🚚 Fast, Tracked Shipping • Express Available
1 4
 |  SKU: KTA296

Whiteline Front Upper Control Arm

Isuzu D-Max TF/Mazda BT-50 TF 20+
$778.86
RRP $916.31 (Save 15%)
%3Cp%3EEarn%20[points_amount]%20when%20you%20buy%20this%20item.%3C/p%3E

Description

 

A short fall of the modern day IFS 4WD is the adjustment range provided for successful wheel alignments, this becomes even more of an issue when the vehicle is lifted by more than 1 inch. Not only does the vehicle run into camber and caster issues, but ball joint articulation and clearance issues to the coil over strut at ride and droop height.

The new Whiteline offset UCA (Upper Control Arm) is an all-in-one solution for any vehicle that has been lifted between 30mm and 70mm. Providing an increase between +2.5 and +3.5 degrees of caster and up to 1.5 degrees of negative camber increase (figures quoted are based off an approximate 50mm/ 2 inch) along with greater clearance to the coil over strut and more articulation of the arm by virtue of new maintenance free GIIRO bushing technology.

 

Features:

  • The latest in material formulation technology boasts resistance to oil, grease, ozone and weathering
  • PTFE lining provides an extraordinary low coefficient of friction eliminating the need to lubricate the bushing
  • Specially bonded design for optimised strength typically required in high load bearing applications
  • Provides a window of adjustment to rectify or optimise a vehicles wheel alignment
  • Designed with the installer in mind by reducing the need of specialised skills, tools and equipment
  • Engineered to alter/ optimise camber alignment to compensate for body roll, body distortion and tyre roll when cornering
  • Engineered to alter/ optimise caster alignment to maximize tyre contact patch during roll, improve turn-in response & increase directional stability
  • Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come
  • This kit is covered by a 3 Year / 60,000kms warranty including parts and labour
  • Install guide included providing detailed instructions on how to install your new purchase

 

Important Notes:

  • Performance - fixed offset alignment correction arms

 

Kit Includes:

  • 2 Arms

 

Installation:

  • Fitment Time (Hours): 3
  • Degree Of Fitment Difficulty: DIY - With specialist tools
  • Wheel Alignment Required: Yes

 

Vehicle Fitment and Important Notes:

  • ISUZU D-MAX 4WD 2020-ON - D-MAX TF 4WD
  • MAZDA BT-50 4WD 2020-ON - BT-50 TF 4WD

  

Fitment Table