{"product_id":"mca-pro-drift-coilovers-mazda-mx5-nc","title":"MCA Pro Drift Coilovers","description":"\u003cp\u003eWith MCA Suspension’s own director being a highly experienced and a successful competitor in national and international drift events including Drift Australia and D1NZ, we have a long history of designing suspension products and setups for drift applications from entry-level, right through to winning national championships.\u003c\/p\u003e  \u003cp\u003eWe’ve also worked with many other top-level, well-known drivers from Australia and New Zealand. It was decided to take this experience and success and put it into a product specifically designed for drifting. The end result is our new Pro Drift suspension product, with unique valving derived from our Fusion 3.0 Valving technology, that’s versatile enough to provide a wide range of grip\/traction levels to suit various levels of drift cars and competitors.\u003c\/p\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eDRIFT SPEC VALVING\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eThis product features unique valving, developed by MCA Suspension to help increase control and stability during high speed transitions whilst also providing enough versatility to help dial in your desired level or rear traction.\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eRUGGED SPEC\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eTaking Bamber Spec to the next level, Rugged Spec literally doubles down by overhauling the major sealing component designs to build in sealing redundancy. Essentially this means all of the sealing points inside the dampers now have a backup. This is a relatively new design concept but we’re confident it will take the reliability and durability of MCA Suspension products to a whole new level.\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eDAMPER ADJUSTMENT\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eOur dampers come with 12 clicks of damper adjustment between hard and soft settings. Each click is quite powerful and very noticeable. The way the damper adjuster works, is it controls the flow of an amount of oil that bypasses the valving system. Closing (setting harder) the adjuster restricts oil flow making the damper firmer and more controlled, while opening (setting softer) the adjuster allows the oil to flow easier which makes the damper softer and less controlled.\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eHEIGHT ADJUSTMENT\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eOur dampers come with height adjustment which controls the ride height of the vehicle. Contrary to most other products around this price point, MCA Suspension products use “Critical Length Technology rather than “base height adjustment” meaning that instead of using the bottom mount position to adjust the ride height, the spring seat position is adjusted instead. This is the same system as used on true, high end suspension products. MCA Suspension always builds as much height adjustment into our products as realistically possible, however the exact amount my vary vehicle to vehicle and product to product for a number of reasons.\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003e3 YEAR WARRANTY\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eMCA Suspension offers one of the best (if not the best) 2 year warranty around for suspension components. This warranty covers bushes, bearings, rubbers and seals. However we often cover more (this is decided on a case by case basis) as we strive to make sure that the experience our customers have when using our products is the best possible. One of the main areas we differ to our competitors is that we also go out of our way to help make sure that any warranty claims are handled in a speedy and extremely convenient manner.\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eASSEMBLED \u0026amp; DESIGNED IN AUSTRALIA\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eAll of our products are assembled in Australia by our highly trained team. All of our suspension setups have been designed in Australia by MCA Suspension. Unlike many of our competitors, no copied setups here. Even the large majority of individual components used in MCA Suspension products (including mounts, springs, internal sealing components, spring seats, shafts, etc) have been designed by MCA Suspension.\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eMONOTUBE DESIGN\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eGenerally speaking, regarding vehicle suspension, there are two types of dampers in the way that they operate internally. Monotube and Twin-Tube. Twin-Tubes often are cheaper alternatives and don't have the same potential as Monotubes (for example, most factory dampers and cheaper factory replacement dampers are twin-tubes). MCA Suspension only uses Monotube Suspension, as does all true high-end suspension brands. The monotube design offers better cooling for the internal oil and stops oil and gas mixing, both of which make the supension damper more consistent and longer lasting.\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eFUSION VALVING V3\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eCarrying on from the 2nd version of Fusion Valving, V3 offers increased comfort and a smoother ride with no reduction of outright performance potential. On top of this, damper adjustment range has also been refined to provide a much wider usable range of adjustment.\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eDYNO TUNED\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eYour suspension will be dyno tuned on our shock dyno prior to being sent to you. Dyno tuning guarantees consistency between each shock as well as confirming the valve pack will behave in accordance to your needs or requirements.\u003c\/p\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eFeatures Where Applicable:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eCAMBER ADJUSTMENT\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eWhere-ever possible, MCA Suspension always features camber adjustment. Camber leans the top of your tyre in and out. Generally speaking, for road use, the straighter your tyre is (vertically) the more even the tyre wear might be, but the performance will lack. Leaning the tyre in at the top for more negative camber might help with tyre and fender clearance, and will also help improve the steering feel and vehicle performance, but may hurt tyre wear. For assistance as to what wheel alignment settings to run, please visit the technical section on this website. Please note: how the camber adjustment is achieved if it’s at the front, rear or both ends of the car will vary.\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eHELPER SPRINGS\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eIn the large majority of cases MCA Suspension products feature Helper Springs. A “helper spring” is a light weight spring who’s job is to keep the main spring captive if a specific setup and ride height combination mean that when the vehicle is jacked up with wheels off the ground, the spring may be loose. Thanks to the Helper Spring, the main spring will be held up and seated even in these rare situations.\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eRUBBER TOP MOUNTS\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eIn most cases, except for MacPherson Struts, we will use our own design of rubber tops. These rubber top mounts offer the needed amount of flexibility while also offering stability and minimised extra movement. They are even used in our 1100rwhp, Red Series equipped Time Attack 86.\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eSEPARATED SYSTEM\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eIn some cases the factory design of spring and damper setup is to have them sitting separate from eachother. In these cases we will often keep using that basic layout and factory mountings.\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eCOILOVER DESIGN\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eThe true meaning of the word “coilover” is when a damper has a spring mounted around the outside of it. This is a common design of suspension for vehicles. In some cases we will be able to convert Separate Designs to a Coilover Design also.\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eNON-INVERTED STRUT\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eWhen a strut type of suspension setup is used by the factory, there is the option to replace it with an “inverted” type or “non-inverted” type. MCA Suspension has used both designs over the years, but for products like Red Series and below, we use our non-inverted design in the large majority of cases, even for motorsport applications. Even our 1100rwhp, downforce loaded Time Attack 86 has run them for years. For more information on these, please visit our technical section.\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eADJUSTER EXTENDERS\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eAdjuster Extenders help gain access to the damper adjuster knobs in situations where the adjuster knob is hidden behind metal, trim or is simply difficult to reach. These are a rubber coated flexible steel cable with machined anodised aluminium ends which attach to either the existing adjuster knob, or screw directly onto the top of the damper’s shaft depending on the design.\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eCAMBER WASHERS\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eCamber Washers originated on our Gold Series products, and are offered as an optional extra for some of our entry level products and come as default on our higher end products. However they are only for cars that feature Macpherson struts. They are used on the bottom mounts and offer superior control, reliability and adjustability. For more information please see our technical section.\u003c\/p\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eWhat's in the Box?:\u003c\/strong\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eComplete Suspension System\u003c\/li\u003e \t\u003cli\u003eHeight Adjustment Tools\u003c\/li\u003e \t\u003cli\u003eSetup Sheet\u003c\/li\u003e \t\u003cli\u003eInformation Sheets\u003c\/li\u003e \t\u003cli\u003eMCA Sticker\/s\u003c\/li\u003e \u003c\/ul\u003e","brand":"MCA Suspension","offers":[{"title":"Default Title","offer_id":48977241538863,"sku":"MCA-MAZMX5NC-PDRIFT","price":3490.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/3903\/9279\/files\/MCA-MAZMX5NC-PDRIFT.jpg?v=1711072424","url":"https:\/\/www.prospeedracing.com.au\/products\/mca-pro-drift-coilovers-mazda-mx5-nc","provider":"Pro Speed Racing","version":"1.0","type":"link"}