{"product_id":"radium-engineering-fuel-hanger-pumps-not-included-20-1010","title":"Radium Engineering Fuel Hanger Pumps Not Included","description":"\u003cp\u003eThis Radium Engineering fuel hanger replaces the stock fuel pump assembly. No cutting or modifying of the vehicle is required for installation. A second pump add-on option is available and sold separately. Plumbing kits are available to simplify the installation process and provide high flow fuel lines and fittings.\u003c\/p\u003e\n\u003cp\u003eIf 2 aftermarket pumps are required, the dual pump add-on listed below must also be purchased. Choosing the best fuel pump is based on the expected engine power output, fuel type (gasoline, E85, etc.), and fuel pressure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFITTINGS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe fuel pump outlet is tapped for 10AN ORB (7\/8\"-14) female threads on the top plate.\u003c\/li\u003e\n\u003cli\u003eThe included fuel pump outlet fitting is 8AN male.\u003c\/li\u003e\n\u003cli\u003eThe fuel return inlet is tapped for 8AN ORB (3\/4\"-16) female threads on the top plate.\u003c\/li\u003e\n\u003cli\u003eThe included fuel return inlet fitting is 6AN male.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll fittings are machined low enough to clear the surrounding area.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePREVENTING FUEL STARVATION\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSeveral mechanisms work together to move fuel into the integrated collector and keep it full at all times. This ensures the pump has adequate fuel available, even during aggressive driving. The internal pump is supplied with fuel from 3 different sources:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe consistent crossover fuel scavenged from the passive side of the fuel tank.\u003c\/li\u003e\n\u003cli\u003eThe constant low pressure returning fuel from the fuel pressure regulator.\u003c\/li\u003e\n\u003cli\u003eTwo 1-way fill valves on the bottom of the collector allow fuel in, but not out. Each  valve flows 355LPH keeping the collector as full as the current fuel tank level.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eELECTRICAL\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe custom designed stainless steel electrical studs easily handle the high current demand that compact multi-pin bulkhead connectors lack. These serviceable connections are hermetically sealed and impervious to all standard and exotic fuels. Non-conductive anodized aluminum acorn nuts are provided to prevent any accidental short circuiting. Furthermore, the in-tank wiring is insulated with high quality chemically resistant ETFE.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOMPATIBLE PUMPS\u003c\/strong\u003e\u003cbr\u003eThe information below lists fuel pumps that have been tested and are verified to fit the corresponding products. There may be other fuel pumps that are similar enough to fit, but have not been verified by Radium Engineering. Visit our technical article on comparable pumps HERE for more information.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAEM 50-1000\u003c\/li\u003e\n\u003cli\u003eAEM 50-1200\u003c\/li\u003e\n\u003cli\u003eWalbro GSS342\u003c\/li\u003e\n\u003cli\u003eWalbro F90000267\u003c\/li\u003e\n\u003cli\u003eWalbro F90000274\u003c\/li\u003e\n\u003cli\u003eWalbro F90000285\u003c\/li\u003e\n\u003cli\u003eWalbro F90000295(1)\u003c\/li\u003e\n\u003cli\u003eTi Automotive E5LM(1)\u003c\/li\u003e\n\u003cli\u003eDeatschwerks DW440(2)\u003c\/li\u003e\n\u003cli\u003eDeatschwerks DW810(2)\u003c\/li\u003e\n\u003cli\u003eProtec 11928(2)\u003c\/li\u003e\n\u003cli\u003eFuelab 49614(2)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e(1)These pumps do not feature an integrated check valve. Provided in this kit is a high flow check valve that secures to the outlet of these specific pumps.\u003cbr\u003e(2)These pumps have a 41-43mm outer body diameter and require the purchase of the optional 20-0441 Pump Clamp for 41-43mm Bodies listed in the optional parts section.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOMPATIBILITY\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e14-19 Chevrolet C7 Corvette\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNOTE: Because of interferences with the fuel filter mounting, the plumbing kit is compatible with manual transmissions only.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":58539812356399,"sku":"20-1010","price":699.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/3903\/9279\/files\/20-1010.jpg?v=1790308654","url":"https:\/\/www.prospeedracing.com.au\/products\/radium-engineering-fuel-hanger-pumps-not-included-20-1010","provider":"Pro Speed Racing","version":"1.0","type":"link"}