{"title":"Male AN Flare Press Valve Cover Press In Fittings","description":null,"products":[{"product_id":"10an-male-bung-aluminum","title":"Radium 10AN Male Bung, Aluminum","description":"\u003ca href=\"https:\/\/www.prospeedracing.com.au\/10an-male-bung-aluminum\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003cdiv class=\"innerSection\"\u003e \u003cdiv class=\"header\"\u003e \u003ch2\u003eDescription \u003c\/h2\u003e \u003c\/div\u003e  \u003cdiv class=\"content\"\u003e \u003cdiv class=\"descriptionWrapper\" itemprop=\"description\"\u003e \u003cp\u003eBoth aluminum and steel bungs feature 10AN male (7\/8-14) threads and have a large 12.4mm (1\/2\") internal diameter for optimal flow.\u003cbr\u003e \u003cbr\u003e \u003ca href=\"http:\/\/data.radiumauto.com\/PublicDocs\/19-0113.PDF\" target=\"_blank\"\u003eClick HERE to download the 14-0274 installation instructions (PDF).\u003c\/a\u003e\u003cbr\u003e The 14-0274 aluminum fitting can be used as a weld-in or press-in fitting (specifically for the USDM Mitsubishi EVO 8-9 magnesium valve cover).\u003cbr\u003e The press-in portion is 16.6mm diameter. \u003cbr\u003e \u003cimg alt=\"\" height=\"400\" src=\"https:\/\/www.radiumauto.com\/Assets\/ProductImages\/14-0274_1.jpg?ts=021450\" width=\"600\"\u003e \u003cbr\u003e It replaces the PCV valve's bushing so installation does NOT require valve cover removal. The fitting has extremely close tolerances to make a tight fit. NOTE: The JDM EVO 4-9 valve cover uses a different PCV valve and is NOT compatible.\u003cbr\u003e \u003cimg alt=\"\" height=\"400\" src=\"https:\/\/www.radiumauto.com\/Assets\/ProductImages\/14-0274_3.jpg?ts=023126\" width=\"600\"\u003e \u003cbr\u003e \u003cbr\u003e The 14-0293 weld-on fitting (shown below) is made from steel and is commonly used on oil pans. To prevent rust, this raw (uncoated) fitting is soaked in oil.\u003cbr\u003e \u003cimg alt=\"\" height=\"400\" src=\"https:\/\/www.radiumauto.com\/Assets\/ProductImages\/RadiumProd-0277.jpg?ts=072304\" width=\"600\"\u003e \u003c\/p\u003e \u003c\/div\u003e  \u003cdiv class=\"customFieldsWrapper\"\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003ca href=\"https:\/\/www.prospeedracing.com.au\/10an-male-bung-aluminum\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":49345818657071,"sku":"14-0274","price":45.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/3903\/9279\/files\/14-0274.jpg?v=1713419293"},{"product_id":"radium-10an-male-press-fit-fitting-nissan-ka24de-intake-20-0810","title":"Radium 10AN Male Press-Fit Fitting","description":"\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Radium-10AN-Male-Press-Fit-Fitting-Nissan-KA24DE-Intake-20-0810\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003cp\u003eRadium Engineering low profile swivel fittings simply press-in. No drilling or welding required. This low profile 10AN fitting is a direct replacement for the valve cover barb found on the intake side of the Nissan KA24DE S13\/S14 valve cover. This fitting has a slight angle on the flange to match the casting draft angle on the KA24DE valve cover. When installing into the valve cover, the flat spot (shown in blue) should be facing upwards.\u003c\/p\u003e \u003ca href=\"https:\/\/www.prospeedracing.com.au\/Radium-10AN-Male-Press-Fit-Fitting-Nissan-KA24DE-Intake-20-0810\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":49345818689839,"sku":"20-0810","price":109.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/3903\/9279\/files\/20-0810.jpg?v=1713419297"},{"product_id":"radium-10an-male-press-fit-fitting-nissan-s13-sr20det-exhaust-20-0811","title":"Radium 10AN Male Press-Fit Fitting","description":"\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Radium-10AN-Male-Press-Fit-Fitting-Nissan-S13-SR20DET-Exhaust-20-0811\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003cp\u003eRadium Engineering low profile swivel fittings simply press-in. No drilling or welding required.\u003c\/p\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003eThis low profile double ended 10AN banjo fitting is a direct replacement for the valve cover barbs found on the exhaust side of the Nissan SR20DET S13 valve cover.\u003c\/p\u003e \u003ca href=\"https:\/\/www.prospeedracing.com.au\/Radium-10AN-Male-Press-Fit-Fitting-Nissan-S13-SR20DET-Exhaust-20-0811\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":49345818755375,"sku":"20-0811","price":109.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/3903\/9279\/files\/20-0811.jpg?v=1713419295"},{"product_id":"radium-10an-male-press-fit-fitting-nissan-silvia-200sx-s14-s15-exhaust-20-0812","title":"Radium 10AN Male Press-Fit Fitting","description":"\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Radium-10AN-Male-Press-Fit-Fitting-Nissan-Silvia\/200SX-S14\/S15-Exhaust-20-0812\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003cp\u003eRadium Engineering low profile swivel fittings simply press-in. No drilling or welding required. This low profile double ended 10AN banjo fitting is a direct replacement for the valve cover barbs found on the exhaust side of the Nissan SR20DET S14\/S15 valve cover.\u003c\/p\u003e \u003ca href=\"https:\/\/www.prospeedracing.com.au\/Radium-10AN-Male-Press-Fit-Fitting-Nissan-Silvia\/200SX-S14\/S15-Exhaust-20-0812\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":49345818788143,"sku":"20-0812","price":109.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/3903\/9279\/files\/20-0812.jpg?v=1713419295"},{"product_id":"radium-10an-male-press-in-valve-cover-fitting-honda-civic-integra-accord-k-series-20-0909","title":"Radium 10AN Male Press-In Valve Cover Fitting","description":"\u003cp\u003eRadium Engineering 10AN low profile swivel fittings simply press-in. No drilling or welding required.\u003c\/p\u003e  \u003cp\u003eThere are multiple valve covers for Honda K-series. They are all interchangeable. However, these Radium Engineering press-in fittings are NOT compatible with the earlier valve cover which do NOT have an OEM press-in fitting.\u003c\/p\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eStainless\/Aluminum Construction\u003c\/li\u003e \t\u003cli\u003eLow Profile 10AN Male Fitting\u003c\/li\u003e \t\u003cli\u003eAnodized and Laser Engraved\u003c\/li\u003e \t\u003cli\u003eSwivel Action with FKM O-Rings\u003c\/li\u003e \t\u003cli\u003eSimple Press-Fit Installation\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eCOMPATIBLE VALVE COVERS:\u003c\/strong\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eK20A6\u003c\/li\u003e \t\u003cli\u003eK20A7\u003c\/li\u003e \t\u003cli\u003eK20Z2\u003c\/li\u003e \t\u003cli\u003eK20Z3\u003c\/li\u003e \t\u003cli\u003eK20Z4\u003c\/li\u003e \t\u003cli\u003eK24A\u003c\/li\u003e \t\u003cli\u003eK24A2 (06-08)\u003c\/li\u003e \t\u003cli\u003eK24A3\u003c\/li\u003e \t\u003cli\u003ek24A4\u003c\/li\u003e \t\u003cli\u003eK24A8\u003c\/li\u003e \t\u003cli\u003ek24Z1\u003c\/li\u003e \t\u003cli\u003ek24Z2\u003c\/li\u003e \t\u003cli\u003ek24Z3\u003c\/li\u003e \t\u003cli\u003ek24Z4\u003c\/li\u003e \t\u003cli\u003ek24Z5\u003c\/li\u003e \t\u003cli\u003ek24Z6\u003c\/li\u003e \t\u003cli\u003ek24Z7\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eNON COMPATIBLE VALVE COVERS:\u003c\/strong\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eK20A\u003c\/li\u003e \t\u003cli\u003eK20A1\u003c\/li\u003e \t\u003cli\u003eK20A2\u003c\/li\u003e \t\u003cli\u003eK20A3\u003c\/li\u003e \t\u003cli\u003eK20A4\u003c\/li\u003e \t\u003cli\u003eK20A9\u003c\/li\u003e \t\u003cli\u003eK20B\u003c\/li\u003e \t\u003cli\u003eK20Z1\u003c\/li\u003e \t\u003cli\u003eK23A1\u003c\/li\u003e \t\u003cli\u003eK24A1\u003c\/li\u003e \t\u003cli\u003eK24A2 (04-05)\u003cbr\u003e \t \u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":49345818820911,"sku":"20-0909","price":109.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/3903\/9279\/files\/20-0909.jpg?v=1713419299"},{"product_id":"radium-10an-male-press-in-valve-cover-fittings-nissan-engines-20-0808","title":"Radium 10AN Male Press-In Valve Cover Fittings","description":"\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Radium-10AN-Male-Press-In-Valve-Cover-Fittings-Nissan-Engines-20-0808\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003cp\u003eRadium Engineering low profile swivel fittings simply press-in. No drilling or welding required.\u003c\/p\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eStainless\/Aluminum Construction\u003c\/li\u003e \t\u003cli\u003eLow Profile 10AN Male Fitting\u003c\/li\u003e \t\u003cli\u003eAnodized and Laser Engraved\u003c\/li\u003e \t\u003cli\u003eSwivel Action with Viton O-Rings\u003c\/li\u003e \t\u003cli\u003eSimple Press-Fit Installation\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003eThis fitting is a direct replacement for the PCV valve for the following:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eNissan Skyline RB25DET\u003c\/li\u003e \t\u003cli\u003eNissan Skyline RB25DET NEO\u003c\/li\u003e \t\u003cli\u003eNissan Silvia SR20DET (S14 and S15 Only)\u003c\/li\u003e \t\u003cli\u003eNissan Silvia Primera SR20DE (S14, S15, P11 Only)\u003c\/li\u003e \t\u003cli\u003eNissan Bluebird Primera Wingroad SR20VE\u003c\/li\u003e \t\u003cli\u003eNissan X-Trail SR20VET\u003c\/li\u003e \t\u003cli\u003eNisssan GT-R VR38DETT (07-08 Only)\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eNOTE: \u003c\/strong\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003e20-0808 will work in many Nissan\/Infiniti models, some are listed below. If the PCV valve is mounted with rubber grommet P\/N: 11812-41B00 (shown above), than Radium P\/N: 20-0808 will work. For CCV Valve, see Radium # 20-0813\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003eBelow is a list of other compatible Nissan engines:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eCG10DE\u003c\/li\u003e \t\u003cli\u003eCG13DE\u003c\/li\u003e \t\u003cli\u003eCGA3DE\u003c\/li\u003e \t\u003cli\u003eCR12DE\u003c\/li\u003e \t\u003cli\u003eCR14DE\u003c\/li\u003e \t\u003cli\u003eGA15DE\u003c\/li\u003e \t\u003cli\u003eGA16DE\u003c\/li\u003e \t\u003cli\u003eHR12DDR\u003c\/li\u003e \t\u003cli\u003eHR12DE\u003c\/li\u003e \t\u003cli\u003eHR15DE\u003c\/li\u003e \t\u003cli\u003eHR16DE\u003c\/li\u003e \t\u003cli\u003eKA24DE (99-01 Bassara Only)\u003c\/li\u003e \t\u003cli\u003eQG13DE\u003c\/li\u003e \t\u003cli\u003eQG15DE\u003c\/li\u003e \t\u003cli\u003eQG18DD\u003c\/li\u003e \t\u003cli\u003eQG18DE\u003c\/li\u003e \t\u003cli\u003eRB20DE\u003c\/li\u003e \t\u003cli\u003eRB25DE\u003c\/li\u003e \t\u003cli\u003eRB25DET\u003c\/li\u003e \t\u003cli\u003eSR16VE\u003c\/li\u003e \t\u003cli\u003eSR18DE\u003c\/li\u003e \t\u003cli\u003eSR20DE (S14, S15, P11, N30 Only)\u003c\/li\u003e \t\u003cli\u003eSR20DET (S14 and S15 Only)\u003c\/li\u003e \t\u003cli\u003eSR20VE\u003c\/li\u003e \t\u003cli\u003eSR20VET\u003c\/li\u003e \t\u003cli\u003eTB48DE\u003c\/li\u003e \t\u003cli\u003eVQ20DE\u003c\/li\u003e \t\u003cli\u003eVQ30DE\u003c\/li\u003e \t\u003cli\u003eVQ30DET\u003c\/li\u003e \t\u003cli\u003eVR38DETT (07-08 Only, Mounted to Separator)\u003c\/li\u003e \u003c\/ul\u003e \u003ca href=\"https:\/\/www.prospeedracing.com.au\/Radium-10AN-Male-Press-In-Valve-Cover-Fittings-Nissan-Engines-20-0808\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":49345818853679,"sku":"20-0808","price":109.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/3903\/9279\/files\/20-0808.jpg?v=1713419298"},{"product_id":"radium-10an-male-press-in-valve-cover-fittings-nissan-rb25det-crankcase-20-0813","title":"Radium 10AN Male Press-In Valve Cover Fittings","description":"\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Radium-10AN-Male-Press-In-Valve-Cover-Fittings-Nissan-RB25DET-Crankcase-20-0813\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003cp\u003eRadium Engineering low profile swivel fittings simply press-in. No drilling or welding required.\u003c\/p\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eStainless\/Aluminum Construction\u003c\/li\u003e \t\u003cli\u003eLow Profile 10AN Male Fitting\u003c\/li\u003e \t\u003cli\u003eAnodized and Laser Engraved\u003c\/li\u003e \t\u003cli\u003eSwivel Action with Viton O-Rings\u003c\/li\u003e \t\u003cli\u003eSimple Press-Fit Installation\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003eThis low profile 10AN banjo fitting is a direct replacement for the intake and exhaust crankcase fittings found on all Nissan RB25DET valve covers (non VVT-i and VVT-i). These ports are located on top of the valve covers towards the front. NOTE: To replace the PCV valve that connects on the side of the RB25DET intake valve cover, use 20-0808.\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eNOTE: \u003c\/strong\u003eThere is one on the intake valve cover and one on the exhaust valve cover. If replacing both OEM fittings, quantity 2 must be purchased.\u003c\/p\u003e \u003ca href=\"https:\/\/www.prospeedracing.com.au\/Radium-10AN-Male-Press-In-Valve-Cover-Fittings-Nissan-RB25DET-Crankcase-20-0813\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":49345818886447,"sku":"20-0813","price":109.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/3903\/9279\/files\/20-0813.jpg?v=1713419296"},{"product_id":"radium-10an-male-swivel-banjo-11-8mm-press-fit-fitting-toyota-1jz-vvti-20-0509","title":"Radium 10AN Male Swivel Banjo 11.8MM Press Fit Fitting","description":"\u003cp\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Radium-10AN-Male-Swivel-Banjo-11.8MM-Press-Fit-Fitting-Toyota-1JZ-VVTi-20-0509\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003c\/p\u003e  \u003cp\u003eRadium Engineering 10AN low profile swivel fittings simply press-in. No drilling or welding required.\u003c\/p\u003e  \u003cp\u003e20-0509 Suits Toyota 1JZ VVti Exhaust Side. The 20-0509 low profile 11.8mm press-fit banjo fitting has a 12.0mm long snout.\u003c\/p\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eFEATURES:\u003c\/strong\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eStainless\/Aluminum Construction\u003c\/li\u003e \t\u003cli\u003eLow Profile 10AN Male Fitting\u003c\/li\u003e \t\u003cli\u003eAnodized and Laser Engraved\u003c\/li\u003e \t\u003cli\u003eSwivel Action with Viton O-Rings\u003c\/li\u003e \t\u003cli\u003eSimple Press-Fit Installation\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Radium-10AN-Male-Swivel-Banjo-11.8MM-Press-Fit-Fitting-Toyota-1JZ-VVTi-20-0509\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":49345818919215,"sku":"20-0509","price":109.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/3903\/9279\/files\/20-0509.jpg?v=1713419296"},{"product_id":"radium-10an-male-swivel-banjo-13-5mm-press-fit-fitting-toyota-2jz-exhaust-20-0409","title":"Radium 10AN Male Swivel Banjo 13.5mm Press Fit Fitting","description":"\u003cp\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Radium-10AN-Male-Swivel-Banjo-13.5mm-Press-Fit-Fitting-Toyota-2JZ-Exhaust-20-0409\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003c\/p\u003e  \u003cp\u003eRadium Engineering 10AN low profile swivel fittings simply press-in. No drilling or welding required. The 20-0409 low profile 13.5mm press-fit banjo fitting has a 19.1mm long snout.\u003c\/p\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eStainless\/Aluminum Construction\u003c\/li\u003e \t\u003cli\u003eLow Profile 10AN Male Fitting\u003c\/li\u003e \t\u003cli\u003eAnodized and Laser Engraved\u003c\/li\u003e \t\u003cli\u003eSwivel Action with Viton O-Rings\u003c\/li\u003e \t\u003cli\u003eSimple Press-Fit Installation\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003eRefer to the table above for fitment information with popular Toyota engines. If an engine is not listed, then we do not have fitment information for it.\u003c\/p\u003e  \u003cp\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Radium-10AN-Male-Swivel-Banjo-13.5mm-Press-Fit-Fitting-Toyota-2JZ-Exhaust-20-0409\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":49345818984751,"sku":"20-0409","price":109.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/3903\/9279\/files\/20-0409.jpg?v=1713419298"},{"product_id":"radium-10an-male-swivel-banjo-18-0mm-press-fit-fitting-toyota-1jz-2jz-20-0408","title":"Radium 10AN Male Swivel Banjo 18.0mm Press Fit Fitting - Toyota 1JZ\/2JZ Intake","description":"\u003cp\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Radium-10AN-Male-Swivel-Banjo-18.0mm-Press-Fit-Fitting-Toyota-1JZ\/2JZ-20-0408\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003c\/p\u003e  \u003cp\u003eRadium Engineering 10AN low profile swivel fittings simply press-in. No drilling or welding required. The 20-0408 low profile 18.1mm press-fit banjo fitting has a 9.3mm long snout.\u003c\/p\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eStainless\/Aluminum Construction\u003c\/li\u003e \t\u003cli\u003eLow Profile 10AN Male Fitting\u003c\/li\u003e \t\u003cli\u003eAnodized and Laser Engraved\u003c\/li\u003e \t\u003cli\u003eSwivel Action with Viton O-Rings\u003c\/li\u003e \t\u003cli\u003eSimple Press-Fit Installation\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e20-0408 will work in many Toyota\/Lexus models, some are listed below. If the PCV valve is mounted to the valve cover with rubber grommet 90480-18001 (shown above), then this press-in fitting will work.\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003e4RUNNER\u003c\/li\u003e \t\u003cli\u003eCAMRY\u003c\/li\u003e \t\u003cli\u003eCARINA 2\u003c\/li\u003e \t\u003cli\u003eCELICA\u003c\/li\u003e \t\u003cli\u003eCHASER (excluding 2JZ-GE VVT-i)\u003c\/li\u003e \t\u003cli\u003eCOASTER\u003c\/li\u003e \t\u003cli\u003eCOROLLA SPRINTER\u003c\/li\u003e \t\u003cli\u003eCORONA FR\u003c\/li\u003e \t\u003cli\u003eCRESSIDA\u003c\/li\u003e \t\u003cli\u003eCRESTA\u003c\/li\u003e \t\u003cli\u003eCROWN (excluding 2JZ-GE VVT-i)\u003c\/li\u003e \t\u003cli\u003eES300\u003c\/li\u003e \t\u003cli\u003eGS300 (excluding 2JZ-GE VVT-i)\u003c\/li\u003e \t\u003cli\u003eGS430\u003c\/li\u003e \t\u003cli\u003eHIACE S.B.V\u003c\/li\u003e \t\u003cli\u003eHILUX\u003c\/li\u003e \t\u003cli\u003eIS200\u003c\/li\u003e \t\u003cli\u003eLAND CRUISER\u003c\/li\u003e \t\u003cli\u003eLS400\u003c\/li\u003e \t\u003cli\u003eLS430\u003c\/li\u003e \t\u003cli\u003eLX470\u003c\/li\u003e \t\u003cli\u003eMARK 2 BLIT (excluding 2JZ-GE VVT-i)\u003c\/li\u003e \t\u003cli\u003eMODEL-F\u003c\/li\u003e \t\u003cli\u003eMR-2\u003c\/li\u003e \t\u003cli\u003eORIGIN (excluding 2JZ-GE VVT-i)\u003c\/li\u003e \t\u003cli\u003eSC430\u003c\/li\u003e \t\u003cli\u003eSEQUOIA\u003c\/li\u003e \t\u003cli\u003eSOARER (excluding 2JZ-GE VVT-i)\u003c\/li\u003e \t\u003cli\u003eSTARLET\u003c\/li\u003e \t\u003cli\u003eSUPRA\u003c\/li\u003e \t\u003cli\u003eT100\u003c\/li\u003e \t\u003cli\u003eTERCEL\u003c\/li\u003e \t\u003cli\u003eTOWNACE\u003c\/li\u003e \t\u003cli\u003eTUNDRA\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Radium-10AN-Male-Swivel-Banjo-18.0mm-Press-Fit-Fitting-Toyota-1JZ\/2JZ-20-0408\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":49345819017519,"sku":"20-0408","price":109.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/3903\/9279\/files\/20-0408.jpg?v=1713419300"},{"product_id":"radium-10an-male-swivel-banjo-17-5mm-press-fit-toyota-1jz-non-vvti-exhaust-20-0609","title":"Radium 10AN Male Swivel Banjo 17.5mm Press Fit","description":"\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Radium-10AN-Male-Swivel-Banjo-17.5mm-Press-Fit-Toyota-1JZ-Non-VVTi-Exhaust-20-0609\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003cp\u003eRadium Engineering 10AN low profile swivel fittings simply press-in. No drilling or welding required.\u003c\/p\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eStainless\/Aluminum Construction\u003c\/li\u003e \t\u003cli\u003eLow Profile 10AN Male Fitting\u003c\/li\u003e \t\u003cli\u003eAnodized and Laser Engraved\u003c\/li\u003e \t\u003cli\u003eSwivel Action with Viton O-Rings\u003c\/li\u003e \t\u003cli\u003eSimple Press-Fit Installation\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003eRefer to the table above for fitment information with popular Toyota engines. If an engine is not listed, fitment information has never been confirmed.\u003c\/p\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003eThe 20-0609 low profile 17.5mm press-fit banjo fitting has a 13.6mm long snout. This fitting is a direct replacement for the crankcase vent press-in located on the exhaust side valve cover for the following engine:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eToyota 1JZ-GTE Non VVT-i\u003c\/li\u003e \u003c\/ul\u003e \u003ca href=\"https:\/\/www.prospeedracing.com.au\/Radium-10AN-Male-Swivel-Banjo-17.5mm-Press-Fit-Toyota-1JZ-Non-VVTi-Exhaust-20-0609\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":49345819050287,"sku":"20-0609","price":109.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/3903\/9279\/files\/20-0609.jpg?v=1713419300"},{"product_id":"radium-12an-male-press-in-valve-cover-fittings-nissan-rb26dett-20-0809","title":"Radium 12AN Male Press-In Valve Cover Fittings","description":"\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Radium-12AN-Male-Press-In-Valve-Cover-Fittings-Nissan-RB26DETT-20-0809\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003cp\u003eThis low profile 12AN fitting is a direct replacement for Nissan RB26DETT valve cover fittings. NOTE: There is one on the intake valve cover and one on the exhaust valve cover. If replacing both OEM fittings, quantity 2 must be purchased.\u003c\/p\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eStainless\/Aluminum Construction\u003c\/li\u003e \t\u003cli\u003eLow Profile 12AN Male Fitting\u003c\/li\u003e \t\u003cli\u003eAnodized and Laser Engraved\u003c\/li\u003e \t\u003cli\u003eSwivel Action with Viton O-Rings\u003c\/li\u003e \t\u003cli\u003eSimple Press-Fit Installation\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003eThis fitting is a direct replacement for the valve cover fittings for the following:\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eNissan Skyline R32 GTR (RB26DETT)\u003c\/li\u003e \t\u003cli\u003eNissan Skyline R33 GTR (RB26DETT)\u003c\/li\u003e \t\u003cli\u003eNissan Skyline R34 GTR (RB26DETT)\u003c\/li\u003e \u003c\/ul\u003e \u003ca href=\"https:\/\/www.prospeedracing.com.au\/Radium-12AN-Male-Press-In-Valve-Cover-Fittings-Nissan-RB26DETT-20-0809\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":49345819246895,"sku":"20-0809","price":109.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/3903\/9279\/files\/20-0809.jpg?v=1713419302"},{"product_id":"radium-sae-male-double-banjo-press-fit-nissan-skyline-gt-r-r32-r33-r34-rb26-20-0739","title":"Radium SAE Male Double Banjo Press-Fit","description":"\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Radium-SAE-Male-Double-Banjo-Press-Fit-Nissan-Skyline-GT-R-R32-R33-R34-RB26-20-0739\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003cp\u003e Radium Engineering low profile swivel fittings simply press-in. No drilling or welding required.\u003c\/p\u003e  \u003cp\u003eThis double-ended 16mm SAE quick connect fitting is a direct replacement for Nissan RB26DETT valve cover fittings. These are perfect for balancing the intake and exhaust valve cover vent ports. Compatible with Radium Engineering SAE quick connect hose ends 14-0627 and 14-0628.\u003c\/p\u003e  \u003cp\u003e\u003cbr\u003e NOTE: There is one on the intake valve cover and one on the exhaust valve cover. If replacing both OEM fittings, quantity 2 must be purchased.\u003c\/p\u003e \u003ca href=\"https:\/\/www.prospeedracing.com.au\/Radium-SAE-Male-Double-Banjo-Press-Fit-Nissan-Skyline-GT-R-R32-R33-R34-RB26-20-0739\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":49345827307823,"sku":"20-0739","price":109.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/3903\/9279\/files\/20-0739.jpg?v=1713419375"},{"product_id":"raceworks-an-press-in-breather-adaptor-fitting-nissan-skyline-gt-r-r32-r33-r34-rb26-rwf-708-03bk","title":"Raceworks AN Press In Breather Adaptor Fitting","description":"\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Raceworks-AN-Press-In-Breather-Adaptor-Fitting-Nissan-Skyline-GT-R-R32,-R33,-R34-RB26-RWF-708-03BK\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003cp\u003eRaceworks breather fittings allow a neat and reliable way of adapting AN fittings and braided hose to the OEM valve cover breather vents. Simply remove the OEM barbed breather fitting and replace with this new Raceworks AN fitting. Confirm sizing with specifications below before purchasing.\u003c\/p\u003e  \u003cp\u003eAll Raceworks fittings and adapters are full flow, and alloy fittings are hardcoat anodised, and machined from high grade 6063-T6 billet aluminium.\u003c\/p\u003e  \u003cp\u003eAll Raceworks products come with a 2 year warranty.\u003c\/p\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eStyle: Press In\u003c\/li\u003e \t\u003cli\u003eDiameter: 21.3-21.8mm (tapered)\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eNissan Skyline GT-R R32 (RB26DETT)\u003c\/li\u003e \t\u003cli\u003eNissan Skyline GT-R R33 (RB26DETT)\u003c\/li\u003e \t\u003cli\u003eNissan Skyline GT-R R34 (RB26DETT)\u003c\/li\u003e \u003c\/ul\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Raceworks-AN-Press-In-Breather-Adaptor-Fitting-Nissan-Skyline-GT-R-R32,-R33,-R34-RB26-RWF-708-03BK\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e","brand":"Raceworks","offers":[{"title":"AN-10","offer_id":49766095126831,"sku":"RWF-708-10-03BK","price":17.99,"currency_code":"AUD","in_stock":true},{"title":"AN-12","offer_id":49766095159599,"sku":"RWF-708-12-03BK","price":19.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/3903\/9279\/files\/RWF-708-03BK.jpg?v=1716168485"},{"product_id":"raceworks-an-10-press-in-breather-adaptor-fitting-nissan-skyline-r32-r33-rb20-rb25-non-neo-rwf-708-10-01bk","title":"Raceworks AN-10 Press In Breather Adaptor Fitting","description":"\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Raceworks-AN-10-Press-In-Breather-Adaptor-Fitting-Nissan-Skyline-R32-R33-RB20-RB25-Non-Neo-RWF-708-10-01BK\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003cp\u003eRaceworks breather fittings allow a neat and reliable way of adapting AN fittings and braided hose to the OEM valve cover breather vents. Simply remove the OEM barbed breather fitting and replace with this new Raceworks AN fitting. Confirm sizing with specifications below before purchasing.\u003c\/p\u003e  \u003cp\u003eAll Raceworks fittings and adapters are full flow, and alloy fittings are hardcoat anodised, and machined from high grade 6063-T6 billet aluminium.\u003c\/p\u003e  \u003cp\u003eAll Raceworks products come with a 2 year warranty.\u003c\/p\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eStyle: Press In\u003c\/li\u003e \t\u003cli\u003eDiameter: 15.5mm-15.8mm (tapered)\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eNissan Skyline R32 Inc GTS\/GTS-4\/GTS-T (RB20DET)\u003c\/li\u003e \t\u003cli\u003eNissan Skyline R33 Inc GTS\/GTS-T (RB25DET)\u003c\/li\u003e \u003c\/ul\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Raceworks-AN-10-Press-In-Breather-Adaptor-Fitting-Nissan-Skyline-R32-R33-RB20-RB25-Non-Neo-RWF-708-10-01BK\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e","brand":"Raceworks","offers":[{"title":"Default Title","offer_id":49766190317871,"sku":"RWF-708-10-01BK","price":17.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/3903\/9279\/files\/RWF-708-10-01BK.jpg?v=1716168783"},{"product_id":"raceworks-an-8-press-in-breather-adaptor-fitting-ford-falcon-xr6-ba-fg-front-rwf-708-08fbk","title":"Raceworks AN-8 Press In Breather Adaptor Fitting","description":"\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Raceworks-AN-8-Press-In-Breather-Adaptor-Fitting-Ford-Falcon-XR6-BA-FG-Front-RWF-708-08FBK\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003cp\u003eRaceworks breather fittings allow a neat and reliable way of adapting AN fittings and braided hose to the OEM valve cover breather vents. Simply remove the OEM barbed breather fitting and replace with this new Raceworks AN fitting. Confirm sizing with specifications below before purchasing.\u003c\/p\u003e  \u003cp\u003eAll Raceworks fittings and adapters are full flow, and alloy fittings are hardcoat anodised, and machined from high grade 6063-T6 billet aluminium.\u003c\/p\u003e  \u003cp\u003eAll Raceworks products come with a 2 year warranty.\u003c\/p\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eStyle: Press In\u003c\/li\u003e \t\u003cli\u003eDiameter: 20.5mm\u003c\/li\u003e \t\u003cli\u003eBreather Location: Front\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eFord Falcon XR6\/XR6 Turbo BA\/BF\u003c\/li\u003e \t\u003cli\u003eFord Falcon XR6\/XR6 Turbo FG\/FGX\u003c\/li\u003e \t\u003cli\u003eFord FPV F6 BA\/BF\u003c\/li\u003e \t\u003cli\u003eFord FPV F6 FG\/FGX\u003c\/li\u003e \u003c\/ul\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Raceworks-AN-8-Press-In-Breather-Adaptor-Fitting-Ford-Falcon-XR6-BA-FG-Front-RWF-708-08FBK\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e","brand":"Raceworks","offers":[{"title":"Default Title","offer_id":49766190350639,"sku":"RWF-708-08FBK","price":17.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/3903\/9279\/files\/RWF-708-08FBK.jpg?v=1716168783"},{"product_id":"raceworks-an-8-press-in-breather-adaptor-fitting-ford-falcon-xr6-ba-fg-rear-rwf-708-08rbk","title":"Raceworks AN-8 Press In Breather Adaptor Fitting - Ford Falcon XR6 BA-FG (Rear)","description":"\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Raceworks-AN-8-Press-In-Breather-Adaptor-Fitting-Ford-Falcon-XR6-BA-FG-Rear-RWF-708-08RBK\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003cp\u003eRaceworks breather fittings allow a neat and reliable way of adapting AN fittings and braided hose to the OEM valve cover breather vents. Simply remove the OEM barbed breather fitting and replace with this new Raceworks AN fitting. Confirm sizing with specifications below before purchasing.\u003c\/p\u003e  \u003cp\u003eAll Raceworks fittings and adapters are full flow, and alloy fittings are hardcoat anodised, and machined from high grade 6063-T6 billet aluminium.\u003c\/p\u003e  \u003cp\u003eAll Raceworks products come with a 2 year warranty.\u003c\/p\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eStyle: Press In\u003c\/li\u003e \t\u003cli\u003eDiameter: 20.5mm\u003c\/li\u003e \t\u003cli\u003eBreather Location: Rear\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eFord Falcon XR6\/XR6 Turbo BA\/BF\u003c\/li\u003e \t\u003cli\u003eFord Falcon XR6\/XR6 Turbo FG\/FGX\u003c\/li\u003e \t\u003cli\u003eFord FPV F6 BA\/BF\u003c\/li\u003e \t\u003cli\u003eFord FPV F6 FG\/FGX\u003c\/li\u003e \u003c\/ul\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Raceworks-AN-8-Press-In-Breather-Adaptor-Fitting-Ford-Falcon-XR6-BA-FG-Rear-RWF-708-08RBK\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e","brand":"Raceworks","offers":[{"title":"Default Title","offer_id":49766190448943,"sku":"RWF-708-08RBK","price":17.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/3903\/9279\/files\/RWF-708-08RBK.jpg?v=1716168783"},{"product_id":"raceworks-an-10-press-in-breather-adaptor-fitting-nissan-silvia-180sx-s13-200sx-s14-s15-skyline-r34-sr20-rb25-neo-rwf-708-10-02bk","title":"Raceworks AN-10 Press In Breather Adaptor Fitting","description":"\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Raceworks-AN-10-Press-In-Breather-Adaptor-Fitting-Nissan-Silvia,-180SX-S13-200SX-S14,-S15-Skyline-R34-SR20-RB25-Neo-RWF-708-10-02BK\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003cp\u003eRaceworks breather fittings allow a neat and reliable way of adapting AN fittings and braided hose to the OEM valve cover breather vents. Simply remove the OEM barbed breather fitting and replace with this new Raceworks AN fitting. Confirm sizing with specifications below before purchasing.\u003c\/p\u003e  \u003cp\u003eAll Raceworks fittings and adapters are full flow, and alloy fittings are hardcoat anodised, and machined from high grade 6063-T6 billet aluminium.\u003c\/p\u003e  \u003cp\u003eAll Raceworks products come with a 2 year warranty.\u003c\/p\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eStyle: Press In\u003c\/li\u003e \t\u003cli\u003eDiameter: 15.9mm-16.2mm (tapered)\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eNissan Silvia\/180SX S13 (SR20DET)\u003c\/li\u003e \t\u003cli\u003eNissan 200SX S14 (SR20DET)\u003c\/li\u003e \t\u003cli\u003eNissan 200SX S15 (SR20DET)\u003c\/li\u003e \t\u003cli\u003eNissan Skyline R34 GT-T (RB25DET Neo)\u003c\/li\u003e \u003c\/ul\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Raceworks-AN-10-Press-In-Breather-Adaptor-Fitting-Nissan-Silvia,-180SX-S13-200SX-S14,-S15-Skyline-R34-SR20-RB25-Neo-RWF-708-10-02BK\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e","brand":"Raceworks","offers":[{"title":"Default Title","offer_id":49766190481711,"sku":"RWF-708-10-02BK","price":17.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/3903\/9279\/files\/RWF-708-10-02BK.jpg?v=1716168785"},{"product_id":"raceworks-an-10-press-in-breather-adaptor-fitting-universal-1-rubber-grommet-rwf-708-10-50bk","title":"Raceworks AN-10 Press In Breather Adaptor Fitting - Universal 1\" Rubber Grommet","description":"\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Raceworks-AN-10-Press-In-Breather-Adaptor-Fitting-Universal-1-Rubber-Grommet-RWF-708-10-50BK\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003cp\u003eRaceworks breather fittings allow a neat and reliable way of adapting AN fittings and braided hose to the OEM valve cover breather vents. Simply remove the OEM barbed breather fitting and replace with this new Raceworks AN fitting. Confirm sizing with specifications below before purchasing.\u003c\/p\u003e  \u003cp\u003eAll Raceworks fittings and adapters are full flow, and alloy fittings are hardcoat anodised, and machined from high grade 6063-T6 billet aluminium.\u003c\/p\u003e  \u003cp\u003eAll Raceworks products come with a 2 year warranty.\u003c\/p\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eStyle: Press In\u003c\/li\u003e \t\u003cli\u003eDiameter: 25.4mm\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eUniversal - Suits 1\" Grommet\u003c\/li\u003e \u003c\/ul\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Raceworks-AN-10-Press-In-Breather-Adaptor-Fitting-Universal-1-Rubber-Grommet-RWF-708-10-50BK\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e","brand":"Raceworks","offers":[{"title":"Default Title","offer_id":49766190547247,"sku":"RWF-708-10-50BK","price":28.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/3903\/9279\/files\/RWF-708-10-50BK.jpg?v=1716168784"},{"product_id":"raceworks-an-10-screw-in-breather-adaptor-fitting-nissan-skyline-r31-holden-commodore-vl-rb30-rwf-708-10-m19bk","title":"Raceworks AN-10 Screw In Breather Adaptor Fitting","description":"\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Raceworks-AN-10-Screw-In-Breather-Adaptor-Fitting-Nissan-Skyline-R31-Holden-Commodore-VL-RB30-RWF-708-10-M19BK\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003cp\u003eRaceworks breather fittings allow a neat and reliable way of adapting AN fittings and braided hose to the OEM valve cover breather vents. Simply remove the OEM barbed breather fitting and replace with this new Raceworks AN fitting. Confirm sizing with specifications below before purchasing.\u003c\/p\u003e  \u003cp\u003eAll Raceworks fittings and adapters are full flow, and alloy fittings are hardcoat anodised, and machined from high grade 6063-T6 billet aluminium.\u003c\/p\u003e  \u003cp\u003eAll Raceworks products come with a 2 year warranty.\u003c\/p\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eStyle: Screw In\u003c\/li\u003e \t\u003cli\u003eDiameter: N\/A\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eHolden Commodore VL (RB30ET)\u003c\/li\u003e \t\u003cli\u003eNissan Skyline R31 (RB30ET)\u003c\/li\u003e \u003c\/ul\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Raceworks-AN-10-Screw-In-Breather-Adaptor-Fitting-Nissan-Skyline-R31-Holden-Commodore-VL-RB30-RWF-708-10-M19BK\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e","brand":"Raceworks","offers":[{"title":"Default Title","offer_id":49766190612783,"sku":"RWF-708-10-M19BK","price":17.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/3903\/9279\/files\/RWF-708-10-M19BK.jpg?v=1716168784"},{"product_id":"raceworks-low-profile-swivel-banjo-an-press-in-breather-adaptor-fitting-an-12-rwf-709-12-03bk","title":"Raceworks AN-12 Low Profile Banjo Breather Adaptor Suit RB26","description":"\u003cp\u003eRaceworks breather fittings allow a neat and reliable way of adapting AN fittings and braided hose to the OEM valve cover breather vents. Simply remove the OEM barbed breather fitting and replace with this new Raceworks AN fitting. Confirm sizing with specifications below before purchasing.\u003c\/p\u003e\n\u003cp\u003eAll Raceworks fittings and adapters are full flow, and alloy fittings are hardcoat anodised, and machined from high grade 6063-T6 billet aluminium.\u003c\/p\u003e\n\u003cp\u003eAll Raceworks products come with a 2 year warranty.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStyle: Press In\u003c\/li\u003e\n\u003cli\u003eDiameter: 21.3-21.8mm (tapered)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNissan Skyline GT-R R32 (RB26DETT)\u003c\/li\u003e\n\u003cli\u003eNissan Skyline GT-R R33 (RB26DETT)\u003c\/li\u003e\n\u003cli\u003eNissan Skyline GT-R R34 (RB26DETT)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Raceworks","offers":[{"title":"Default Title","offer_id":50888792998191,"sku":"RWF-709-12-03BK","price":90.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/3903\/9279\/files\/RWF-709-10-03BK_HR-300x242.jpg?v=1736737521"},{"product_id":"raceworks-an-10-low-profile-banjo-breather-adaptor-nissan-rb20-rb25-non-neo-rwf-709-10-01bk","title":"Raceworks AN-10 Low Profile Banjo Breather Adaptor","description":"\u003cp\u003eRaceworks breather fittings allow a neat and reliable way of adapting AN fittings and braided hose to the OEM valve cover breather vents. Simply remove the OEM barbed breather fitting and replace with this new Raceworks AN fitting. Confirm sizing with specifications below before purchasing.\u003c\/p\u003e\n\n\u003cp\u003eAll Raceworks fittings and adapters are full flow, and alloy fittings are hardcoat anodised, and machined from high grade 6063-T6 billet aluminium.\u003c\/p\u003e\n\n\u003cp\u003eAll Raceworks products come with a 2 year warranty.\u003c\/p\u003e\n","brand":"Raceworks","offers":[{"title":"Default Title","offer_id":51846020956463,"sku":"RWF-709-10-01BK","price":90.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/3903\/9279\/files\/371997.jpg?v=1757386089"}],"url":"https:\/\/www.prospeedracing.com.au\/collections\/male-an-flare-press-valve-cover-press-in-fittings.oembed","provider":"Pro Speed Racing","version":"1.0","type":"link"}