\u003e \t\u003cli\u003eSome forms of racing don’t allow time for the proper break?in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible\u003c\/li\u003e \u003c\/ul\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/hawk-performance-hp-rear-brake-pads-mazda-rx-7-fc\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e","brand":"Hawk Performance","offers":[{"title":"Default Title","offer_id":49433038225711,"sku":"HB158N.515","price":214.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/3903\/9279\/files\/HB158N.515.jpg?v=1714107634"},{"product_id":"hawk-performance-ceramic-rear-brake-pads-mazda-mx-5-na-nb-94-04-hb159z-492","title":"Hawk Performance Ceramic Rear Brake Pads","description":"\u003cp\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Hawk-Performance-Ceramic-Rear-Brake-Pads-Mazda-MX-5-NA\/NB-94-04-HB159Z.492\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003c\/p\u003e  \u003cp\u003eHawk understands the needs of today's ceramic brake pad users and has specifically formulated our composite material to meet - and beat - the stringent low noise, ultra-low dust performance standards they have set. Engineered to reduce brake NVH (Noise, Vibration and Harshness), Performance Ceramic is a premium disc brake pad that delivers excellent performance mile after mile. Providing a linear friction profile that allows your vehicle's ABS system to operate most effectively, our unique compound has the advantage of never sacrificing power to achieve traditional ceramic pad attributes. With Hawk's PC, you can expect reduced brake pad wear, longer rotor life, and our quietest ride ever.\u003c\/p\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003e\u003cstrong\u003eSTREET USE ONLY\u003c\/strong\u003e\u003c\/li\u003e \t\u003cli\u003eExtremely quiet\u003c\/li\u003e \t\u003cli\u003eUltra-low dust\u003c\/li\u003e \t\u003cli\u003eImproved stopping power\u003c\/li\u003e \t\u003cli\u003eGentle on rotors for extended pad life\u003c\/li\u003e \t\u003cli\u003eStable friction output\u003c\/li\u003e \t\u003cli\u003eAll Hawk Performance compounds are not compatible with carbon ceramic rotors. Hawk pads are designed to work with Iron\/Metal rotors.\u003c\/li\u003e \t\u003cli\u003e38C-343C operating temperature range\u003c\/li\u003e \t\u003cli\u003e38C-232C optimal temperature range\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eTo ensure correct compatibility we always recommend comparing your existing brake pads to the pad shape diagram provided above. Vehicle fitment provided is to be used as a guide only and may not suit your vehicle.\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003e1994-1997 Mazda MX-5 NA\u003c\/li\u003e \t\u003cli\u003e1998-2004 Mazda MX-5 NB\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eImportant - Installation and Brake Bedding Procedure:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003e\u003cu\u003eSTREET\u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eStreet Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eTo break in the new components, make 6 to 10 stops from approximately 30 to 35 MPH\u003c\/li\u003e \t\u003cli\u003eapplying moderate pressure.\u003c\/li\u003e \t\u003cli\u003eMake an additional 2 to 3 hard stops from approximately 40 to 45 MPH.\u003c\/li\u003e \t\u003cli\u003eDO NOT DRAG BRAKES!\u003c\/li\u003e \t\u003cli\u003eAllow 15 minutes for brake system to cool down.\u003c\/li\u003e \t\u003cli\u003eYour brakes are now ready for use and can be driven normally.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cu\u003eMOTORSPORTS \u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad\u003cbr role=\"presentation\"\u003e installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure :\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eMotorsports Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e \t\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e \t\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e \t\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e \t\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003cbr role=\"presentation\"\u003e \u003cu\u003eIMPORTANT REMINDERS WHEN BURNISHING\/BEDDING BRAKE PADS:\u003c\/u\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e \t\u003cli\u003eDo not drag brakes while car is moving during break?in procedure.\u003c\/li\u003e \t\u003cli\u003eDo not engage pedal while car is stopped at any time following the break?in procedure.\u003c\/li\u003e \t\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e \t\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e \t\u003cli\u003eClean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads.\u003c\/li\u003e \t\u003cli\u003eSome forms of racing don’t allow time for the proper break?in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Hawk-Performance-Ceramic-Rear-Brake-Pads-Mazda-MX-5-NA\/NB-94-04-HB159Z.492\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003c\/p\u003e","brand":"Hawk Performance","offers":[{"title":"Default Title","offer_id":49433038520623,"sku":"HB159Z.492","price":174.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/3903\/9279\/files\/HB159Z.492.jpg?v=1714107635"},{"product_id":"hawk-performance-hp-rear-brake-pads-mazda-mx-5-na-233458","title":"Hawk Performance HP+ Rear Brake Pads","description":"\u003ca href=\"https:\/\/www.prospeedracing.com.au\/hawk-performance-hp-rear-brake-pads-mazda-mx-5-na~233458\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003cp\u003eHP Plus utilizes a unique Ferro-Carbon, high-tech friction material that was developed and manufactured for sport driving in autocross, Solo II and Ã’track dayÓ applications. The Ferro-Carbon formulation offers lower wear rates and higher torque values than other competitive materials.\u003c\/p\u003e  \u003cp\u003eExtremely high coefficient of friction makes HP Plus the perfect upgrade over stock for high performance streetcars used in autocross competition or that experience repetitive, heavy braking.\u003c\/p\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eLow to mid temperature range\u003c\/li\u003e \t\u003cli\u003eFade resistant\u003c\/li\u003e \t\u003cli\u003eSmooth \u0026amp; predictable torque\u003c\/li\u003e \t\u003cli\u003eIdeal for Autocross \u0026amp; club racing events\u003c\/li\u003e \t\u003cli\u003eAll Hawk Performance compounds are not compatible with carbon ceramic rotors. Hawk pads are designed to work with Iron\/Metal rotors.\u003c\/li\u003e \t\u003cli\u003eLow torque\u003c\/li\u003e \t\u003cli\u003e38 Deg C-425 Deg C operating temperatures\u003c\/li\u003e \t\u003cli\u003e149 Deg C-315 Deg C optimal temperature range\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eTo ensure correct compatibility we always recommend comparing your existing brake pads to the pad shape diagram provided above. Vehicle fitment provided is to be used as a guide only and may not suit your vehicle.\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003e1994-1997 Mazda MX-5 NA\u003c\/li\u003e \t\u003cli\u003e1998-2004 Mazda MX-5 NB\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImportant - Installation and Brake Bedding Procedure:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003e\u003cu\u003eSTREET\u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eStreet Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eTo break in the new components, make 6 to 10 stops from approximately 30 to 35 MPH\u003c\/li\u003e \t\u003cli\u003eapplying moderate pressure.\u003c\/li\u003e \t\u003cli\u003eMake an additional 2 to 3 hard stops from approximately 40 to 45 MPH.\u003c\/li\u003e \t\u003cli\u003eDO NOT DRAG BRAKES!\u003c\/li\u003e \t\u003cli\u003eAllow 15 minutes for brake system to cool down.\u003c\/li\u003e \t\u003cli\u003eYour brakes are now ready for use and can be driven normally.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cu\u003eMOTORSPORTS \u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad\u003cbr role=\"presentation\"\u003e installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure :\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eMotorsports Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e \t\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e \t\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e \t\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e \t\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003cbr role=\"presentation\"\u003e \u003cu\u003eIMPORTANT REMINDERS WHEN BURNISHING\/BEDDING BRAKE PADS:\u003c\/u\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e \t\u003cli\u003eDo not drag brakes while car is moving during break?in procedure.\u003c\/li\u003e \t\u003cli\u003eDo not engage pedal while car is stopped at any time following the break?in procedure.\u003c\/li\u003e \t\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e \t\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e \t\u003cli\u003eClean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads.\u003c\/li\u003e \t\u003cli\u003eSome forms of racing don’t allow time for the proper break?in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible\u003c\/li\u003e \u003c\/ul\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/hawk-performance-hp-rear-brake-pads-mazda-mx-5-na~233458\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e","brand":"Hawk Performance","offers":[{"title":"Default Title","offer_id":49433038487855,"sku":"HB159N.492","price":229.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/3903\/9279\/files\/HB159N.492.jpg?v=1714107635"},{"product_id":"hawk-performance-hps-5-0-front-brake-pads-wrx-01-07-s14-s15-r32-r33-r34-hb178b-564","title":"Hawk Performance HPS 5.0 Front Brake Pads","description":"\u003cp\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Hawk-Performance-HPS-5.0-Front-Brake-Pads-WRX-01-07\/S14\/S15\/R32\/R33\/R34-HB178B.564\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003c\/p\u003e  \u003cp\u003eFor years, engine builders have been pushing motors to the limits of their ability, and at Hawk Performance, we're closer than ever to pushing the ABS Rev Limiter to its limits. High Performance Street 5.0 pads give your vehicle the greatest stopping power and pedal feel without compromising ABS. HPS 5.0 is a Ferro-Carbon compound that provides advanced braking characteristics to enhance the driving experience. This compound combines the safety and quality of aerospace design with the braking technology of motorsports. The results are shorter stopping distances, improved performance under heavy braking conditions, and street car friendly characteristics.\u003c\/p\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003e\u003cstrong\u003eSTREET USE ONLY\u003c\/strong\u003e\u003c\/li\u003e \t\u003cli\u003eAggressive torque\u003c\/li\u003e \t\u003cli\u003eGreat rotor \u0026amp; pad wear life\u003c\/li\u003e \t\u003cli\u003eSmooth \u0026amp; predictable control\u003c\/li\u003e \t\u003cli\u003eDesigned to deliver high deceleration rates\u003c\/li\u003e \t\u003cli\u003eConsistent brake release characteristics for a smooth braking feel\u003c\/li\u003e \t\u003cli\u003eAll Hawk Performance compounds are not compatible with carbon ceramic rotors. Hawk pads are designed to work with Iron\/Metal rotors.\u003c\/li\u003e \t\u003cli\u003e38 ¡C-400 ¡C operating temperatures\u003c\/li\u003e \t\u003cli\u003e38 ¡C-290 ¡C optimal temperature range\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eTo ensure correct compatibility we always recommend comparing your existing brake pads to the pad shape diagram provided above. Vehicle fitment provided is to be used as a guide only and may not suit your vehicle.\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003e2001-2007 Subaru WRX GD\/GG (4 Pot Sumitomo Caliper)\u003c\/li\u003e \t\u003cli\u003eNissan Skyline R32 GTS-T (4 Pot Sumitomo Caliper)\u003c\/li\u003e \t\u003cli\u003eNissan Skyline R32 GTS-4 (4 Pot Sumitomo Caliper)\u003c\/li\u003e \t\u003cli\u003eNissan Skyline R32 GTR (4 Pot Sumitomo Caliper)\u003c\/li\u003e \t\u003cli\u003eNissan Skyline R33 GTS-T (4 Pot Sumitomo Caliper)\u003c\/li\u003e \t\u003cli\u003eNissan Skyline R34 GT-T (4 Pot Sumitomo Caliper)\u003c\/li\u003e \t\u003cli\u003eNissan 200SX S14 (4 Pot Sumitomo Caliper)\u003c\/li\u003e \t\u003cli\u003eNissan 200SX S15 (4 Pot Sumitomo Caliper)\u003c\/li\u003e \t\u003cli\u003eNissan 300ZX Z32 (4 Pot Sumitomo Caliper)\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eImportant - Installation and Brake Bedding Procedure:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003e\u003cu\u003eSTREET\u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eStreet Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eTo break in the new components, make 6 to 10 stops from approximately 30 to 35 MPH\u003c\/li\u003e \t\u003cli\u003eapplying moderate pressure.\u003c\/li\u003e \t\u003cli\u003eMake an additional 2 to 3 hard stops from approximately 40 to 45 MPH.\u003c\/li\u003e \t\u003cli\u003eDO NOT DRAG BRAKES!\u003c\/li\u003e \t\u003cli\u003eAllow 15 minutes for brake system to cool down.\u003c\/li\u003e \t\u003cli\u003eYour brakes are now ready for use and can be driven normally.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cu\u003eMOTORSPORTS \u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad\u003cbr role=\"presentation\"\u003e installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure :\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eMotorsports Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e \t\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e \t\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e \t\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e \t\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003cbr role=\"presentation\"\u003e \u003cu\u003eIMPORTANT REMINDERS WHEN BURNISHING\/BEDDING BRAKE PADS:\u003c\/u\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e \t\u003cli\u003eDo not drag brakes while car is moving during break?in procedure.\u003c\/li\u003e \t\u003cli\u003eDo not engage pedal while car is stopped at any time following the break?in procedure.\u003c\/li\u003e \t\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e \t\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e \t\u003cli\u003eClean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads.\u003c\/li\u003e \t\u003cli\u003eSome forms of racing don’t allow time for the proper break?in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Hawk-Performance-HPS-5.0-Front-Brake-Pads-WRX-01-07\/S14\/S15\/R32\/R33\/R34-HB178B.564\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003c\/p\u003e","brand":"Hawk Performance","offers":[{"title":"Default Title","offer_id":49433038684463,"sku":"HB178B.564","price":269.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/3903\/9279\/files\/HB178B.564.jpg?v=1714107634"},{"product_id":"hawk-performance-er-1-front-brake-pads-subaru-wrx-01-07-nissan-s14-s15-r32-r33-r34-hb178d-564","title":"Hawk Performance ER-1 Front Brake Pads","description":"\u003cp\u003e\u003ca style=\"text-decoration: none;\" href=\"https:\/\/www.prospeedracing.com.au\/Hawk-Performance-ER-1-Front-Brake-Pads-Subaru-WRX-01-07\/Nissan-S14\/S15\/R32\/R33\/R34-HB178D.564\"\u003e \u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eER-1 has been developed by Hawk Performance for the endurance racing market with a simple goal; offer a higher coefficient of friction than competing endurance pads while maintaining matched or improved lifespan. Years of testing across America’s most prestigious races has resulted in a well-rounded compound that offers ideal modulation and pedal communication, with ground breaking friction stability across a thermal range as high as 1,600 °F. This consistency of performance, hour after hour, makes it ideal for not only endurance racing, but HPDE, track days, time trials and even sprint racing.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSuperior Pad \u0026amp; Rotor wear\u003c\/li\u003e\n\u003cli\u003eConsistent medium-to-high friction\u003c\/li\u003e\n\u003cli\u003eSpecific emphasis on modulation, release and pedal communication\u003c\/li\u003e\n\u003cli\u003eIdeal for light-to-medium weight vehicles in HPDE, Track Day events, Time Trials, or Endurance Racing\u003c\/li\u003e\n\u003cli\u003eHigher coefficient of friction than competing endurance pads, wtih matched or improved lifespan\u003c\/li\u003e\n\u003cli\u003eAll Hawk Performance compounds are not compatible with carbon ceramic rotors. Hawk pads are designed to work with Iron\/Metal rotors\u003c\/li\u003e\n\u003cli\u003eMedium to High torque\u003c\/li\u003e\n\u003cli\u003e204-870 C operating temperatures\u003c\/li\u003e\n\u003cli\u003e370-593 C optimal temperatures\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTo ensure correct compatibility we always recommend comparing your existing brake pads to the pad shape diagram provided above. Vehicle fitment provided is to be used as a guide only and may not suit your vehicle.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2001-2007 Subaru WRX GD\/GG (4 Pot Sumitomo Caliper)\u003c\/li\u003e\n\u003cli\u003eNissan Skyline R32 GTS-T (4 Pot Sumitomo Caliper)\u003c\/li\u003e\n\u003cli\u003eNissan Skyline R32 GTS-4 (4 Pot Sumitomo Caliper)\u003c\/li\u003e\n\u003cli\u003eNissan Skyline R32 GTR (4 Pot Sumitomo Caliper)\u003c\/li\u003e\n\u003cli\u003eNissan Skyline R33 GTS-T (4 Pot Sumitomo Caliper)\u003c\/li\u003e\n\u003cli\u003eNissan Skyline R34 GT-T (4 Pot Sumitomo Caliper)\u003c\/li\u003e\n\u003cli\u003eNissan 200SX S14 (4 Pot Sumitomo Caliper)\u003c\/li\u003e\n\u003cli\u003eNissan 200SX S15 (4 Pot Sumitomo Caliper)\u003c\/li\u003e\n\u003cli\u003eNissan 300ZX Z32 (4 Pot Sumitomo Caliper)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant - Installation and Brake Bedding Procedure:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cu\u003eSTREET\u003c\/u\u003e\u003c\/p\u003e\n\u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e\n\u003cp\u003eBrake Pad Installation Procedure:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e\n\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e\n\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e\n\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e\n\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e\n\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eStreet Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTo break in the new components, make 6 to 10 stops from approximately 30 to 35 MPH\u003c\/li\u003e\n\u003cli\u003eapplying moderate pressure.\u003c\/li\u003e\n\u003cli\u003eMake an additional 2 to 3 hard stops from approximately 40 to 45 MPH.\u003c\/li\u003e\n\u003cli\u003eDO NOT DRAG BRAKES!\u003c\/li\u003e\n\u003cli\u003eAllow 15 minutes for brake system to cool down.\u003c\/li\u003e\n\u003cli\u003eYour brakes are now ready for use and can be driven normally.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cu\u003eMOTORSPORTS \u003c\/u\u003e\u003c\/p\u003e\n\u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad\u003cbr role=\"presentation\"\u003einstallation instructions provided by the vehicle manufacturer.\u003c\/p\u003e\n\u003cp\u003eBrake Pad Installation Procedure :\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e\n\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e\n\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e\n\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e\n\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e\n\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMotorsports Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e\n\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e\n\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e\n\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e\n\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr role=\"presentation\"\u003e\u003cu\u003eIMPORTANT REMINDERS WHEN BURNISHING\/BEDDING BRAKE PADS:\u003c\/u\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e\n\u003cli\u003eDo not drag brakes while car is moving during break?in procedure.\u003c\/li\u003e\n\u003cli\u003eDo not engage pedal while car is stopped at any time following the break?in procedure.\u003c\/li\u003e\n\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e\n\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e\n\u003cli\u003eClean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads.\u003c\/li\u003e\n\u003cli\u003eSome forms of racing don’t allow time for the proper break?in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca style=\"text-decoration: none;\" href=\"https:\/\/www.prospeedracing.com.au\/Hawk-Performance-ER-1-Front-Brake-Pads-Subaru-WRX-01-07\/Nissan-S14\/S15\/R32\/R33\/R34-HB178D.564\"\u003e \u003c\/a\u003e\u003c\/p\u003e","brand":"Hawk Performance","offers":[{"title":"Default Title","offer_id":49433038717231,"sku":"HB178D.564","price":619.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/3903\/9279\/files\/HB178D.564.jpg?v=1739249217"},{"product_id":"hawk-performance-hp-front-brake-pads-subaru-wrx-01","title":"Hawk Performance HP+ Front Brake Pads","description":"\u003cp\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/hawk-performance-hp-front-brake-pads-subaru-wrx-01\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003c\/p\u003e  \u003cp\u003eHP Plus utilizes a unique Ferro-Carbon, high-tech friction material that was developed and manufactured for sport driving in autocross, Solo II and Ã’track dayÓ applications. The Ferro-Carbon formulation offers lower wear rates and higher torque values than other competitive materials.\u003c\/p\u003e  \u003cp\u003eExtremely high coefficient of friction makes HP Plus the perfect upgrade over stock for high performance streetcars used in autocross competition or that experience repetitive, heavy braking.\u003c\/p\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eLow to mid temperature range\u003c\/li\u003e \t\u003cli\u003eFade resistant\u003c\/li\u003e \t\u003cli\u003eSmooth \u0026amp; predictable torque\u003c\/li\u003e \t\u003cli\u003eIdeal for Autocross \u0026amp; club racing events\u003c\/li\u003e \t\u003cli\u003eAll Hawk Performance compounds are not compatible with carbon ceramic rotors. Hawk pads are designed to work with Iron\/Metal rotors.\u003c\/li\u003e \t\u003cli\u003eLow torque\u003c\/li\u003e \t\u003cli\u003e38 Deg C-425 Deg C operating temperatures\u003c\/li\u003e \t\u003cli\u003e149 Deg C-315 Deg C optimal temperature range\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eTo ensure correct compatibility we always recommend comparing your existing brake pads to the pad shape diagram provided above. Vehicle fitment provided is to be used as a guide only and may not suit your vehicle.\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003e2001-2007 Subaru WRX GD\/GG (4 Pot Sumitomo Caliper)\u003c\/li\u003e \t\u003cli\u003eNissan Skyline R32 GTS-T (4 Pot Sumitomo Caliper)\u003c\/li\u003e \t\u003cli\u003eNissan Skyline R32 GTS-4 (4 Pot Sumitomo Caliper)\u003c\/li\u003e \t\u003cli\u003eNissan Skyline R32 GTR (4 Pot Sumitomo Caliper)\u003c\/li\u003e \t\u003cli\u003eNissan Skyline R33 GTS-T (4 Pot Sumitomo Caliper)\u003c\/li\u003e \t\u003cli\u003eNissan Skyline R34 GT-T (4 Pot Sumitomo Caliper)\u003c\/li\u003e \t\u003cli\u003eNissan 200SX S14 (4 Pot Sumitomo Caliper)\u003c\/li\u003e \t\u003cli\u003eNissan 200SX S15 (4 Pot Sumitomo Caliper)\u003c\/li\u003e \t\u003cli\u003eNissan 300ZX Z32 (4 Pot Sumitomo Caliper)\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eImportant - Installation and Brake Bedding Procedure:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003e\u003cu\u003eSTREET\u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eStreet Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eTo break in the new components, make 6 to 10 stops from approximately 30 to 35 MPH\u003c\/li\u003e \t\u003cli\u003eapplying moderate pressure.\u003c\/li\u003e \t\u003cli\u003eMake an additional 2 to 3 hard stops from approximately 40 to 45 MPH.\u003c\/li\u003e \t\u003cli\u003eDO NOT DRAG BRAKES!\u003c\/li\u003e \t\u003cli\u003eAllow 15 minutes for brake system to cool down.\u003c\/li\u003e \t\u003cli\u003eYour brakes are now ready for use and can be driven normally.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cu\u003eMOTORSPORTS \u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad\u003cbr role=\"presentation\"\u003e installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure :\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eMotorsports Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e \t\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e \t\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e \t\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e \t\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003cbr role=\"presentation\"\u003e \u003cu\u003eIMPORTANT REMINDERS WHEN BURNISHING\/BEDDING BRAKE PADS:\u003c\/u\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e \t\u003cli\u003eDo not drag brakes while car is moving during break?in procedure.\u003c\/li\u003e \t\u003cli\u003eDo not engage pedal while car is stopped at any time following the break?in procedure.\u003c\/li\u003e \t\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e \t\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e \t\u003cli\u003eClean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads.\u003c\/li\u003e \t\u003cli\u003eSome forms of racing don’t allow time for the proper break?in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/hawk-performance-hp-front-brake-pads-subaru-wrx-01\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003c\/p\u003e","brand":"Hawk Performance","offers":[{"title":"Default Title","offer_id":49433038815535,"sku":"HB178N.564","price":309.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/3903\/9279\/files\/HB178N.564.jpg?v=1714107635"},{"product_id":"hawk-performance-hps-5-0-rear-brake-pads-wrx-01-07-nissan-r32-r33-r34-hb179b-630","title":"Hawk Performance HPS 5.0 Rear Brake Pads","description":"\u003cp\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Hawk-Performance-HPS-5.0-Rear-Brake-Pads-WRX-01-07\/Nissan-R32\/R33\/R34-HB179B.630\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003c\/p\u003e  \u003cp\u003eFor years, engine builders have been pushing motors to the limits of their ability, and at Hawk Performance, we're closer than ever to pushing the ABS Rev Limiter to its limits. High Performance Street 5.0 pads give your vehicle the greatest stopping power and pedal feel without compromising ABS. HPS 5.0 is a Ferro-Carbon compound that provides advanced braking characteristics to enhance the driving experience. This compound combines the safety and quality of aerospace design with the braking technology of motorsports. The results are shorter stopping distances, improved performance under heavy braking conditions, and street car friendly characteristics.\u003c\/p\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003e\u003cstrong\u003eSTREET USE ONLY\u003c\/strong\u003e\u003c\/li\u003e \t\u003cli\u003eAggressive torque\u003c\/li\u003e \t\u003cli\u003eGreat rotor \u0026amp; pad wear life\u003c\/li\u003e \t\u003cli\u003eSmooth \u0026amp; predictable control\u003c\/li\u003e \t\u003cli\u003eDesigned to deliver high deceleration rates\u003c\/li\u003e \t\u003cli\u003eConsistent brake release characteristics for a smooth braking feel\u003c\/li\u003e \t\u003cli\u003eAll Hawk Performance compounds are not compatible with carbon ceramic rotors. Hawk pads are designed to work with Iron\/Metal rotors.\u003c\/li\u003e \t\u003cli\u003e38 ¡C-400 ¡C operating temperatures\u003c\/li\u003e \t\u003cli\u003e38 ¡C-290 ¡C optimal temperature range\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eTo ensure correct compatibility we always recommend comparing your existing brake pads to the pad shape diagram provided above. Vehicle fitment provided is to be used as a guide only and may not suit your vehicle.\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003e2001-2007 Subaru WRX GD\/GG (4 Pot Sumitomo Caliper)\u003c\/li\u003e \t\u003cli\u003eNissan Skyline R32 GTS-T (4 Pot Sumitomo Caliper)\u003c\/li\u003e \t\u003cli\u003eNissan Skyline R32 GTS-4 (4 Pot Sumitomo Caliper)\u003c\/li\u003e \t\u003cli\u003eNissan Skyline R32 GTR (4 Pot Sumitomo Caliper)\u003c\/li\u003e \t\u003cli\u003eNissan Skyline R33 GTS-T (4 Pot Sumitomo Caliper)\u003c\/li\u003e \t\u003cli\u003eNissan Skyline R34 GT-T (4 Pot Sumitomo Caliper)\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eImportant - Installation and Brake Bedding Procedure:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003e\u003cu\u003eSTREET\u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eStreet Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eTo break in the new components, make 6 to 10 stops from approximately 30 to 35 MPH\u003c\/li\u003e \t\u003cli\u003eapplying moderate pressure.\u003c\/li\u003e \t\u003cli\u003eMake an additional 2 to 3 hard stops from approximately 40 to 45 MPH.\u003c\/li\u003e \t\u003cli\u003eDO NOT DRAG BRAKES!\u003c\/li\u003e \t\u003cli\u003eAllow 15 minutes for brake system to cool down.\u003c\/li\u003e \t\u003cli\u003eYour brakes are now ready for use and can be driven normally.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cu\u003eMOTORSPORTS \u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad\u003cbr role=\"presentation\"\u003e installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure :\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eMotorsports Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e \t\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e \t\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e \t\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e \t\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003cbr role=\"presentation\"\u003e \u003cu\u003eIMPORTANT REMINDERS WHEN BURNISHING\/BEDDING BRAKE PADS:\u003c\/u\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e \t\u003cli\u003eDo not drag brakes while car is moving during break?in procedure.\u003c\/li\u003e \t\u003cli\u003eDo not engage pedal while car is stopped at any time following the break?in procedure.\u003c\/li\u003e \t\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e \t\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e \t\u003cli\u003eClean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads.\u003c\/li\u003e \t\u003cli\u003eSome forms of racing don’t allow time for the proper break?in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Hawk-Performance-HPS-5.0-Rear-Brake-Pads-WRX-01-07\/Nissan-R32\/R33\/R34-HB179B.630\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003c\/p\u003e","brand":"Hawk Performance","offers":[{"title":"Default Title","offer_id":49433038848303,"sku":"HB179B.630","price":179.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/3903\/9279\/files\/HB179B.630.jpg?v=1714107636"},{"product_id":"hawk-performance-ceramic-front-brake-pads-wrx-01-07-s14-s15-r32-r33-r34-hb178z-564","title":"Hawk Performance Ceramic Front Brake Pads","description":"\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Hawk%20Performance%20Ceramic%20Front%20Brake%20Pads%20-%20WRX%2001-07\/S14\/S15\/R32\/R33\/R34%20HB178Z.564\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003cp\u003eHawk understands the needs of today's ceramic brake pad users and has specifically formulated our composite material to meet - and beat - the stringent low noise, ultra-low dust performance standards they have set. Engineered to reduce brake NVH (Noise, Vibration and Harshness), Performance Ceramic is a premium disc brake pad that delivers excellent performance mile after mile. Providing a linear friction profile that allows your vehicle's ABS system to operate most effectively, our unique compound has the advantage of never sacrificing power to achieve traditional ceramic pad attributes. With Hawk's PC, you can expect reduced brake pad wear, longer rotor life, and our quietest ride ever.\u003c\/p\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003e\u003cstrong\u003eSTREET USE ONLY\u003c\/strong\u003e\u003c\/li\u003e \t\u003cli\u003eExtremely quiet\u003c\/li\u003e \t\u003cli\u003eUltra-low dust\u003c\/li\u003e \t\u003cli\u003eImproved stopping power\u003c\/li\u003e \t\u003cli\u003eGentle on rotors for extended pad life\u003c\/li\u003e \t\u003cli\u003eStable friction output\u003c\/li\u003e \t\u003cli\u003eAll Hawk Performance compounds are not compatible with carbon ceramic rotors. Hawk pads are designed to work with Iron\/Metal rotors.\u003c\/li\u003e \t\u003cli\u003e38 ¡C-343 ¡C operating temperature range\u003c\/li\u003e \t\u003cli\u003e38 ¡C-232 ¡C optimal temperature range\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eTo ensure correct compatibility we always recommend comparing your existing brake pads to the pad shape diagram provided above. Vehicle fitment provided is to be used as a guide only and may not suit your vehicle.\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003e2001-2007 Subaru WRX GD\/GG (4 Pot Sumitomo Caliper)\u003c\/li\u003e \t\u003cli\u003eNissan Skyline R32 GTS-T (4 Pot Sumitomo Caliper)\u003c\/li\u003e \t\u003cli\u003eNissan Skyline R32 GTS-4 (4 Pot Sumitomo Caliper)\u003c\/li\u003e \t\u003cli\u003eNissan Skyline R32 GTR (4 Pot Sumitomo Caliper)\u003c\/li\u003e \t\u003cli\u003eNissan Skyline R33 GTS-T (4 Pot Sumitomo Caliper)\u003c\/li\u003e \t\u003cli\u003eNissan Skyline R34 GT-T (4 Pot Sumitomo Caliper)\u003c\/li\u003e \t\u003cli\u003eNissan 200SX S14 (4 Pot Sumitomo Caliper)\u003c\/li\u003e \t\u003cli\u003eNissan 200SX S15 (4 Pot Sumitomo Caliper)\u003c\/li\u003e \t\u003cli\u003eNissan 300ZX Z32 (4 Pot Sumitomo Caliper)\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImportant - Installation and Brake Bedding Procedure:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003e\u003cu\u003eSTREET\u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eStreet Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eTo break in the new components, make 6 to 10 stops from approximately 30 to 35 MPH\u003c\/li\u003e \t\u003cli\u003eapplying moderate pressure.\u003c\/li\u003e \t\u003cli\u003eMake an additional 2 to 3 hard stops from approximately 40 to 45 MPH.\u003c\/li\u003e \t\u003cli\u003eDO NOT DRAG BRAKES!\u003c\/li\u003e \t\u003cli\u003eAllow 15 minutes for brake system to cool down.\u003c\/li\u003e \t\u003cli\u003eYour brakes are now ready for use and can be driven normally.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cu\u003eMOTORSPORTS \u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad\u003cbr role=\"presentation\"\u003e installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure :\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eMotorsports Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e \t\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e \t\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e \t\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e \t\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003cbr role=\"presentation\"\u003e \u003cu\u003eIMPORTANT REMINDERS WHEN BURNISHING\/BEDDING BRAKE PADS:\u003c\/u\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e \t\u003cli\u003eDo not drag brakes while car is moving during break?in procedure.\u003c\/li\u003e \t\u003cli\u003eDo not engage pedal while car is stopped at any time following the break?in procedure.\u003c\/li\u003e \t\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e \t\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e \t\u003cli\u003eClean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads.\u003c\/li\u003e \t\u003cli\u003eSome forms of racing don’t allow time for the proper break?in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible\u003c\/li\u003e \u003c\/ul\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Hawk%20Performance%20Ceramic%20Front%20Brake%20Pads%20-%20WRX%2001-07\/S14\/S15\/R32\/R33\/R34%20HB178Z.564\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e","brand":"Hawk Performance","offers":[{"title":"Default Title","offer_id":49433038979375,"sku":"HB178Z.564","price":299.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/3903\/9279\/files\/HB178Z.564.jpg?v=1714107635"},{"product_id":"hawk-performance-dtc-30-front-brake-pads-wrx-01-07-s14-s15-r32-r33-r34-hb178w-564","title":"Hawk Performance DTC-30 Front Brake Pads","description":"\u003cp\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Hawk%20Performance%20DTC-30%20Front%20Brake%20Pads%20-%20WRX%2001-07\/S14\/S15\/R32\/R33\/R34%20HB178W.564\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003c\/p\u003e  \u003cp\u003eDTC-30 is a controllable torque, multi-purpose compound, proven effective in a range of series. It delivers superior release characteristics and smooth pedal feel and initial bite for dirt and circle tracks, NASCAR modified, drag racing, trophy trucks, pro buggies, and more.\u003c\/p\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eConsistent, smooth braking\u003c\/li\u003e \t\u003cli\u003eGood cold effectiveness\u003c\/li\u003e \t\u003cli\u003eAll Hawk Performance compounds are not compatible with carbon ceramic rotors. Hawk pads are designed to work with Iron\/Metal rotors.\u003c\/li\u003e \t\u003cli\u003eMedium torque\u003c\/li\u003e \t\u003cli\u003e38 ¡C-649 ¡C operating temperature range\u003c\/li\u003e \t\u003cli\u003e38 ¡C-426 ¡C optimal temperature range\u003c\/li\u003e \t\u003cli\u003eAll Hawk Performance compounds are not compatible with carbon ceramic rotors. Hawk pads are designed to work with Iron\/Metal rotors. \u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eTo ensure correct compatibility we always recommend comparing your existing brake pads to the pad shape diagram provided above. Vehicle fitment provided is to be used as a guide only and may not suit your vehicle.\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003e2001-2007 Subaru WRX GD\/GG (4 Pot Sumitomo Caliper)\u003c\/li\u003e \t\u003cli\u003eNissan Skyline R32 GTS-T (4 Pot Sumitomo Caliper)\u003c\/li\u003e \t\u003cli\u003eNissan Skyline R32 GTS-4 (4 Pot Sumitomo Caliper)\u003c\/li\u003e \t\u003cli\u003eNissan Skyline R32 GTR (4 Pot Sumitomo Caliper)\u003c\/li\u003e \t\u003cli\u003eNissan Skyline R33 GTS-T (4 Pot Sumitomo Caliper)\u003c\/li\u003e \t\u003cli\u003eNissan Skyline R34 GT-T (4 Pot Sumitomo Caliper)\u003c\/li\u003e \t\u003cli\u003eNissan 200SX S14 (4 Pot Sumitomo Caliper)\u003c\/li\u003e \t\u003cli\u003eNissan 200SX S15 (4 Pot Sumitomo Caliper)\u003c\/li\u003e \t\u003cli\u003eNissan 300ZX Z32 (4 Pot Sumitomo Caliper)\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eImportant - Installation and Brake Bedding Procedure:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003e\u003cu\u003eSTREET\u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eStreet Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eTo break in the new components, make 6 to 10 stops from approximately 30 to 35 MPH\u003c\/li\u003e \t\u003cli\u003eapplying moderate pressure.\u003c\/li\u003e \t\u003cli\u003eMake an additional 2 to 3 hard stops from approximately 40 to 45 MPH.\u003c\/li\u003e \t\u003cli\u003eDO NOT DRAG BRAKES!\u003c\/li\u003e \t\u003cli\u003eAllow 15 minutes for brake system to cool down.\u003c\/li\u003e \t\u003cli\u003eYour brakes are now ready for use and can be driven normally.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cu\u003eMOTORSPORTS \u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad\u003cbr role=\"presentation\"\u003e installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure :\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eMotorsports Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e \t\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e \t\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e \t\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e \t\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003cbr role=\"presentation\"\u003e \u003cu\u003eIMPORTANT REMINDERS WHEN BURNISHING\/BEDDING BRAKE PADS:\u003c\/u\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e \t\u003cli\u003eDo not drag brakes while car is moving during break?in procedure.\u003c\/li\u003e \t\u003cli\u003eDo not engage pedal while car is stopped at any time following the break?in procedure.\u003c\/li\u003e \t\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e \t\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e \t\u003cli\u003eClean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads.\u003c\/li\u003e \t\u003cli\u003eSome forms of racing don’t allow time for the proper break?in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Hawk%20Performance%20DTC-30%20Front%20Brake%20Pads%20-%20WRX%2001-07\/S14\/S15\/R32\/R33\/R34%20HB178W.564\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003c\/p\u003e","brand":"Hawk Performance","offers":[{"title":"Default Title","offer_id":49433038946607,"sku":"HB178W.564","price":339.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/3903\/9279\/files\/HB178W.564.jpg?v=1714107635"},{"product_id":"hawk-performance-hp-rear-brake-pads-subaru-wrx-01","title":"Hawk Performance HP+ Rear Brake Pads","description":"\u003cp\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/hawk-performance-hp-rear-brake-pads-subaru-wrx-01\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003c\/p\u003e  \u003cp\u003eHP Plus utilizes a unique Ferro-Carbon, high-tech friction material that was developed and manufactured for sport driving in autocross, Solo II and Ã’track dayÓ applications. The Ferro-Carbon formulation offers lower wear rates and higher torque values than other competitive materials.\u003c\/p\u003e  \u003cp\u003eExtremely high coefficient of friction makes HP Plus the perfect upgrade over stock for high performance streetcars used in autocross competition or that experience repetitive, heavy braking.\u003c\/p\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eLow to mid temperature range\u003c\/li\u003e \t\u003cli\u003eFade resistant\u003c\/li\u003e \t\u003cli\u003eSmooth \u0026amp; predictable torque\u003c\/li\u003e \t\u003cli\u003eIdeal for Autocross \u0026amp; club racing events\u003c\/li\u003e \t\u003cli\u003eAll Hawk Performance compounds are not compatible with carbon ceramic rotors. Hawk pads are designed to work with Iron\/Metal rotors.\u003c\/li\u003e \t\u003cli\u003eLow torque\u003c\/li\u003e \t\u003cli\u003e38 Deg C-425 Deg C operating temperatures\u003c\/li\u003e \t\u003cli\u003e149 Deg C-315 Deg C optimal temperature range\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eTo ensure correct compatibility we always recommend comparing your existing brake pads to the pad shape diagram provided above. Vehicle fitment provided is to be used as a guide only and may not suit your vehicle.\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003e2001-2007 Subaru WRX GD\/GG (4 Pot Sumitomo Caliper)\u003c\/li\u003e \t\u003cli\u003eNissan Skyline R32 GTS-T (4 Pot Sumitomo Caliper)\u003c\/li\u003e \t\u003cli\u003eNissan Skyline R32 GTS-4 (4 Pot Sumitomo Caliper)\u003c\/li\u003e \t\u003cli\u003eNissan Skyline R32 GTR (4 Pot Sumitomo Caliper)\u003c\/li\u003e \t\u003cli\u003eNissan Skyline R33 GTS-T (4 Pot Sumitomo Caliper)\u003c\/li\u003e \t\u003cli\u003eNissan Skyline R34 GT-T (4 Pot Sumitomo Caliper)\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eImportant - Installation and Brake Bedding Procedure:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003e\u003cu\u003eSTREET\u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eStreet Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eTo break in the new components, make 6 to 10 stops from approximately 30 to 35 MPH\u003c\/li\u003e \t\u003cli\u003eapplying moderate pressure.\u003c\/li\u003e \t\u003cli\u003eMake an additional 2 to 3 hard stops from approximately 40 to 45 MPH.\u003c\/li\u003e \t\u003cli\u003eDO NOT DRAG BRAKES!\u003c\/li\u003e \t\u003cli\u003eAllow 15 minutes for brake system to cool down.\u003c\/li\u003e \t\u003cli\u003eYour brakes are now ready for use and can be driven normally.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cu\u003eMOTORSPORTS \u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad\u003cbr role=\"presentation\"\u003e installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure :\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eMotorsports Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e \t\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e \t\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e \t\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e \t\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003cbr role=\"presentation\"\u003e \u003cu\u003eIMPORTANT REMINDERS WHEN BURNISHING\/BEDDING BRAKE PADS:\u003c\/u\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e \t\u003cli\u003eDo not drag brakes while car is moving during break?in procedure.\u003c\/li\u003e \t\u003cli\u003eDo not engage pedal while car is stopped at any time following the break?in procedure.\u003c\/li\u003e \t\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e \t\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e \t\u003cli\u003eClean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads.\u003c\/li\u003e \t\u003cli\u003eSome forms of racing don’t allow time for the proper break?in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/hawk-performance-hp-rear-brake-pads-subaru-wrx-01\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003c\/p\u003e","brand":"Hawk Performance","offers":[{"title":"Default Title","offer_id":49433039012143,"sku":"HB179N.630","price":229.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/3903\/9279\/files\/HB179N.630.jpg?v=1714107636"},{"product_id":"hawk-performance-dtc-30-rear-brake-pads-wrx-01-07-nissan-r32-r33-r34-hb179w-630","title":"Hawk Performance DTC-30 Rear Brake Pads","description":"\u003cp\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Hawk%20Performance%20DTC-30%20Rear%20Brake%20Pads%20-%20WRX%2001-07\/Nissan%20R32\/R33\/R34%20HB179W.630\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003c\/p\u003e  \u003cp\u003eDTC-30 is a controllable torque, multi-purpose compound, proven effective in a range of series. It delivers superior release characteristics and smooth pedal feel and initial bite for dirt and circle tracks, NASCAR modified, drag racing, trophy trucks, pro buggies, and more.\u003c\/p\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eConsistent, smooth braking\u003c\/li\u003e \t\u003cli\u003eGood cold effectiveness\u003c\/li\u003e \t\u003cli\u003eAll Hawk Performance compounds are not compatible with carbon ceramic rotors. Hawk pads are designed to work with Iron\/Metal rotors.\u003c\/li\u003e \t\u003cli\u003eMedium torque\u003c\/li\u003e \t\u003cli\u003e38 ¡C-649 ¡C operating temperature range\u003c\/li\u003e \t\u003cli\u003e38 ¡C-426 ¡C optimal temperature range\u003c\/li\u003e \t\u003cli\u003eAll Hawk Performance compounds are not compatible with carbon ceramic rotors. Hawk pads are designed to work with Iron\/Metal rotors. \u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eTo ensure correct compatibility we always recommend comparing your existing brake pads to the pad shape diagram provided above. Vehicle fitment provided is to be used as a guide only and may not suit your vehicle.\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003e2001-2007 Subaru WRX GD\/GG (4 Pot Sumitomo Caliper)\u003c\/li\u003e \t\u003cli\u003eNissan Skyline R32 GTS-T (4 Pot Sumitomo Caliper)\u003c\/li\u003e \t\u003cli\u003eNissan Skyline R32 GTS-4 (4 Pot Sumitomo Caliper)\u003c\/li\u003e \t\u003cli\u003eNissan Skyline R32 GTR (4 Pot Sumitomo Caliper)\u003c\/li\u003e \t\u003cli\u003eNissan Skyline R33 GTS-T (4 Pot Sumitomo Caliper)\u003c\/li\u003e \t\u003cli\u003eNissan Skyline R34 GT-T (4 Pot Sumitomo Caliper)\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eImportant - Installation and Brake Bedding Procedure:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003e\u003cu\u003eSTREET\u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eStreet Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eTo break in the new components, make 6 to 10 stops from approximately 30 to 35 MPH\u003c\/li\u003e \t\u003cli\u003eapplying moderate pressure.\u003c\/li\u003e \t\u003cli\u003eMake an additional 2 to 3 hard stops from approximately 40 to 45 MPH.\u003c\/li\u003e \t\u003cli\u003eDO NOT DRAG BRAKES!\u003c\/li\u003e \t\u003cli\u003eAllow 15 minutes for brake system to cool down.\u003c\/li\u003e \t\u003cli\u003eYour brakes are now ready for use and can be driven normally.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cu\u003eMOTORSPORTS \u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad\u003cbr role=\"presentation\"\u003e installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure :\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eMotorsports Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e \t\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e \t\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e \t\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e \t\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003cbr role=\"presentation\"\u003e \u003cu\u003eIMPORTANT REMINDERS WHEN BURNISHING\/BEDDING BRAKE PADS:\u003c\/u\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e \t\u003cli\u003eDo not drag brakes while car is moving during break?in procedure.\u003c\/li\u003e \t\u003cli\u003eDo not engage pedal while car is stopped at any time following the break?in procedure.\u003c\/li\u003e \t\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e \t\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e \t\u003cli\u003eClean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads.\u003c\/li\u003e \t\u003cli\u003eSome forms of racing don’t allow time for the proper break?in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Hawk%20Performance%20DTC-30%20Rear%20Brake%20Pads%20-%20WRX%2001-07\/Nissan%20R32\/R33\/R34%20HB179W.630\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003c\/p\u003e","brand":"Hawk Performance","offers":[{"title":"Default Title","offer_id":49433039077679,"sku":"HB179W.630","price":339.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/3903\/9279\/files\/HB179W.630.jpg?v=1714107635"},{"product_id":"hawk-performance-ceramic-rear-brake-pads-wrx-01-07-nissan-r32-r33-r34-hb179z-630","title":"Hawk Performance Ceramic Rear Brake Pads","description":"\u003cp\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Hawk%20Performance%20Ceramic%20Rear%20Brake%20Pads%20-%20WRX%2001-07\/Nissan%20R32\/R33\/R34%20HB179Z.630\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003c\/p\u003e  \u003cp\u003eHawk understands the needs of today's ceramic brake pad users and has specifically formulated our composite material to meet - and beat - the stringent low noise, ultra-low dust performance standards they have set. Engineered to reduce brake NVH (Noise, Vibration and Harshness), Performance Ceramic is a premium disc brake pad that delivers excellent performance mile after mile. Providing a linear friction profile that allows your vehicle's ABS system to operate most effectively, our unique compound has the advantage of never sacrificing power to achieve traditional ceramic pad attributes. With Hawk's PC, you can expect reduced brake pad wear, longer rotor life, and our quietest ride ever.\u003c\/p\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003e\u003cstrong\u003eSTREET USE ONLY\u003c\/strong\u003e\u003c\/li\u003e \t\u003cli\u003eExtremely quiet\u003c\/li\u003e \t\u003cli\u003eUltra-low dust\u003c\/li\u003e \t\u003cli\u003eImproved stopping power\u003c\/li\u003e \t\u003cli\u003eGentle on rotors for extended pad life\u003c\/li\u003e \t\u003cli\u003eStable friction output\u003c\/li\u003e \t\u003cli\u003eAll Hawk Performance compounds are not compatible with carbon ceramic rotors. Hawk pads are designed to work with Iron\/Metal rotors.\u003c\/li\u003e \t\u003cli\u003e38 ¡C-343 ¡C operating temperature range\u003c\/li\u003e \t\u003cli\u003e38 ¡C-232 ¡C optimal temperature range\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eTo ensure correct compatibility we always recommend comparing your existing brake pads to the pad shape diagram provided above. Vehicle fitment provided is to be used as a guide only and may not suit your vehicle.\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003e2001-2007 Subaru WRX GD\/GG (4 Pot Sumitomo Caliper)\u003c\/li\u003e \t\u003cli\u003eNissan Skyline R32 GTS-T (4 Pot Sumitomo Caliper)\u003c\/li\u003e \t\u003cli\u003eNissan Skyline R32 GTS-4 (4 Pot Sumitomo Caliper)\u003c\/li\u003e \t\u003cli\u003eNissan Skyline R32 GTR (4 Pot Sumitomo Caliper)\u003c\/li\u003e \t\u003cli\u003eNissan Skyline R33 GTS-T (4 Pot Sumitomo Caliper)\u003c\/li\u003e \t\u003cli\u003eNissan Skyline R34 GT-T (4 Pot Sumitomo Caliper)\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eImportant - Installation and Brake Bedding Procedure:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003e\u003cu\u003eSTREET\u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eStreet Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eTo break in the new components, make 6 to 10 stops from approximately 30 to 35 MPH\u003c\/li\u003e \t\u003cli\u003eapplying moderate pressure.\u003c\/li\u003e \t\u003cli\u003eMake an additional 2 to 3 hard stops from approximately 40 to 45 MPH.\u003c\/li\u003e \t\u003cli\u003eDO NOT DRAG BRAKES!\u003c\/li\u003e \t\u003cli\u003eAllow 15 minutes for brake system to cool down.\u003c\/li\u003e \t\u003cli\u003eYour brakes are now ready for use and can be driven normally.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cu\u003eMOTORSPORTS \u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad\u003cbr role=\"presentation\"\u003e installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure :\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eMotorsports Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e \t\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e \t\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e \t\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e \t\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003cbr role=\"presentation\"\u003e \u003cu\u003eIMPORTANT REMINDERS WHEN BURNISHING\/BEDDING BRAKE PADS:\u003c\/u\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e \t\u003cli\u003eDo not drag brakes while car is moving during break?in procedure.\u003c\/li\u003e \t\u003cli\u003eDo not engage pedal while car is stopped at any time following the break?in procedure.\u003c\/li\u003e \t\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e \t\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e \t\u003cli\u003eClean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads.\u003c\/li\u003e \t\u003cli\u003eSome forms of racing don’t allow time for the proper break?in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Hawk%20Performance%20Ceramic%20Rear%20Brake%20Pads%20-%20WRX%2001-07\/Nissan%20R32\/R33\/R34%20HB179Z.630\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003c\/p\u003e","brand":"Hawk Performance","offers":[{"title":"Default Title","offer_id":49433039143215,"sku":"HB179Z.630","price":219.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/3903\/9279\/files\/HB179Z.630.jpg?v=1714107635"},{"product_id":"hawk-performance-er-1-rear-brake-pads-sti-evo-gtr-350z-brz-86-hb180b-560","title":"Hawk Performance ER-1 Rear Brake Pads","description":"\u003cp\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Hawk-Performance-ER-1-Rear-Brake-Pads-STI\/Evo\/GTR\/350Z\/BRZ\/86-HB180B.560\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003c\/p\u003e  \u003cp\u003eER-1 has been developed by Hawk Performance for the endurance racing market with a simple goal; offer a higher coefficient of friction than competing endurance pads while maintaining matched or improved lifespan. Years of testing across America’s most prestigious races has resulted in a well-rounded compound that offers ideal modulation and pedal communication, with ground breaking friction stability across a thermal range as high as 1,600 °F. This consistency of performance, hour after hour, makes it ideal for not only endurance racing, but HPDE, track days, time trials and even sprint racing.\u003c\/p\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eSuperior Pad \u0026amp; Rotor wear\u003c\/li\u003e \t\u003cli\u003eConsistent medium-to-high friction\u003c\/li\u003e \t\u003cli\u003eSpecific emphasis on modulation, release and pedal communication\u003c\/li\u003e \t\u003cli\u003eIdeal for light-to-medium weight vehicles in HPDE, Track Day events, Time Trials, or Endurance Racing\u003c\/li\u003e \t\u003cli\u003eHigher coefficient of friction than competing endurance pads, wtih matched or improved lifespan\u003c\/li\u003e \t\u003cli\u003eAll Hawk Performance compounds are not compatible with carbon ceramic rotors. Hawk pads are designed to work with Iron\/Metal rotors\u003c\/li\u003e \t\u003cli\u003eMedium to High torque\u003c\/li\u003e \t\u003cli\u003e204-870 C operating temperatures\u003c\/li\u003e \t\u003cli\u003e370-593 C optimal temperatures\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eTo ensure correct compatibility we always recommend comparing your existing brake pads to the pad shape diagram provided above. Vehicle fitment provided is to be used as a guide only and may not suit your vehicle.\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003e2001-2007 Subaru STI GDB (2 Pot Brembo Caliper)\u003c\/li\u003e \t\u003cli\u003e2008-2014 Subaru STI GRF\/GVF (2 Pot Brembo Caliper)\u003c\/li\u003e \t\u003cli\u003e2015-2017 Subaru STI VAB (2 Pot Brembo Caliper)\u003c\/li\u003e \t\u003cli\u003e2007-2009 Subaru Liberty GT STI (2 Pot Brembo Caliper)\u003c\/li\u003e \t\u003cli\u003eMitsubishi Lancer Evolution 4 (2 Pot Brembo Caliper)\u003c\/li\u003e \t\u003cli\u003eMitsubishi Lancer Evolution 5 (2 Pot Brembo Caliper)\u003c\/li\u003e \t\u003cli\u003eMitsubishi Lancer Evolution 6 (2 Pot Brembo Caliper)\u003c\/li\u003e \t\u003cli\u003eMitsubishi Lancer Evolution 7 (2 Pot Brembo Caliper)\u003c\/li\u003e \t\u003cli\u003eMitsubishi Lancer Evolution 8 (2 Pot Brembo Caliper)\u003c\/li\u003e \t\u003cli\u003eMitsubishi Lancer Evolution 9 (2 Pot Brembo Caliper)\u003c\/li\u003e \t\u003cli\u003eMitsubishi Lancer Evolution X (2 Pot Brembo Caliper)\u003c\/li\u003e \t\u003cli\u003eNissan Skyline R32 GTR (2 Pot Brembo Caliper)\u003c\/li\u003e \t\u003cli\u003eNissan Skyline R33 GTR (2 Pot Brembo Caliper)\u003c\/li\u003e \t\u003cli\u003eNissan Skyline R34 GTR (2 Pot Brembo Caliper)\u003c\/li\u003e \t\u003cli\u003eNissan 350Z Z33 (2 Pot Brembo Caliper)\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eImportant - Installation and Brake Bedding Procedure:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003e\u003cu\u003eSTREET\u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eStreet Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eTo break in the new components, make 6 to 10 stops from approximately 30 to 35 MPH\u003c\/li\u003e \t\u003cli\u003eapplying moderate pressure.\u003c\/li\u003e \t\u003cli\u003eMake an additional 2 to 3 hard stops from approximately 40 to 45 MPH.\u003c\/li\u003e \t\u003cli\u003eDO NOT DRAG BRAKES!\u003c\/li\u003e \t\u003cli\u003eAllow 15 minutes for brake system to cool down.\u003c\/li\u003e \t\u003cli\u003eYour brakes are now ready for use and can be driven normally.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cu\u003eMOTORSPORTS \u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad\u003cbr role=\"presentation\"\u003e installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure :\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eMotorsports Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e \t\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e \t\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e \t\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e \t\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003cbr role=\"presentation\"\u003e \u003cu\u003eIMPORTANT REMINDERS WHEN BURNISHING\/BEDDING BRAKE PADS:\u003c\/u\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e \t\u003cli\u003eDo not drag brakes while car is moving during break?in procedure.\u003c\/li\u003e \t\u003cli\u003eDo not engage pedal while car is stopped at any time following the break?in procedure.\u003c\/li\u003e \t\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e \t\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e \t\u003cli\u003eClean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads.\u003c\/li\u003e \t\u003cli\u003eSome forms of racing don’t allow time for the proper break?in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Hawk-Performance-ER-1-Rear-Brake-Pads-STI\/Evo\/GTR\/350Z\/BRZ\/86-HB180B.560\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003c\/p\u003e","brand":"Hawk Performance","offers":[{"title":"Default Title","offer_id":49433039175983,"sku":"HB180D.560","price":399.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/3903\/9279\/files\/HB180D.560.jpg?v=1714107636"},{"product_id":"hawk-hp-rear-brake-pads-subaru-sti-01-19-mitsubishi-evo-5-9-brembo-nissan-gt-r-350z-hb180n-560","title":"Hawk Performance HP+ Rear Brake Pads","description":"\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Hawk-HP-Rear-Brake-Pads-Subaru-STI-01-19\/Mitsubishi-Evo-5-9-Brembo\/Nissan-GT-R\/350Z-HB180N.560\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003cp\u003eHP Plus utilizes a unique Ferro-Carbon, high-tech friction material that was developed and manufactured for sport driving in autocross, Solo II and Ã’track dayÓ applications. The Ferro-Carbon formulation offers lower wear rates and higher torque values than other competitive materials.\u003c\/p\u003e  \u003cp\u003eExtremely high coefficient of friction makes HP Plus the perfect upgrade over stock for high performance streetcars used in autocross competition or that experience repetitive, heavy braking.\u003c\/p\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eLow to mid temperature range\u003c\/li\u003e \t\u003cli\u003eFade resistant\u003c\/li\u003e \t\u003cli\u003eSmooth \u0026amp; predictable torque\u003c\/li\u003e \t\u003cli\u003eIdeal for Autocross \u0026amp; club racing events\u003c\/li\u003e \t\u003cli\u003eAll Hawk Performance compounds are not compatible with carbon ceramic rotors. Hawk pads are designed to work with Iron\/Metal rotors.\u003c\/li\u003e \t\u003cli\u003eLow torque\u003c\/li\u003e \t\u003cli\u003e38 Deg C-425 Deg C operating temperatures\u003c\/li\u003e \t\u003cli\u003e149 Deg C-315 Deg C optimal temperature range\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eTo ensure correct compatibility we always recommend comparing your existing brake pads to the pad shape diagram provided above. Vehicle fitment provided is to be used as a guide only and may not suit your vehicle.\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003e2001-2007 Subaru STI GDB (2 Pot Brembo Caliper)\u003c\/li\u003e \t\u003cli\u003e2008-2014 Subaru STI GRF\/GVF (2 Pot Brembo Caliper)\u003c\/li\u003e \t\u003cli\u003e2015-2017 Subaru STI VAB (2 Pot Brembo Caliper)\u003c\/li\u003e \t\u003cli\u003e2007-2009 Subaru Liberty GT STI (2 Pot Brembo Caliper)\u003c\/li\u003e \t\u003cli\u003eMitsubishi Lancer Evolution 4 (2 Pot Brembo Caliper)\u003c\/li\u003e \t\u003cli\u003eMitsubishi Lancer Evolution 5 (2 Pot Brembo Caliper)\u003c\/li\u003e \t\u003cli\u003eMitsubishi Lancer Evolution 6 (2 Pot Brembo Caliper)\u003c\/li\u003e \t\u003cli\u003eMitsubishi Lancer Evolution 7 (2 Pot Brembo Caliper)\u003c\/li\u003e \t\u003cli\u003eMitsubishi Lancer Evolution 8 (2 Pot Brembo Caliper)\u003c\/li\u003e \t\u003cli\u003eMitsubishi Lancer Evolution 9 (2 Pot Brembo Caliper)\u003c\/li\u003e \t\u003cli\u003eMitsubishi Lancer Evolution X (2 Pot Brembo Caliper)\u003c\/li\u003e \t\u003cli\u003eNissan Skyline R32 GTR (2 Pot Brembo Caliper)\u003c\/li\u003e \t\u003cli\u003eNissan Skyline R33 GTR (2 Pot Brembo Caliper)\u003c\/li\u003e \t\u003cli\u003eNissan Skyline R34 GTR (2 Pot Brembo Caliper)\u003c\/li\u003e \t\u003cli\u003eNissan 350Z Z33 (2 Pot Brembo Caliper)\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImportant - Installation and Brake Bedding Procedure:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003e\u003cu\u003eSTREET\u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eStreet Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eTo break in the new components, make 6 to 10 stops from approximately 30 to 35 MPH\u003c\/li\u003e \t\u003cli\u003eapplying moderate pressure.\u003c\/li\u003e \t\u003cli\u003eMake an additional 2 to 3 hard stops from approximately 40 to 45 MPH.\u003c\/li\u003e \t\u003cli\u003eDO NOT DRAG BRAKES!\u003c\/li\u003e \t\u003cli\u003eAllow 15 minutes for brake system to cool down.\u003c\/li\u003e \t\u003cli\u003eYour brakes are now ready for use and can be driven normally.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cu\u003eMOTORSPORTS \u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad\u003cbr role=\"presentation\"\u003e installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure :\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eMotorsports Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e \t\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e \t\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e \t\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e \t\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003cbr role=\"presentation\"\u003e \u003cu\u003eIMPORTANT REMINDERS WHEN BURNISHING\/BEDDING BRAKE PADS:\u003c\/u\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e \t\u003cli\u003eDo not drag brakes while car is moving during break?in procedure.\u003c\/li\u003e \t\u003cli\u003eDo not engage pedal while car is stopped at any time following the break?in procedure.\u003c\/li\u003e \t\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e \t\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e \t\u003cli\u003eClean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads.\u003c\/li\u003e \t\u003cli\u003eSome forms of racing don’t allow time for the proper break?in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible\u003c\/li\u003e \u003c\/ul\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Hawk-HP-Rear-Brake-Pads-Subaru-STI-01-19\/Mitsubishi-Evo-5-9-Brembo\/Nissan-GT-R\/350Z-HB180N.560\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e","brand":"Hawk Performance","offers":[{"title":"Default Title","offer_id":49433039274287,"sku":"HB180N.560","price":214.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/3903\/9279\/files\/HB180N.560.jpg?v=1714107636"},{"product_id":"hawk-performance-ceramic-rear-brake-pads-sti-evo-gtr-350z-brz-86-hb180z-560","title":"Hawk Performance Ceramic Rear Brake Pads","description":"\u003cp\u003eHawk understands the needs of today's ceramic brake pad users and has specifically formulated our composite material to meet - and beat - the stringent low noise, ultra-low dust performance standards they have set. Engineered to reduce brake NVH (Noise, Vibration and Harshness), Performance Ceramic is a premium disc brake pad that delivers excellent performance mile after mile. Providing a linear friction profile that allows your vehicle's ABS system to operate most effectively, our unique compound has the advantage of never sacrificing power to achieve traditional ceramic pad attributes. With Hawk's PC, you can expect reduced brake pad wear, longer rotor life, and our quietest ride ever.\u003c\/p\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003e\u003cstrong\u003eSTREET USE ONLY\u003c\/strong\u003e\u003c\/li\u003e \t\u003cli\u003eExtremely quiet\u003c\/li\u003e \t\u003cli\u003eUltra-low dust\u003c\/li\u003e \t\u003cli\u003eImproved stopping power\u003c\/li\u003e \t\u003cli\u003eGentle on rotors for extended pad life\u003c\/li\u003e \t\u003cli\u003eStable friction output\u003c\/li\u003e \t\u003cli\u003eAll Hawk Performance compounds are not compatible with carbon ceramic rotors. Hawk pads are designed to work with Iron\/Metal rotors.\u003c\/li\u003e \t\u003cli\u003e38 ¡C-343 ¡C operating temperature range\u003c\/li\u003e \t\u003cli\u003e38 ¡C-232 ¡C optimal temperature range\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eTo ensure correct compatibility we always recommend comparing your existing brake pads to the pad shape diagram provided above. Vehicle fitment provided is to be used as a guide only and may not suit your vehicle.\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003e2001-2007 Subaru STI GDB (2 Pot Brembo Caliper)\u003c\/li\u003e \t\u003cli\u003e2008-2014 Subaru STI GRF\/GVF (2 Pot Brembo Caliper)\u003c\/li\u003e \t\u003cli\u003e2015-2017 Subaru STI VAB (2 Pot Brembo Caliper)\u003c\/li\u003e \t\u003cli\u003e2007-2009 Subaru Liberty GT STI (2 Pot Brembo Caliper)\u003c\/li\u003e \t\u003cli\u003eMitsubishi Lancer Evolution 4 (2 Pot Brembo Caliper)\u003c\/li\u003e \t\u003cli\u003eMitsubishi Lancer Evolution 5 (2 Pot Brembo Caliper)\u003c\/li\u003e \t\u003cli\u003eMitsubishi Lancer Evolution 6 (2 Pot Brembo Caliper)\u003c\/li\u003e \t\u003cli\u003eMitsubishi Lancer Evolution 7 (2 Pot Brembo Caliper)\u003c\/li\u003e \t\u003cli\u003eMitsubishi Lancer Evolution 8 (2 Pot Brembo Caliper)\u003c\/li\u003e \t\u003cli\u003eMitsubishi Lancer Evolution 9 (2 Pot Brembo Caliper)\u003c\/li\u003e \t\u003cli\u003eMitsubishi Lancer Evolution X (2 Pot Brembo Caliper)\u003c\/li\u003e \t\u003cli\u003eNissan Skyline R32 GTR (2 Pot Brembo Caliper)\u003c\/li\u003e \t\u003cli\u003eNissan Skyline R33 GTR (2 Pot Brembo Caliper)\u003c\/li\u003e \t\u003cli\u003eNissan Skyline R34 GTR (2 Pot Brembo Caliper)\u003c\/li\u003e \t\u003cli\u003eNissan 350Z Z33 (2 Pot Brembo Caliper)\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImportant - Installation and Brake Bedding Procedure:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003e\u003cu\u003eSTREET\u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eStreet Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eTo break in the new components, make 6 to 10 stops from approximately 30 to 35 MPH\u003c\/li\u003e \t\u003cli\u003eapplying moderate pressure.\u003c\/li\u003e \t\u003cli\u003eMake an additional 2 to 3 hard stops from approximately 40 to 45 MPH.\u003c\/li\u003e \t\u003cli\u003eDO NOT DRAG BRAKES!\u003c\/li\u003e \t\u003cli\u003eAllow 15 minutes for brake system to cool down.\u003c\/li\u003e \t\u003cli\u003eYour brakes are now ready for use and can be driven normally.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cu\u003eMOTORSPORTS \u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad\u003cbr role=\"presentation\"\u003e installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure :\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eMotorsports Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e \t\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e \t\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e \t\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e \t\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003cbr role=\"presentation\"\u003e \u003cu\u003eIMPORTANT REMINDERS WHEN BURNISHING\/BEDDING BRAKE PADS:\u003c\/u\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e \t\u003cli\u003eDo not drag brakes while car is moving during break?in procedure.\u003c\/li\u003e \t\u003cli\u003eDo not engage pedal while car is stopped at any time following the break?in procedure.\u003c\/li\u003e \t\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e \t\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e \t\u003cli\u003eClean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads.\u003c\/li\u003e \t\u003cli\u003eSome forms of racing don’t allow time for the proper break?in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible\u003c\/li\u003e \u003c\/ul\u003e","brand":"Hawk Performance","offers":[{"title":"Default Title","offer_id":49433039438127,"sku":"HB180Z.560","price":209.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/3903\/9279\/files\/HB180Z.560.jpg?v=1714107635"},{"product_id":"hawk-performance-dtc-70-front-brake-pads-ap-racing-cp4567-cp5040-cp5100-co6760-16mm-hb192u-620","title":"Hawk Performance DTC-70 Front Brake Pads - AP Racing CP4567\/CP5040\/CP5100\/CO6760 16mm (6-Piston)","description":"\u003cp\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Hawk-Performance-DTC-70-Front-Brake-Pads-AP-Racing-CP4567\/CP5040\/CP5100\/CO6760-16mm-HB192U.620\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003c\/p\u003e  \u003cp\u003eDTC-70 was engineered with extremely high torque and highly aggressive initial bite for cars with high deceleration rates, with or without downforce. With superior release and control characteristics, it's a winning race solution on its own or as split friction with DTC-60.\u003c\/p\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eHigh performance high torque compound\u003c\/li\u003e \t\u003cli\u003eSuperior rotor and pad wear\u003c\/li\u003e \t\u003cli\u003eExcellent modulation and release characteristics\u003c\/li\u003e \t\u003cli\u003eApplicable to NASCAR\/NASCAR modified, ARCA, Super Late models, pavement circle track, Pro 2\/Pro 4 Off Road Trucks\/Pro Lite, Sports Car\/GT\/GS, Open Wheel\/Formula, Monster Trucks\u003c\/li\u003e \t\u003cli\u003eAll Hawk Performance compounds are not compatible with carbon ceramic rotors. Hawk pads are designed to work with Iron\/Metal rotors.\u003c\/li\u003e \t\u003cli\u003eHigh torque\u003c\/li\u003e \t\u003cli\u003e205DegC-870DegC operating temperatures\u003c\/li\u003e \t\u003cli\u003e425DegC-650DegC optimal temperature range\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eTo ensure correct compatibility we always recommend comparing your existing brake pads to the pad shape diagram provided above. Vehicle fitment provided is to be used as a guide only and may not suit your vehicle.\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eAP Racing CP4567 \/ CP5040-10\/11\/12\/13S4 \/ CP5100 \/ CP5108 \/ CP6760 6-Piston Caliper 16mm Pad Depth\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eImportant - Installation and Brake Bedding Procedure:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003e\u003cu\u003eSTREET\u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eStreet Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eTo break in the new components, make 6 to 10 stops from approximately 30 to 35 MPH\u003c\/li\u003e \t\u003cli\u003eapplying moderate pressure.\u003c\/li\u003e \t\u003cli\u003eMake an additional 2 to 3 hard stops from approximately 40 to 45 MPH.\u003c\/li\u003e \t\u003cli\u003eDO NOT DRAG BRAKES!\u003c\/li\u003e \t\u003cli\u003eAllow 15 minutes for brake system to cool down.\u003c\/li\u003e \t\u003cli\u003eYour brakes are now ready for use and can be driven normally.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cu\u003eMOTORSPORTS \u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad\u003cbr role=\"presentation\"\u003e installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure :\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eMotorsports Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e \t\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e \t\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e \t\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e \t\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003cbr role=\"presentation\"\u003e \u003cu\u003eIMPORTANT REMINDERS WHEN BURNISHING\/BEDDING BRAKE PADS:\u003c\/u\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e \t\u003cli\u003eDo not drag brakes while car is moving during break?in procedure.\u003c\/li\u003e \t\u003cli\u003eDo not engage pedal while car is stopped at any time following the break?in procedure.\u003c\/li\u003e \t\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e \t\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e \t\u003cli\u003eClean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads.\u003c\/li\u003e \t\u003cli\u003eSome forms of racing don’t allow time for the proper break?in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Hawk-Performance-DTC-70-Front-Brake-Pads-AP-Racing-CP4567\/CP5040\/CP5100\/CO6760-16mm-HB192U.620\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003c\/p\u003e","brand":"Hawk Performance","offers":[{"title":"Default Title","offer_id":49433039765807,"sku":"HB192U.620","price":489.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/3903\/9279\/files\/HB192U.620.jpg?v=1714107649"},{"product_id":"hawk-performance-hps-5-0-rear-brake-pads-nissan-gtr-r35-hb193b-670","title":"Hawk Performance HPS 5.0 Front\/Rear Brake Pads","description":"\u003cp\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Hawk-Performance-HPS-5.0-Rear-Brake-Pads-Nissan-GTR-R35-HB193B.670\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003c\/p\u003e  \u003cp\u003eFor years, engine builders have been pushing motors to the limits of their ability, and at Hawk Performance, we're closer than ever to pushing the ABS Rev Limiter to its limits. High Performance Street 5.0 pads give your vehicle the greatest stopping power and pedal feel without compromising ABS. HPS 5.0 is a Ferro-Carbon compound that provides advanced braking characteristics to enhance the driving experience. This compound combines the safety and quality of aerospace design with the braking technology of motorsports. The results are shorter stopping distances, improved performance under heavy braking conditions, and street car friendly characteristics.\u003c\/p\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003e\u003cstrong\u003eSTREET USE ONLY\u003c\/strong\u003e\u003c\/li\u003e \t\u003cli\u003eAggressive torque\u003c\/li\u003e \t\u003cli\u003eGreat rotor \u0026amp; pad wear life\u003c\/li\u003e \t\u003cli\u003eSmooth \u0026amp; predictable control\u003c\/li\u003e \t\u003cli\u003eDesigned to deliver high deceleration rates\u003c\/li\u003e \t\u003cli\u003eConsistent brake release characteristics for a smooth braking feel\u003c\/li\u003e \t\u003cli\u003eAll Hawk Performance compounds are not compatible with carbon ceramic rotors. Hawk pads are designed to work with Iron\/Metal rotors.\u003c\/li\u003e \t\u003cli\u003e38 ¡C-400 ¡C operating temperatures\u003c\/li\u003e \t\u003cli\u003e38 ¡C-290 ¡C optimal temperature range\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eTo ensure correct compatibility we always recommend comparing your existing brake pads to the pad shape diagram provided above. Vehicle fitment provided is to be used as a guide only and may not suit your vehicle.\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eNissan R35 GTR (Rear, 4-Piston Brembo)\u003c\/li\u003e \t\u003cli\u003eFord FPV F6\/GT BA\/BF (Front, 4-Piston Brembo)\u003c\/li\u003e \t\u003cli\u003eFord FPV F6\/GT FG\/FGX (Front, 4-Piston Brembo)\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eImportant - Installation and Brake Bedding Procedure:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003e\u003cu\u003eSTREET\u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eStreet Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eTo break in the new components, make 6 to 10 stops from approximately 30 to 35 MPH\u003c\/li\u003e \t\u003cli\u003eapplying moderate pressure.\u003c\/li\u003e \t\u003cli\u003eMake an additional 2 to 3 hard stops from approximately 40 to 45 MPH.\u003c\/li\u003e \t\u003cli\u003eDO NOT DRAG BRAKES!\u003c\/li\u003e \t\u003cli\u003eAllow 15 minutes for brake system to cool down.\u003c\/li\u003e \t\u003cli\u003eYour brakes are now ready for use and can be driven normally.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cu\u003eMOTORSPORTS \u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad\u003cbr role=\"presentation\"\u003e installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure :\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eMotorsports Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e \t\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e \t\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e \t\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e \t\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003cbr role=\"presentation\"\u003e \u003cu\u003eIMPORTANT REMINDERS WHEN BURNISHING\/BEDDING BRAKE PADS:\u003c\/u\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e \t\u003cli\u003eDo not drag brakes while car is moving during break?in procedure.\u003c\/li\u003e \t\u003cli\u003eDo not engage pedal while car is stopped at any time following the break?in procedure.\u003c\/li\u003e \t\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e \t\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e \t\u003cli\u003eClean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads.\u003c\/li\u003e \t\u003cli\u003eSome forms of racing don’t allow time for the proper break?in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Hawk-Performance-HPS-5.0-Rear-Brake-Pads-Nissan-GTR-R35-HB193B.670\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003c\/p\u003e","brand":"Hawk Performance","offers":[{"title":"Default Title","offer_id":49433040290095,"sku":"HB193B.670","price":289.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/3903\/9279\/files\/HB193B.670.jpg?v=1714107648"},{"product_id":"hawk-performance-hp-front-rear-brake-pads-nissan-g","title":"Hawk Performance HP+ Front\/Rear Brake Pads","description":"\u003cp\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/hawk-performance-hp-front-rear-brake-pads-nissan-g\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003c\/p\u003e  \u003cp\u003eHP Plus utilizes a unique Ferro-Carbon, high-tech friction material that was developed and manufactured for sport driving in autocross, Solo II and Ã’track dayÓ applications. The Ferro-Carbon formulation offers lower wear rates and higher torque values than other competitive materials.\u003c\/p\u003e  \u003cp\u003eExtremely high coefficient of friction makes HP Plus the perfect upgrade over stock for high performance streetcars used in autocross competition or that experience repetitive, heavy braking.\u003c\/p\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eLow to mid temperature range\u003c\/li\u003e \t\u003cli\u003eFade resistant\u003c\/li\u003e \t\u003cli\u003eSmooth \u0026amp; predictable torque\u003c\/li\u003e \t\u003cli\u003eIdeal for Autocross \u0026amp; club racing events\u003c\/li\u003e \t\u003cli\u003eAll Hawk Performance compounds are not compatible with carbon ceramic rotors. Hawk pads are designed to work with Iron\/Metal rotors.\u003c\/li\u003e \t\u003cli\u003eLow torque\u003c\/li\u003e \t\u003cli\u003e38 Deg C-425 Deg C operating temperatures\u003c\/li\u003e \t\u003cli\u003e149 Deg C-315 Deg C optimal temperature range\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eTo ensure correct compatibility we always recommend comparing your existing brake pads to the pad shape diagram provided above. Vehicle fitment provided is to be used as a guide only and may not suit your vehicle.\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eNissan R35 GTR (Rear, 4-Piston Brembo)\u003c\/li\u003e \t\u003cli\u003eFord FPV F6\/GT BA\/BF (Front, 4-Piston Brembo)\u003c\/li\u003e \t\u003cli\u003eFord FPV F6\/GT FG\/FGX (Front, 4-Piston Brembo)\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eImportant - Installation and Brake Bedding Procedure:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003e\u003cu\u003eSTREET\u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eStreet Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eTo break in the new components, make 6 to 10 stops from approximately 30 to 35 MPH\u003c\/li\u003e \t\u003cli\u003eapplying moderate pressure.\u003c\/li\u003e \t\u003cli\u003eMake an additional 2 to 3 hard stops from approximately 40 to 45 MPH.\u003c\/li\u003e \t\u003cli\u003eDO NOT DRAG BRAKES!\u003c\/li\u003e \t\u003cli\u003eAllow 15 minutes for brake system to cool down.\u003c\/li\u003e \t\u003cli\u003eYour brakes are now ready for use and can be driven normally.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cu\u003eMOTORSPORTS \u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad\u003cbr role=\"presentation\"\u003e installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure :\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eMotorsports Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e \t\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e \t\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e \t\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e \t\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003cbr role=\"presentation\"\u003e \u003cu\u003eIMPORTANT REMINDERS WHEN BURNISHING\/BEDDING BRAKE PADS:\u003c\/u\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e \t\u003cli\u003eDo not drag brakes while car is moving during break?in procedure.\u003c\/li\u003e \t\u003cli\u003eDo not engage pedal while car is stopped at any time following the break?in procedure.\u003c\/li\u003e \t\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e \t\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e \t\u003cli\u003eClean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads.\u003c\/li\u003e \t\u003cli\u003eSome forms of racing don’t allow time for the proper break?in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/hawk-performance-hp-front-rear-brake-pads-nissan-g\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003c\/p\u003e","brand":"Hawk Performance","offers":[{"title":"Default Title","offer_id":49433040421167,"sku":"HB193N.670","price":324.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/3903\/9279\/files\/HB193N.670.jpg?v=1714107649"},{"product_id":"hawk-performance-dtc-30-rear-brake-pads-nissan-gtr-r35-hb193w-670","title":"Hawk Performance DTC-30 Front\/Rear Brake Pads","description":"\u003cp\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Hawk-Performance-DTC-30-Rear-Brake-Pads-Nissan-GTR-R35-HB193W.670\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003c\/p\u003e  \u003cp\u003eDTC-30 is a controllable torque, multi-purpose compound, proven effective in a range of series. It delivers superior release characteristics and smooth pedal feel and initial bite for dirt and circle tracks, NASCAR modified, drag racing, trophy trucks, pro buggies, and more.\u003c\/p\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eConsistent, smooth braking\u003c\/li\u003e \t\u003cli\u003eGood cold effectiveness\u003c\/li\u003e \t\u003cli\u003eAll Hawk Performance compounds are not compatible with carbon ceramic rotors. Hawk pads are designed to work with Iron\/Metal rotors.\u003c\/li\u003e \t\u003cli\u003eMedium torque\u003c\/li\u003e \t\u003cli\u003e38çC-649çC operating temperature range\u003c\/li\u003e \t\u003cli\u003e38çC-426çC optimal temperature range\u003c\/li\u003e \t\u003cli\u003eAll Hawk Performance compounds are not compatible with carbon ceramic rotors. Hawk pads are designed to work with Iron\/Metal rotors. \u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eTo ensure correct compatibility we always recommend comparing your existing brake pads to the pad shape diagram provided above. Vehicle fitment provided is to be used as a guide only and may not suit your vehicle.\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eNissan R35 GTR (Rear, 4-Piston Brembo)\u003c\/li\u003e \t\u003cli\u003eFord FPV F6\/GT BA\/BF (Front, 4-Piston Brembo)\u003c\/li\u003e \t\u003cli\u003eFord FPV F6\/GT FG\/FGX (Front, 4-Piston Brembo)\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eImportant - Installation and Brake Bedding Procedure:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003e\u003cu\u003eSTREET\u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eStreet Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eTo break in the new components, make 6 to 10 stops from approximately 30 to 35 MPH\u003c\/li\u003e \t\u003cli\u003eapplying moderate pressure.\u003c\/li\u003e \t\u003cli\u003eMake an additional 2 to 3 hard stops from approximately 40 to 45 MPH.\u003c\/li\u003e \t\u003cli\u003eDO NOT DRAG BRAKES!\u003c\/li\u003e \t\u003cli\u003eAllow 15 minutes for brake system to cool down.\u003c\/li\u003e \t\u003cli\u003eYour brakes are now ready for use and can be driven normally.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cu\u003eMOTORSPORTS \u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad\u003cbr role=\"presentation\"\u003e installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure :\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eMotorsports Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e \t\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e \t\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e \t\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e \t\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003cbr role=\"presentation\"\u003e \u003cu\u003eIMPORTANT REMINDERS WHEN BURNISHING\/BEDDING BRAKE PADS:\u003c\/u\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e \t\u003cli\u003eDo not drag brakes while car is moving during break?in procedure.\u003c\/li\u003e \t\u003cli\u003eDo not engage pedal while car is stopped at any time following the break?in procedure.\u003c\/li\u003e \t\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e \t\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e \t\u003cli\u003eClean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads.\u003c\/li\u003e \t\u003cli\u003eSome forms of racing don’t allow time for the proper break?in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Hawk-Performance-DTC-30-Rear-Brake-Pads-Nissan-GTR-R35-HB193W.670\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003c\/p\u003e","brand":"Hawk Performance","offers":[{"title":"Default Title","offer_id":49433040453935,"sku":"HB193W.670","price":549.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/3903\/9279\/files\/HB193W.670.jpg?v=1714107651"},{"product_id":"hawk-performance-hps-5-0-rear-brake-pads-vf-ss-v-xr6-xr8-300c-srt8-grand-cherokee-srt8-hb194b-570","title":"Hawk Performance HPS 5.0 Rear Brake Pads","description":"\u003cp\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Hawk-Performance-HPS-5.0-Rear-Brake-Pads-VF-SS-V\/XR6\/XR8\/300c-SRT8\/Grand-Cherokee-SRT8-HB194B.570\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003c\/p\u003e  \u003cp\u003eFor years, engine builders have been pushing motors to the limits of their ability, and at Hawk Performance, we're closer than ever to pushing the ABS Rev Limiter to its limits. High Performance Street 5.0 pads give your vehicle the greatest stopping power and pedal feel without compromising ABS. HPS 5.0 is a Ferro-Carbon compound that provides advanced braking characteristics to enhance the driving experience. This compound combines the safety and quality of aerospace design with the braking technology of motorsports. The results are shorter stopping distances, improved performance under heavy braking conditions, and street car friendly characteristics.\u003c\/p\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003e\u003cstrong\u003eSTREET USE ONLY\u003c\/strong\u003e\u003c\/li\u003e \t\u003cli\u003eAggressive torque\u003c\/li\u003e \t\u003cli\u003eGreat rotor \u0026amp; pad wear life\u003c\/li\u003e \t\u003cli\u003eSmooth \u0026amp; predictable control\u003c\/li\u003e \t\u003cli\u003eDesigned to deliver high deceleration rates\u003c\/li\u003e \t\u003cli\u003eConsistent brake release characteristics for a smooth braking feel\u003c\/li\u003e \t\u003cli\u003eAll Hawk Performance compounds are not compatible with carbon ceramic rotors. Hawk pads are designed to work with Iron\/Metal rotors.\u003c\/li\u003e \t\u003cli\u003e38 DegC-400 DegC operating temperatures\u003c\/li\u003e \t\u003cli\u003e38 DegC-290 DegC optimal temperature range\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eTo ensure correct compatibility we always recommend comparing your existing brake pads to the pad shape diagram and measurements provided above. Vehicle fitment provided is to be used as a guide only and may not suit your vehicle.\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003e2005-2010 Chrysler 300C SRT-8 Gen 1 (4 Piston Brembo)\u003c\/li\u003e \t\u003cli\u003e2011-2019 Chrysler 300C SRT-8 Gen 2 (4 Piston Brembo)\u003c\/li\u003e \t\u003cli\u003e2006-2010 Jeep Grand Cherokee SRT-8 WH (4 Piston Brembo)\u003c\/li\u003e \t\u003cli\u003e2011-2019 Jeep Grand Cherokee SRT-8\/SRT WK2 (4 Piston Brembo)\u003c\/li\u003e \t\u003cli\u003e2014-2017 Holden Commodore SS-V Redline VF (4 Piston Brembo)\u003c\/li\u003e \t\u003cli\u003e2010-2015 Chevrolet Camaro Gen 5 (4 Piston Brembo)\u003c\/li\u003e \t\u003cli\u003e2008-2013 Ford Falcon XR6T FG (4 Piston Brembo)\u003c\/li\u003e \t\u003cli\u003e2014-2017 Ford Falcon XR6T FGX (4 Piston Brembo)\u003c\/li\u003e \t\u003cli\u003e2008-2013 Ford Falcon XR8 FG (4 Piston Brembo)\u003c\/li\u003e \t\u003cli\u003e2014-2017 Ford Falcon XR8 FGX (4 Piston Brembo)\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eImportant - Installation and Brake Bedding Procedure:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003e\u003cu\u003eSTREET\u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eStreet Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eTo break in the new components, make 6 to 10 stops from approximately 30 to 35 MPH\u003c\/li\u003e \t\u003cli\u003eapplying moderate pressure.\u003c\/li\u003e \t\u003cli\u003eMake an additional 2 to 3 hard stops from approximately 40 to 45 MPH.\u003c\/li\u003e \t\u003cli\u003eDO NOT DRAG BRAKES!\u003c\/li\u003e \t\u003cli\u003eAllow 15 minutes for brake system to cool down.\u003c\/li\u003e \t\u003cli\u003eYour brakes are now ready for use and can be driven normally.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cu\u003eMOTORSPORTS \u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad\u003cbr role=\"presentation\"\u003e installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure :\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eMotorsports Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e \t\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e \t\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e \t\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e \t\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003cbr role=\"presentation\"\u003e \u003cu\u003eIMPORTANT REMINDERS WHEN BURNISHING\/BEDDING BRAKE PADS:\u003c\/u\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e \t\u003cli\u003eDo not drag brakes while car is moving during break?in procedure.\u003c\/li\u003e \t\u003cli\u003eDo not engage pedal while car is stopped at any time following the break?in procedure.\u003c\/li\u003e \t\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e \t\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e \t\u003cli\u003eClean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads.\u003c\/li\u003e \t\u003cli\u003eSome forms of racing don’t allow time for the proper break?in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Hawk-Performance-HPS-5.0-Rear-Brake-Pads-VF-SS-V\/XR6\/XR8\/300c-SRT8\/Grand-Cherokee-SRT8-HB194B.570\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003c\/p\u003e","brand":"Hawk Performance","offers":[{"title":"Default Title","offer_id":49433040486703,"sku":"HB194B.570","price":234.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/3903\/9279\/files\/HB194B.570.jpg?v=1714107650"},{"product_id":"hawk-performance-ceramic-rear-brake-pads-nissan-gtr-r35-hb193z-670","title":"Hawk Performance Ceramic Front\/Rear Brake Pads","description":"\u003cp\u003eHawk understands the needs of today's ceramic brake pad users and has specifically formulated our composite material to meet - and beat - the stringent low noise, ultra-low dust performance standards they have set. Engineered to reduce brake NVH (Noise, Vibration and Harshness), Performance Ceramic is a premium disc brake pad that delivers excellent performance mile after mile. Providing a linear friction profile that allows your vehicle's ABS system to operate most effectively, our unique compound has the advantage of never sacrificing power to achieve traditional ceramic pad attributes. With Hawk's PC, you can expect reduced brake pad wear, longer rotor life, and our quietest ride ever.\u003c\/p\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003e\u003cstrong\u003eSTREET USE ONLY\u003c\/strong\u003e\u003c\/li\u003e \t\u003cli\u003eExtremely quiet\u003c\/li\u003e \t\u003cli\u003eUltra-low dust\u003c\/li\u003e \t\u003cli\u003eImproved stopping power\u003c\/li\u003e \t\u003cli\u003eGentle on rotors for extended pad life\u003c\/li\u003e \t\u003cli\u003eStable friction output\u003c\/li\u003e \t\u003cli\u003eAll Hawk Performance compounds are not compatible with carbon ceramic rotors. Hawk pads are designed to work with Iron\/Metal rotors.\u003c\/li\u003e \t\u003cli\u003e38C-343C operating temperature range\u003c\/li\u003e \t\u003cli\u003e38C-232C optimal temperature range\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eTo ensure correct compatibility we always recommend comparing your existing brake pads to the pad shape diagram provided above. Vehicle fitment provided is to be used as a guide only and may not suit your vehicle.\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eNissan R35 GTR (Rear, 4-Piston Brembo)\u003c\/li\u003e \t\u003cli\u003eFord FPV F6\/GT BA\/BF (Front, 4-Piston Brembo)\u003c\/li\u003e \t\u003cli\u003eFord FPV F6\/GT FG\/FGX (Front, 4-Piston Brembo)\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eImportant - Installation and Brake Bedding Procedure:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003e\u003cu\u003eSTREET\u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eStreet Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eTo break in the new components, make 6 to 10 stops from approximately 30 to 35 MPH\u003c\/li\u003e \t\u003cli\u003eapplying moderate pressure.\u003c\/li\u003e \t\u003cli\u003eMake an additional 2 to 3 hard stops from approximately 40 to 45 MPH.\u003c\/li\u003e \t\u003cli\u003eDO NOT DRAG BRAKES!\u003c\/li\u003e \t\u003cli\u003eAllow 15 minutes for brake system to cool down.\u003c\/li\u003e \t\u003cli\u003eYour brakes are now ready for use and can be driven normally.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cu\u003eMOTORSPORTS \u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad\u003cbr role=\"presentation\"\u003e installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure :\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eMotorsports Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e \t\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e \t\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e \t\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e \t\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003cbr role=\"presentation\"\u003e \u003cu\u003eIMPORTANT REMINDERS WHEN BURNISHING\/BEDDING BRAKE PADS:\u003c\/u\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e \t\u003cli\u003eDo not drag brakes while car is moving during break?in procedure.\u003c\/li\u003e \t\u003cli\u003eDo not engage pedal while car is stopped at any time following the break?in procedure.\u003c\/li\u003e \t\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e \t\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e \t\u003cli\u003eClean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads.\u003c\/li\u003e \t\u003cli\u003eSome forms of racing don’t allow time for the proper break?in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible\u003c\/li\u003e \u003c\/ul\u003e","brand":"Hawk Performance","offers":[{"title":"Default Title","offer_id":49433040519471,"sku":"HB193Z.670","price":319.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/3903\/9279\/files\/HB193Z.670.jpg?v=1714107650"},{"product_id":"hawk-performance-hp-rear-brake-pads-commodore-ss-v","title":"Hawk Performance HP+ Rear Brake Pads","description":"\u003cp\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/hawk-performance-hp-rear-brake-pads-commodore-ss-v\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003c\/p\u003e  \u003cp\u003eHP Plus utilizes a unique Ferro-Carbon, high-tech friction material that was developed and manufactured for sport driving in autocross, Solo II and Ã’track dayÓ applications. The Ferro-Carbon formulation offers lower wear rates and higher torque values than other competitive materials.\u003c\/p\u003e  \u003cp\u003eExtremely high coefficient of friction makes HP Plus the perfect upgrade over stock for high performance streetcars used in autocross competition or that experience repetitive, heavy braking.\u003c\/p\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eLow to mid temperature range\u003c\/li\u003e \t\u003cli\u003eFade resistant\u003c\/li\u003e \t\u003cli\u003eSmooth \u0026amp; predictable torque\u003c\/li\u003e \t\u003cli\u003eIdeal for Autocross \u0026amp; club racing events\u003c\/li\u003e \t\u003cli\u003eAll Hawk Performance compounds are not compatible with carbon ceramic rotors. Hawk pads are designed to work with Iron\/Metal rotors.\u003c\/li\u003e \t\u003cli\u003eLow torque\u003c\/li\u003e \t\u003cli\u003e38 Deg C-425 Deg C operating temperatures\u003c\/li\u003e \t\u003cli\u003e149 Deg C-315 Deg C optimal temperature range\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eTo ensure correct compatibility we always recommend comparing your existing brake pads to the pad shape diagram and measurements provided above. Vehicle fitment provided is to be used as a guide only and may not suit your vehicle.\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003e2005-2010 Chrysler 300C SRT-8 Gen 1 (4 Piston Brembo)\u003c\/li\u003e \t\u003cli\u003e2011-2019 Chrysler 300C SRT-8 Gen 2 (4 Piston Brembo)\u003c\/li\u003e \t\u003cli\u003e2006-2010 Jeep Grand Cherokee SRT-8 WH (4 Piston Brembo)\u003c\/li\u003e \t\u003cli\u003e2011-2019 Jeep Grand Cherokee SRT-8\/SRT WK2 (4 Piston Brembo)\u003c\/li\u003e \t\u003cli\u003e2014-2017 Holden Commodore SS-V Redline VF (4 Piston Brembo)\u003c\/li\u003e \t\u003cli\u003e2010-2015 Chevrolet Camaro Gen 5 (4 Piston Brembo)\u003c\/li\u003e \t\u003cli\u003e2008-2013 Ford Falcon XR6T FG (4 Piston Brembo)\u003c\/li\u003e \t\u003cli\u003e2014-2017 Ford Falcon XR6T FGX (4 Piston Brembo)\u003c\/li\u003e \t\u003cli\u003e2008-2013 Ford Falcon XR8 FG (4 Piston Brembo)\u003c\/li\u003e \t\u003cli\u003e2014-2017 Ford Falcon XR8 FGX (4 Piston Brembo)\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eImportant - Installation and Brake Bedding Procedure:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003e\u003cu\u003eSTREET\u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eStreet Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eTo break in the new components, make 6 to 10 stops from approximately 30 to 35 MPH\u003c\/li\u003e \t\u003cli\u003eapplying moderate pressure.\u003c\/li\u003e \t\u003cli\u003eMake an additional 2 to 3 hard stops from approximately 40 to 45 MPH.\u003c\/li\u003e \t\u003cli\u003eDO NOT DRAG BRAKES!\u003c\/li\u003e \t\u003cli\u003eAllow 15 minutes for brake system to cool down.\u003c\/li\u003e \t\u003cli\u003eYour brakes are now ready for use and can be driven normally.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cu\u003eMOTORSPORTS \u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad\u003cbr role=\"presentation\"\u003e installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure :\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eMotorsports Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e \t\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e \t\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e \t\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e \t\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003cbr role=\"presentation\"\u003e \u003cu\u003eIMPORTANT REMINDERS WHEN BURNISHING\/BEDDING BRAKE PADS:\u003c\/u\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e \t\u003cli\u003eDo not drag brakes while car is moving during break?in procedure.\u003c\/li\u003e \t\u003cli\u003eDo not engage pedal while car is stopped at any time following the break?in procedure.\u003c\/li\u003e \t\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e \t\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e \t\u003cli\u003eClean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads.\u003c\/li\u003e \t\u003cli\u003eSome forms of racing don’t allow time for the proper break?in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/hawk-performance-hp-rear-brake-pads-commodore-ss-v\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003c\/p\u003e","brand":"Hawk Performance","offers":[{"title":"Default Title","offer_id":49433040617775,"sku":"HB194N.570","price":289.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/3903\/9279\/files\/HB194N.570.jpg?v=1714107652"},{"product_id":"hawk-performance-ceramic-rear-brake-pads-vf-ss-v-xr6-xr8-300c-srt8-grand-cherokee-srt8-hb194z-570","title":"Hawk Performance Ceramic Rear Brake Pads","description":"\u003cp\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Hawk-Performance-Ceramic-Rear-Brake-Pads-VF-SS-V\/XR6\/XR8\/300c-SRT8\/Grand-Cherokee-SRT8-HB194Z.570\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003c\/p\u003e  \u003cp\u003eHawk understands the needs of today's ceramic brake pad users and has specifically formulated our composite material to meet - and beat - the stringent low noise, ultra-low dust performance standards they have set. Engineered to reduce brake NVH (Noise, Vibration and Harshness), Performance Ceramic is a premium disc brake pad that delivers excellent performance mile after mile. Providing a linear friction profile that allows your vehicle's ABS system to operate most effectively, our unique compound has the advantage of never sacrificing power to achieve traditional ceramic pad attributes. With Hawk's PC, you can expect reduced brake pad wear, longer rotor life, and our quietest ride ever.\u003c\/p\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003e\u003cstrong\u003eSTREET USE ONLY\u003c\/strong\u003e\u003c\/li\u003e \t\u003cli\u003eExtremely quiet\u003c\/li\u003e \t\u003cli\u003eUltra-low dust\u003c\/li\u003e \t\u003cli\u003eImproved stopping power\u003c\/li\u003e \t\u003cli\u003eGentle on rotors for extended pad life\u003c\/li\u003e \t\u003cli\u003eStable friction output\u003c\/li\u003e \t\u003cli\u003eAll Hawk Performance compounds are not compatible with carbon ceramic rotors. Hawk pads are designed to work with Iron\/Metal rotors.\u003c\/li\u003e \t\u003cli\u003e38C-343C operating temperature range\u003c\/li\u003e \t\u003cli\u003e38C-232C optimal temperature range\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eTo ensure correct compatibility we always recommend comparing your existing brake pads to the pad shape diagram and measurements provided above. Vehicle fitment provided is to be used as a guide only and may not suit your vehicle.\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003e2005-2010 Chrysler 300C SRT-8 Gen 1 (4 Piston Brembo)\u003c\/li\u003e \t\u003cli\u003e2011-2019 Chrysler 300C SRT-8 Gen 2 (4 Piston Brembo)\u003c\/li\u003e \t\u003cli\u003e2006-2010 Jeep Grand Cherokee SRT-8 WH (4 Piston Brembo)\u003c\/li\u003e \t\u003cli\u003e2011-2019 Jeep Grand Cherokee SRT-8\/SRT WK2 (4 Piston Brembo)\u003c\/li\u003e \t\u003cli\u003e2014-2017 Holden Commodore SS-V Redline VF (4 Piston Brembo)\u003c\/li\u003e \t\u003cli\u003e2010-2015 Chevrolet Camaro Gen 5 (4 Piston Brembo)\u003c\/li\u003e \t\u003cli\u003e2008-2013 Ford Falcon XR6T FG (4 Piston Brembo)\u003c\/li\u003e \t\u003cli\u003e2014-2017 Ford Falcon XR6T FGX (4 Piston Brembo)\u003c\/li\u003e \t\u003cli\u003e2008-2013 Ford Falcon XR8 FG (4 Piston Brembo)\u003c\/li\u003e \t\u003cli\u003e2014-2017 Ford Falcon XR8 FGX (4 Piston Brembo)\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eImportant - Installation and Brake Bedding Procedure:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003e\u003cu\u003eSTREET\u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eStreet Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eTo break in the new components, make 6 to 10 stops from approximately 30 to 35 MPH\u003c\/li\u003e \t\u003cli\u003eapplying moderate pressure.\u003c\/li\u003e \t\u003cli\u003eMake an additional 2 to 3 hard stops from approximately 40 to 45 MPH.\u003c\/li\u003e \t\u003cli\u003eDO NOT DRAG BRAKES!\u003c\/li\u003e \t\u003cli\u003eAllow 15 minutes for brake system to cool down.\u003c\/li\u003e \t\u003cli\u003eYour brakes are now ready for use and can be driven normally.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cu\u003eMOTORSPORTS \u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad\u003cbr role=\"presentation\"\u003e installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure :\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eMotorsports Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e \t\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e \t\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e \t\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e \t\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003cbr role=\"presentation\"\u003e \u003cu\u003eIMPORTANT REMINDERS WHEN BURNISHING\/BEDDING BRAKE PADS:\u003c\/u\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e \t\u003cli\u003eDo not drag brakes while car is moving during break?in procedure.\u003c\/li\u003e \t\u003cli\u003eDo not engage pedal while car is stopped at any time following the break?in procedure.\u003c\/li\u003e \t\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e \t\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e \t\u003cli\u003eClean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads.\u003c\/li\u003e \t\u003cli\u003eSome forms of racing don’t allow time for the proper break?in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Hawk-Performance-Ceramic-Rear-Brake-Pads-VF-SS-V\/XR6\/XR8\/300c-SRT8\/Grand-Cherokee-SRT8-HB194Z.570\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003c\/p\u003e","brand":"Hawk Performance","offers":[{"title":"Default Title","offer_id":49433040683311,"sku":"HB194Z.570","price":279.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/3903\/9279\/files\/HB194Z.570.jpg?v=1714107651"},{"product_id":"hawk-performance-ceramic-front-brake-pads-honda-civic-ek-integra-dc2-96-spec-hb245z-631","title":"Hawk Performance Ceramic Front Brake Pads","description":"\u003cp\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Hawk-Performance-Ceramic-Front-Brake-Pads-Honda-Civic-EK\/Integra-DC2-96-Spec-HB245Z.631\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003c\/p\u003e  \u003cp\u003eHawk understands the needs of today's ceramic brake pad users and has specifically formulated our composite material to meet - and beat - the stringent low noise, ultra-low dust performance standards they have set. Engineered to reduce brake NVH (Noise, Vibration and Harshness), Performance Ceramic is a premium disc brake pad that delivers excellent performance mile after mile. Providing a linear friction profile that allows your vehicle's ABS system to operate most effectively, our unique compound has the advantage of never sacrificing power to achieve traditional ceramic pad attributes. With Hawk's PC, you can expect reduced brake pad wear, longer rotor life, and our quietest ride ever.\u003c\/p\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eExtremely quiet\u003c\/li\u003e \t\u003cli\u003eUltra-low dust\u003c\/li\u003e \t\u003cli\u003eImproved stopping power\u003c\/li\u003e \t\u003cli\u003eGentle on rotors for extended pad life\u003c\/li\u003e \t\u003cli\u003eStable friction output\u003c\/li\u003e \t\u003cli\u003eAll Hawk Performance compounds are not compatible with carbon ceramic rotors. Hawk pads are designed to work with Iron\/Metal rotors.\u003c\/li\u003e \t\u003cli\u003e38C-343C operating temperature range\u003c\/li\u003e \t\u003cli\u003e38C-232C optimal temperature range\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eTo ensure correct compatibility we always recommend comparing your existing brake pads to the pad shape diagram provided above. Vehicle fitment provided is to be used as a guide only and may not suit your vehicle.\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003e1991-1996 Honda NSX\u003c\/li\u003e \t\u003cli\u003e1996-2000 Honda Civic EK VTEC 96 Spec\u003c\/li\u003e \t\u003cli\u003e1994-2001 Honda Integra DC2 (Inc Type-R, 96 Spec)\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eImportant - Installation and Brake Bedding Procedure:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003e\u003cu\u003eSTREET\u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eStreet Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eTo break in the new components, make 6 to 10 stops from approximately 30 to 35 MPH\u003c\/li\u003e \t\u003cli\u003eapplying moderate pressure.\u003c\/li\u003e \t\u003cli\u003eMake an additional 2 to 3 hard stops from approximately 40 to 45 MPH.\u003c\/li\u003e \t\u003cli\u003eDO NOT DRAG BRAKES!\u003c\/li\u003e \t\u003cli\u003eAllow 15 minutes for brake system to cool down.\u003c\/li\u003e \t\u003cli\u003eYour brakes are now ready for use and can be driven normally.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cu\u003eMOTORSPORTS \u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad\u003cbr role=\"presentation\"\u003e installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure :\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eMotorsports Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e \t\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e \t\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e \t\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e \t\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003cbr role=\"presentation\"\u003e \u003cu\u003eIMPORTANT REMINDERS WHEN BURNISHING\/BEDDING BRAKE PADS:\u003c\/u\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e \t\u003cli\u003eDo not drag brakes while car is moving during break?in procedure.\u003c\/li\u003e \t\u003cli\u003eDo not engage pedal while car is stopped at any time following the break?in procedure.\u003c\/li\u003e \t\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e \t\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e \t\u003cli\u003eClean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads.\u003c\/li\u003e \t\u003cli\u003eSome forms of racing don’t allow time for the proper break?in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Hawk-Performance-Ceramic-Front-Brake-Pads-Honda-Civic-EK\/Integra-DC2-96-Spec-HB245Z.631\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003c\/p\u003e","brand":"Hawk Performance","offers":[{"title":"Default Title","offer_id":49433041076527,"sku":"HB245Z.631","price":139.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/3903\/9279\/files\/HB245Z.631.jpg?v=1714107652"},{"product_id":"hawk-performance-ceramic-front-brake-pads-s13-r32-gts-stagea-cefiro-laurel-hb268z-665","title":"Hawk Performance Ceramic Front Brake Pads","description":"\u003cp\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Hawk-Performance-Ceramic-Front-Brake-Pads-S13\/R32-GTS\/Stagea\/Cefiro\/Laurel-HB268Z.665\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003c\/p\u003e  \u003cp\u003eHawk understands the needs of today's ceramic brake pad users and has specifically formulated our composite material to meet - and beat - the stringent low noise, ultra-low dust performance standards they have set. Engineered to reduce brake NVH (Noise, Vibration and Harshness), Performance Ceramic is a premium disc brake pad that delivers excellent performance mile after mile. Providing a linear friction profile that allows your vehicle's ABS system to operate most effectively, our unique compound has the advantage of never sacrificing power to achieve traditional ceramic pad attributes. With Hawk's PC, you can expect reduced brake pad wear, longer rotor life, and our quietest ride ever.\u003c\/p\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003e\u003cstrong\u003eSTREET USE ONLY\u003c\/strong\u003e\u003c\/li\u003e \t\u003cli\u003eExtremely quiet\u003c\/li\u003e \t\u003cli\u003eUltra-low dust\u003c\/li\u003e \t\u003cli\u003eImproved stopping power\u003c\/li\u003e \t\u003cli\u003eGentle on rotors for extended pad life\u003c\/li\u003e \t\u003cli\u003eStable friction output\u003c\/li\u003e \t\u003cli\u003eAll Hawk Performance compounds are not compatible with carbon ceramic rotors. Hawk pads are designed to work with Iron\/Metal rotors.\u003c\/li\u003e \t\u003cli\u003e38 ¡C-343 ¡C operating temperature range\u003c\/li\u003e \t\u003cli\u003e38 ¡C-232 ¡C optimal temperature range\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eTo ensure correct compatibility we always recommend comparing your existing brake pads to the pad shape diagram provided above. Vehicle fitment provided is to be used as a guide only and may not suit your vehicle.\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eNissan S13 Silvia\/180\/SX 4-Stud (2 Pot Sliding Caliper)\u003c\/li\u003e \t\u003cli\u003eNissan R32 Skyline GTS (2 Pot Sliding Caliper)\u003c\/li\u003e \t\u003cli\u003e2001-2007 Nissan Skyline V35 (2 Pot Sliding Caliper)\u003c\/li\u003e \t\u003cli\u003e1996-2001 Nissan WC34 Stagea S1\/S2 (2 Pot Sliding Caliper)\u003c\/li\u003e \t\u003cli\u003e1988-1993 Nissan A31 Cefiro (2 Pot Sliding Caliper)\u003c\/li\u003e \t\u003cli\u003e1989-1993 Nissan C33 Laurel (2 Pot Sliding Caliper)\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eImportant - Installation and Brake Bedding Procedure:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003e\u003cu\u003eSTREET\u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eStreet Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eTo break in the new components, make 6 to 10 stops from approximately 30 to 35 MPH\u003c\/li\u003e \t\u003cli\u003eapplying moderate pressure.\u003c\/li\u003e \t\u003cli\u003eMake an additional 2 to 3 hard stops from approximately 40 to 45 MPH.\u003c\/li\u003e \t\u003cli\u003eDO NOT DRAG BRAKES!\u003c\/li\u003e \t\u003cli\u003eAllow 15 minutes for brake system to cool down.\u003c\/li\u003e \t\u003cli\u003eYour brakes are now ready for use and can be driven normally.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cu\u003eMOTORSPORTS \u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad\u003cbr role=\"presentation\"\u003e installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure :\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eMotorsports Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e \t\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e \t\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e \t\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e \t\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003cbr role=\"presentation\"\u003e \u003cu\u003eIMPORTANT REMINDERS WHEN BURNISHING\/BEDDING BRAKE PADS:\u003c\/u\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e \t\u003cli\u003eDo not drag brakes while car is moving during break?in procedure.\u003c\/li\u003e \t\u003cli\u003eDo not engage pedal while car is stopped at any time following the break?in procedure.\u003c\/li\u003e \t\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e \t\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e \t\u003cli\u003eClean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads.\u003c\/li\u003e \t\u003cli\u003eSome forms of racing don’t allow time for the proper break?in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Hawk-Performance-Ceramic-Front-Brake-Pads-S13\/R32-GTS\/Stagea\/Cefiro\/Laurel-HB268Z.665\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003c\/p\u003e","brand":"Hawk Performance","offers":[{"title":"Default Title","offer_id":49433041174831,"sku":"HB268Z.665","price":249.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/3903\/9279\/files\/HB268Z.665.jpg?v=1714107653"},{"product_id":"hawk-performance-super-duty-front-brake-pads-hummer-h2-hb322p-717","title":"Hawk Performance Super Duty Front Brake Pads","description":"\u003cp\u003e\u003ca style=\"text-decoration: none;\" href=\"https:\/\/www.prospeedracing.com.au\/Hawk-Performance-Super-Duty-Front-Brake-Pads-Hummer-H2-HB322P.717\"\u003e \u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eFor over 25 years, Hawk Performance has developed friction solutions for some of the largest trucks on the planet. Our products are used by both OE and aftermarket companies servicing the mining, construction, military and commercial truck markets, and Hawk's SuperDuty compound features that same high performance, severe-duty friction technology. The unique Ferro-Carbon material in SD disc brake pads delivers extremely high fade resistance, with superior high-temperature rotor and brake pad wear. This compound has been engineered for Class 2 and higher, on-highway, commercial-grade vehicles. This product is not recommended for personal or recreational trucks and SUVs.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"productList__description\"\u003e\n\u003cdiv class=\"grid__column grid__column--12 grid__column--6--md mbm mtl\"\u003e\n\u003cul\u003e\n\u003cli\u003eTechnology engineered for use in heavy-duty on\/off highway and military applications\u003c\/li\u003e\n\u003cli\u003eExtremely high coefficient of friction and fade resistance\u003c\/li\u003e\n\u003cli\u003eRecommended for professional fleets (greater than 1 ton) and light trucks towing excessive payloads\u003c\/li\u003e\n\u003cli\u003eAll Hawk Performance compounds are not compatible with carbon ceramic rotors. Hawk pads are designed to work with Iron\/Metal rotors.\u003c\/li\u003e\n\u003cli\u003eLow torque\u003c\/li\u003e\n\u003cli\u003e37 Deg C - 400 Deg C operating temperatures\u003c\/li\u003e\n\u003cli\u003e37 Deg C - 260 Deg C optimal temperature range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTo ensure correct compatibility we always recommend comparing your existing brake pads to the pad shape diagram provided above. Vehicle fitment provided is to be used as a guide only and may not suit your vehicle.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHummer H2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant - Installation and Brake Bedding Procedure:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cu\u003eSTREET\u003c\/u\u003e\u003c\/p\u003e\n\u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e\n\u003cp\u003eBrake Pad Installation Procedure:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e\n\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e\n\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e\n\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e\n\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e\n\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eStreet Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTo break in the new components, make 6 to 10 stops from approximately 30 to 35 MPH\u003c\/li\u003e\n\u003cli\u003eapplying moderate pressure.\u003c\/li\u003e\n\u003cli\u003eMake an additional 2 to 3 hard stops from approximately 40 to 45 MPH.\u003c\/li\u003e\n\u003cli\u003eDO NOT DRAG BRAKES!\u003c\/li\u003e\n\u003cli\u003eAllow 15 minutes for brake system to cool down.\u003c\/li\u003e\n\u003cli\u003eYour brakes are now ready for use and can be driven normally.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cu\u003eMOTORSPORTS \u003c\/u\u003e\u003c\/p\u003e\n\u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad\u003cbr role=\"presentation\"\u003einstallation instructions provided by the vehicle manufacturer.\u003c\/p\u003e\n\u003cp\u003eBrake Pad Installation Procedure :\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e\n\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e\n\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e\n\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e\n\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e\n\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMotorsports Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e\n\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e\n\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e\n\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e\n\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr role=\"presentation\"\u003e\u003cu\u003eIMPORTANT REMINDERS WHEN BURNISHING\/BEDDING BRAKE PADS:\u003c\/u\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e\n\u003cli\u003eDo not drag brakes while car is moving during break?in procedure.\u003c\/li\u003e\n\u003cli\u003eDo not engage pedal while car is stopped at any time following the break?in procedure.\u003c\/li\u003e\n\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e\n\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e\n\u003cli\u003eClean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads.\u003c\/li\u003e\n\u003cli\u003eSome forms of racing don’t allow time for the proper break?in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca style=\"text-decoration: none;\" href=\"https:\/\/www.prospeedracing.com.au\/Hawk-Performance-Super-Duty-Front-Brake-Pads-Hummer-H2-HB322P.717\"\u003e \u003c\/a\u003e\u003c\/p\u003e","brand":"Hawk Performance","offers":[{"title":"Default Title","offer_id":49433041240367,"sku":"HB322P.717","price":244.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/3903\/9279\/files\/HB322P.717.jpg?v=1714107654"},{"product_id":"hawk-performance-hps-5-0-rear-brake-pads-honda-civic-ef-eg-ek-crx-jazz-ge-hb350b-496","title":"Hawk Performance HPS 5.0 Rear Brake Pads","description":"\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Hawk-Performance-HPS-5.0-Rear-Brake-Pads-Honda-Civic-EF\/EG\/EK\/CRX\/Jazz-GE-HB350B.496\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003cp\u003eFor years, engine builders have been pushing motors to the limits of their ability, and at Hawk Performance, we're closer than ever to pushing the ABS Rev Limiter to its limits. High Performance Street 5.0 pads give your vehicle the greatest stopping power and pedal feel without compromising ABS. HPS 5.0 is a Ferro-Carbon compound that provides advanced braking characteristics to enhance the driving experience. This compound combines the safety and quality of aerospace design with the braking technology of motorsports. The results are shorter stopping distances, improved performance under heavy braking conditions, and street car friendly characteristics.\u003c\/p\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eAggressive torque\u003c\/li\u003e \t\u003cli\u003eGreat rotor \u0026amp; pad wear life\u003c\/li\u003e \t\u003cli\u003eSmooth \u0026amp; predictable control\u003c\/li\u003e \t\u003cli\u003eDesigned to deliver high deceleration rates\u003c\/li\u003e \t\u003cli\u003eConsistent brake release characteristics for a smooth braking feel\u003c\/li\u003e \t\u003cli\u003eAll Hawk Performance compounds are not compatible with carbon ceramic rotors. Hawk pads are designed to work with Iron\/Metal rotors.\u003c\/li\u003e \t\u003cli\u003e38 ¡C-400 ¡C operating temperatures\u003c\/li\u003e \t\u003cli\u003e38 ¡C-290 ¡C optimal temperature range\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eTo ensure correct compatibility we always recommend comparing your existing brake pads to the pad shape diagram provided above. Vehicle fitment provided is to be used as a guide only and may not suit your vehicle.\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003e1987-1991 Honda Civic ED\/EF\u003c\/li\u003e \t\u003cli\u003e1991-1995 Honda Civic EG\u003c\/li\u003e \t\u003cli\u003e1996-2000 Honda Civic EK\u003c\/li\u003e \t\u003cli\u003e1987-1991 Honda CR-X EF\u003c\/li\u003e \t\u003cli\u003e1992-1996 Honda CR-X EG\u003c\/li\u003e \t\u003cli\u003e2008-2014 Honda Jazz GE\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImportant - Installation and Brake Bedding Procedure:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003e\u003cu\u003eSTREET\u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eStreet Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eTo break in the new components, make 6 to 10 stops from approximately 30 to 35 MPH\u003c\/li\u003e \t\u003cli\u003eapplying moderate pressure.\u003c\/li\u003e \t\u003cli\u003eMake an additional 2 to 3 hard stops from approximately 40 to 45 MPH.\u003c\/li\u003e \t\u003cli\u003eDO NOT DRAG BRAKES!\u003c\/li\u003e \t\u003cli\u003eAllow 15 minutes for brake system to cool down.\u003c\/li\u003e \t\u003cli\u003eYour brakes are now ready for use and can be driven normally.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cu\u003eMOTORSPORTS \u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad\u003cbr role=\"presentation\"\u003e installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure :\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eMotorsports Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e \t\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e \t\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e \t\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e \t\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003cbr role=\"presentation\"\u003e \u003cu\u003eIMPORTANT REMINDERS WHEN BURNISHING\/BEDDING BRAKE PADS:\u003c\/u\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e \t\u003cli\u003eDo not drag brakes while car is moving during break?in procedure.\u003c\/li\u003e \t\u003cli\u003eDo not engage pedal while car is stopped at any time following the break?in procedure.\u003c\/li\u003e \t\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e \t\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e \t\u003cli\u003eClean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads.\u003c\/li\u003e \t\u003cli\u003eSome forms of racing don’t allow time for the proper break?in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible\u003c\/li\u003e \u003c\/ul\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Hawk-Performance-HPS-5.0-Rear-Brake-Pads-Honda-Civic-EF\/EG\/EK\/CRX\/Jazz-GE-HB350B.496\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e","brand":"Hawk Performance","offers":[{"title":"Default Title","offer_id":49433041338671,"sku":"HB350B.496","price":204.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/3903\/9279\/files\/HB350B.496.jpg?v=1714107653"},{"product_id":"hawk-performance-hp-front-brake-pads-subaru-wrx-sti-94-98-impreza-94-00-forester-97-02-hb352n","title":"Hawk Performance HP+ Front Brake Pads","description":"\u003cp\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Hawk-Performance-HP-Front-Brake-Pads-Subaru-WRX\/STI-94-98\/Impreza-94-00\/Forester-97-02-HB352N\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003c\/p\u003e  \u003cp\u003eHP Plus utilizes a unique Ferro-Carbon, high-tech friction material that was developed and manufactured for sport driving in autocross, Solo II and track day applications. The Ferro-Carbon formulation offers lower wear rates and higher torque values than other competitive materials.\u003c\/p\u003e  \u003cp\u003eExtremely high coefficient of friction makes HP Plus the perfect upgrade over stock for high performance streetcars used in autocross competition or that experience repetitive, heavy braking.\u003c\/p\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eLow to mid temperature range\u003c\/li\u003e \t\u003cli\u003eFade resistant\u003c\/li\u003e \t\u003cli\u003eSmooth \u0026amp; predictable torque\u003c\/li\u003e \t\u003cli\u003eIdeal for Autocross \u0026amp; club racing events\u003c\/li\u003e \t\u003cli\u003eAll Hawk Performance compounds are not compatible with carbon ceramic rotors. Hawk pads are designed to work with Iron\/Metal rotors.\u003c\/li\u003e \t\u003cli\u003eLow torque\u003c\/li\u003e \t\u003cli\u003e38 Deg C-425 Deg C operating temperatures\u003c\/li\u003e \t\u003cli\u003e149 Deg C-315 Deg C optimal temperature range\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eTo ensure correct compatibility we always recommend comparing your existing brake pads to the pad shape diagram provided above. Vehicle fitment provided is to be used as a guide only and may not suit your vehicle.\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003e1994-1998 Subaru WRX GC8\/GF8\u003c\/li\u003e \t\u003cli\u003e1994-1998 Subaru STI GC8\u003c\/li\u003e \t\u003cli\u003e1997-2002 Subaru Forester SF (Inc GT)\u003c\/li\u003e \t\u003cli\u003e1994-2000 Subaru Impreza GC\/GF\u003c\/li\u003e \t\u003cli\u003e1993-1998 Subaru Liberty BF\/BG\u003c\/li\u003e \t\u003cli\u003e1998-2003 Subaru Liberty BE\/BH\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eImportant - Installation and Brake Bedding Procedure:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003e\u003cu\u003eSTREET\u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eStreet Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eTo break in the new components, make 6 to 10 stops from approximately 30 to 35 MPH\u003c\/li\u003e \t\u003cli\u003eapplying moderate pressure.\u003c\/li\u003e \t\u003cli\u003eMake an additional 2 to 3 hard stops from approximately 40 to 45 MPH.\u003c\/li\u003e \t\u003cli\u003eDO NOT DRAG BRAKES!\u003c\/li\u003e \t\u003cli\u003eAllow 15 minutes for brake system to cool down.\u003c\/li\u003e \t\u003cli\u003eYour brakes are now ready for use and can be driven normally.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cu\u003eMOTORSPORTS \u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad\u003cbr role=\"presentation\"\u003e installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure :\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eMotorsports Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e \t\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e \t\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e \t\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e \t\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003cbr role=\"presentation\"\u003e \u003cu\u003eIMPORTANT REMINDERS WHEN BURNISHING\/BEDDING BRAKE PADS:\u003c\/u\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e \t\u003cli\u003eDo not drag brakes while car is moving during break?in procedure.\u003c\/li\u003e \t\u003cli\u003eDo not engage pedal while car is stopped at any time following the break?in procedure.\u003c\/li\u003e \t\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e \t\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e \t\u003cli\u003eClean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads.\u003c\/li\u003e \t\u003cli\u003eSome forms of racing don’t allow time for the proper break?in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Hawk-Performance-HP-Front-Brake-Pads-Subaru-WRX\/STI-94-98\/Impreza-94-00\/Forester-97-02-HB352N\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003c\/p\u003e","brand":"Hawk Performance","offers":[{"title":"Default Title","offer_id":49433041469743,"sku":"HB352N.665","price":219.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/3903\/9279\/files\/HB352N.665.jpg?v=1714107655"},{"product_id":"hawk-performance-hps-5-0-front-brake-pads-subaru-wrx-sti-94-98-impreza-94-00-forester-97-02-hb352b","title":"Hawk Performance HPS 5.0 Front Brake Pads","description":"\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Hawk-Performance-HPS-5.0-Front-Brake-Pads-Subaru-WRX\/STI-94-98\/Impreza-94-00\/Forester-97-02-HB352B\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003cp\u003eFor years, engine builders have been pushing motors to the limits of their ability, and at Hawk Performance, we're closer than ever to pushing the ABS Rev Limiter to its limits. High Performance Street 5.0 pads give your vehicle the greatest stopping power and pedal feel without compromising ABS. HPS 5.0 is a Ferro-Carbon compound that provides advanced braking characteristics to enhance the driving experience. This compound combines the safety and quality of aerospace design with the braking technology of motorsports. The results are shorter stopping distances, improved performance under heavy braking conditions, and street car friendly characteristics.\u003c\/p\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003e\u003cstrong\u003eSTREET USE ONLY\u003c\/strong\u003e\u003c\/li\u003e \t\u003cli\u003eAggressive torque\u003c\/li\u003e \t\u003cli\u003eGreat rotor \u0026amp; pad wear life\u003c\/li\u003e \t\u003cli\u003eSmooth \u0026amp; predictable control\u003c\/li\u003e \t\u003cli\u003eDesigned to deliver high deceleration rates\u003c\/li\u003e \t\u003cli\u003eConsistent brake release characteristics for a smooth braking feel\u003c\/li\u003e \t\u003cli\u003eAll Hawk Performance compounds are not compatible with carbon ceramic rotors. Hawk pads are designed to work with Iron\/Metal rotors.\u003c\/li\u003e \t\u003cli\u003e38 DegC-400 DegC operating temperatures\u003c\/li\u003e \t\u003cli\u003e38 DegC-290 DegC optimal temperature range\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eTo ensure correct compatibility we always recommend comparing your existing brake pads to the pad shape diagram provided above. Vehicle fitment provided is to be used as a guide only and may not suit your vehicle.\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003e1994-1998 Subaru WRX GC8\/GF8\u003c\/li\u003e \t\u003cli\u003e1994-1998 Subaru STI GC8\u003c\/li\u003e \t\u003cli\u003e1997-2002 Subaru Forester SF (Inc GT)\u003c\/li\u003e \t\u003cli\u003e1994-2000 Subaru Impreza GC\/GF\u003c\/li\u003e \t\u003cli\u003e1993-1998 Subaru Liberty BF\/BG\u003c\/li\u003e \t\u003cli\u003e1998-2003 Subaru Liberty BE\/BH\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImportant - Installation and Brake Bedding Procedure:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003e\u003cu\u003eSTREET\u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eStreet Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eTo break in the new components, make 6 to 10 stops from approximately 30 to 35 MPH\u003c\/li\u003e \t\u003cli\u003eapplying moderate pressure.\u003c\/li\u003e \t\u003cli\u003eMake an additional 2 to 3 hard stops from approximately 40 to 45 MPH.\u003c\/li\u003e \t\u003cli\u003eDO NOT DRAG BRAKES!\u003c\/li\u003e \t\u003cli\u003eAllow 15 minutes for brake system to cool down.\u003c\/li\u003e \t\u003cli\u003eYour brakes are now ready for use and can be driven normally.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cu\u003eMOTORSPORTS \u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad\u003cbr role=\"presentation\"\u003e installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure :\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eMotorsports Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e \t\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e \t\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e \t\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e \t\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003cbr role=\"presentation\"\u003e \u003cu\u003eIMPORTANT REMINDERS WHEN BURNISHING\/BEDDING BRAKE PADS:\u003c\/u\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e \t\u003cli\u003eDo not drag brakes while car is moving during break?in procedure.\u003c\/li\u003e \t\u003cli\u003eDo not engage pedal while car is stopped at any time following the break?in procedure.\u003c\/li\u003e \t\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e \t\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e \t\u003cli\u003eClean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads.\u003c\/li\u003e \t\u003cli\u003eSome forms of racing don’t allow time for the proper break?in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible\u003c\/li\u003e \u003c\/ul\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Hawk-Performance-HPS-5.0-Front-Brake-Pads-Subaru-WRX\/STI-94-98\/Impreza-94-00\/Forester-97-02-HB352B\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e","brand":"Hawk Performance","offers":[{"title":"Default Title","offer_id":49433041502511,"sku":"HB352B.665","price":224.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/3903\/9279\/files\/HB352B.665.jpg?v=1714107654"},{"product_id":"hawk-performance-hp-front-brake-pads-honda-s2000-c","title":"Hawk Performance HP+ Front Brake Pads","description":"\u003cp\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/hawk-performance-hp-front-brake-pads-honda-s2000-c\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003c\/p\u003e  \u003cp\u003eHP Plus utilizes a unique Ferro-Carbon, high-tech friction material that was developed and manufactured for sport driving in autocross, Solo II and Ã’track dayÓ applications. The Ferro-Carbon formulation offers lower wear rates and higher torque values than other competitive materials.\u003c\/p\u003e  \u003cp\u003eExtremely high coefficient of friction makes HP Plus the perfect upgrade over stock for high performance streetcars used in autocross competition or that experience repetitive, heavy braking.\u003c\/p\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eLow to mid temperature range\u003c\/li\u003e \t\u003cli\u003eFade resistant\u003c\/li\u003e \t\u003cli\u003eSmooth \u0026amp; predictable torque\u003c\/li\u003e \t\u003cli\u003eIdeal for Autocross \u0026amp; club racing events\u003c\/li\u003e \t\u003cli\u003eAll Hawk Performance compounds are not compatible with carbon ceramic rotors. Hawk pads are designed to work with Iron\/Metal rotors.\u003c\/li\u003e \t\u003cli\u003eLow torque\u003c\/li\u003e \t\u003cli\u003e38 Deg C-425 Deg C operating temperatures\u003c\/li\u003e \t\u003cli\u003e149 Deg C-315 Deg C optimal temperature range\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eTo ensure correct compatibility we always recommend comparing your existing brake pads to the pad shape diagram provided above. Vehicle fitment provided is to be used as a guide only and may not suit your vehicle.\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003e1999-2009 Honda S2000 AP1\/AP2\u003c\/li\u003e \t\u003cli\u003e2001-2005 Honda Civic Type-R EP3\u003c\/li\u003e \t\u003cli\u003e2001-2005 Honda Civic ES\/EU\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eImportant - Installation and Brake Bedding Procedure:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003e\u003cu\u003eSTREET\u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eStreet Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eTo break in the new components, make 6 to 10 stops from approximately 30 to 35 MPH\u003c\/li\u003e \t\u003cli\u003eapplying moderate pressure.\u003c\/li\u003e \t\u003cli\u003eMake an additional 2 to 3 hard stops from approximately 40 to 45 MPH.\u003c\/li\u003e \t\u003cli\u003eDO NOT DRAG BRAKES!\u003c\/li\u003e \t\u003cli\u003eAllow 15 minutes for brake system to cool down.\u003c\/li\u003e \t\u003cli\u003eYour brakes are now ready for use and can be driven normally.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cu\u003eMOTORSPORTS \u003c\/u\u003e\u003c\/p\u003e  \u003cp\u003eInstallation instructions should be followed in accordance with the application?specific brake pad\u003cbr role=\"presentation\"\u003e installation instructions provided by the vehicle manufacturer.\u003c\/p\u003e  \u003cp\u003eBrake Pad Installation Procedure :\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eInstall brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \t\u003cli\u003eCheck Brake Fluid. Flush and replace, as needed.\u003c\/li\u003e \t\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \t\u003cli\u003eCheck rotor for deep grooves or scoring. Resurface or replace rotor, as needed.\u003c\/li\u003e \t\u003cli\u003eIf rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.\u003c\/li\u003e \t\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eMotorsports Brake Pad Burnishing\/Bedding?In Instructions:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e \t\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e \t\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e \t\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e \t\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003cbr role=\"presentation\"\u003e \u003cu\u003eIMPORTANT REMINDERS WHEN BURNISHING\/BEDDING BRAKE PADS:\u003c\/u\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e \t\u003cli\u003eDo not drag brakes while car is moving during break?in procedure.\u003c\/li\u003e \t\u003cli\u003eDo not engage pedal while car is stopped at any time following the break?in procedure.\u003c\/li\u003e \t\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e \t\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e \t\u003cli\u003eClean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads.\u003c\/li\u003e \t\u003cli\u003eSome forms of racing don’t allow time for the proper break?in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/hawk-performance-hp-front-brake-pads-honda-s2000-c\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003c\/p\u003e","brand":"Hawk Performance","offers":[{"title":"Default Title","offer_id":49433041666351,"sku":"HB361N.622","price":259.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/3903\/9279\/files\/HB361N.622.jpg?v=1714107655"}],"url":"https:\/\/www.prospeedracing.com.au\/collections\/hawk-in-stock.oembed","provider":"Pro Speed Racing","version":"1.0","type":"link"}