{"product_id":"whiteline-front-lower-control-and-radius-arm-bmw-1-series-e8x-3-series-e9x-kta255","title":"Whiteline Front Lower Control And Radius Arm","description":"\u003ca href=\"https:\/\/www.prospeedracing.com.au\/~157400\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e\u003cp\u003eWhiteline KTA255 for the BMW 1 Series and 3 Series is a set of 4 arms to solve any front end issues you may have. Due to the high performance of many BMW models, the original rubber front control arm and radius arm bushings tend to take a beating, and have a limited service life. In addition many owners will lower their BMW with a lowering kit or coilovers and may have a front end geometry issue that needs correcting. For ease of fitment these alloy arms also come complete with adjustable synthetic elastomer bushings. These facilitate +\/- 0.5 deg camber and separately caster. These two key alignment angles can help ensure you get the car set up for minimal tyre wear with maximum grip. The bushings are designed with internal 'knurling' to ensure a reservoir for long-term lubrication with the supplied, extreme pressure molybdenum disulphide (LM) based grease for extended life. High strength ball joints are included with the arms to make this a fit and forget purchase compared to the short service life of the original and cheaper aftermarket alternatives.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cli\u003eEngineered to alter\/ optimise camber alignment to compensate for body roll, body distortion and tyre roll when cornering.\u003c\/li\u003e\u003cli\u003eEngineered to alter\/ optimise caster alignment to maximize tyre contact patch during roll, improve turn-in response \u0026amp; increase directional stability. \u003c\/li\u003e\u003cli\u003eProtective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.\u003c\/li\u003e\u003cli\u003eProtective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.\u003c\/li\u003e\u003cli\u003eInstall guide included providing detailed instructions on how to install your new Whiteline purchase .\u003c\/li\u003e\u003cli\u003eThis Whiteline kit is covered by a 3 Year \/ 60,000kms warranty including parts and labour.\u003c\/li\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKit Includes:\u003c\/strong\u003e\u003c\/p\u003e\u003cli\u003e4 Arms, 4 Bolts, 8 Nuts, Install Guide\u003c\/li\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAlignment Change:\u003c\/strong\u003e\u003c\/p\u003e\u003cli\u003eCamber\/Caster\u003c\/li\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eService Kit:\u003c\/strong\u003e\u003c\/p\u003e\u003cli\u003eN\/A\u003c\/li\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e\u003c\/p\u003e\u003cli\u003eFitment Time (Hours): 3.5\u003c\/li\u003e\u003cli\u003eDegree Of Fitment Difficulty: DIY - With Specialist Tools\u003c\/li\u003e\u003cli\u003eFitment Notes: Refer Install Guide\u003c\/li\u003e\u003cli\u003eWheel Alignment Required: Yes\u003c\/li\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVehicle Fitment and Important Notes:\u003c\/strong\u003e\u003c\/p\u003e\u003cli\u003e2004-2013 BMW 1 SERIES E81, E82, E87 AND E88 4\/6CYL (Complete Alloy control and radius arms with +\/-0.5deg camber and caster correction)\u003c\/li\u003e\u003cli\u003e2005-2011 BMW 3 SERIES E90, E91, E92 AND E93 4\/6CYL (Complete alloy control and radius arms with +\/-0.5deg camber and caster correction)\u003c\/li\u003e\u003cli\u003e2011-2012 BMW 1 SERIES E82 6CYL (Complete Alloy control and radius arms with +\/-0.5deg camber and caster correction)\u003c\/li\u003e\u003cli\u003e2007-2013 BMW 3 SERIES E90, E92 AND E93 8CYL (Complete alloy control and radius arms with +\/-0.5deg camber and caster correction)\u003c\/li\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/~157400\" style=\"text-decoration:none\"\u003e \u003c\/a\u003e","brand":"Whiteline","offers":[{"title":"Default Title","offer_id":49433297781039,"sku":"KTA255","price":1015.54,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/3903\/9279\/files\/KTA255.jpg?v=1714113045","url":"https:\/\/www.prospeedracing.com.au\/products\/whiteline-front-lower-control-and-radius-arm-bmw-1-series-e8x-3-series-e9x-kta255","provider":"Pro Speed Racing","version":"1.0","type":"link"}