If you want the best of the best then this is it. Introducing the bad boy TS1-750 turbo kit designed and engineered to turn your little GR86/BRZ into a beast! Used on the SME GR86 promo car in EWG form, the now revised production version is now using the internal waste gate (IWG) from Turbosmart which just a work of art. Considering the sheer size of the turbo it is actually very light in weight! Also as there is no need for coolant lines with this kit, it is extremely easy to install and is visually stunning! We also run the Turbosmart OPR40 oil pressure regulator standard with this kit making sure the turbo seals stay in perfect condition from the initial start up and when racing also. And with the factory T51R whistle of this turbo every single time you lean ever so slightly on the throttle is just just pure aweomeness!!! The intercooler we use is huge also. Boasting a 100mm thick core which fits perfectly in behind the bumper with our custom laser cut and welded brackets with no cutting of the crash bar itself! Perfect if you plan on engineering your car in Australia which we always recommend

We have made over 90% power gains even with a super low 9psi of boost on pump fuel with standard injectors and fuel pump! This was on the absolute limit of the standard fuel system and we recommend upgrading the standard fuel injectors. Now we are over 240% power gains at only 12psi on E85 fuel. We have since fitted fuel injectors and fuel rails to keep up with fuel supply to the motor. We are constantly pushing the envelope and should see us going close to 400kw at the wheels which is nearly 3 times the stock power figure of our car which was 141kw at the wheels standard!

The kit comes with a 2.75” standard or 3” outlet on the dump pipe (if requested in the comments upon ordering) so you can opt for 3" turbo back exhaust system to the middle (dump pipe, over pipe and front pipe) of the car. Then our twin exit 2.75" cat back is perfect for the back half, which we can supply these products separately here on our website. You can also run our 2.75" or 3” over pipe and front pipe no problem

The SME 15 row , thermostatic oil cooler kit is a perfect upgrade when turbo charging your car to keep the oil temps in check from day to day driving and on the race track, giving you peace of mind. This can be added into this kit and will bolt straight in

Please note at checkout which size flange you require on the downpipe. This will be the size of the overpipe you are using (2.75" or 3").

Sydney Motorsport Engineering