🚚 Fast, Tracked Shipping • Express Available

 |  SKU: 9-355-1025

DeatschWerks DW340V Series 340lph In-Tank Fuel Pump w/Install Kit

VW and Audi 1.8T AWD

$449.95
%3Cp%3EEarn%20[points_amount]%20when%20you%20buy%20this%20item.%3C/p%3E

Description

Due to the current draw of the high-performance motor, this pump is not compatible with OEM fuel pump control modules. A hard-wire upgrade using 10-gauge wiring, a return-style fuel system, or a suitable high-performance aftermarket control module is required.

The DeatschWerks DW340V Series 340lph In-Tank Fuel Pump is engineered as a high-flow upgrade for late-model VW and Audi 1.8T AWD fuel pump modules. Delivering 340lph at 40psi, it provides significantly more fuel flow than the DW65v pump, supporting higher power levels and tuned engines running increased boost.

Designed to fit OEM VW/Audi fuel pump baskets, the DW340V uses a quiet, reliable turbine impeller with an encapsulated armature and carbon commutator for long-term durability and full compatibility with ethanol-based fuels. This version is specified for front-wheel drive applications and includes a vehicle-specific install kit for a clean, secure in-tank installation.

Features and Benefits

  • High-flow performance – Flows 340lph at 40psi, around 36% higher than the DW65v, ideal for higher power 1.8T builds.
  • VW/Audi specific fitment – Designed to suit OEM fuel pump modules used in popular VW and Audi AWD platforms.
  • Ethanol fuel compatible – Encapsulated armature and carbon commutator ensure durability with ethanol-based fuels.
  • Quiet turbine design – Single scroll composite turbine impeller delivers stable flow with low noise.
  • Robust construction – Anodised aluminium external materials resist corrosion in harsh fuel environments.
  • Supports high power and boost – Increased flow capacity helps maintain fuel pressure under demanding conditions.

Technical Specifications

  • Flow Rate: 340lph @ 40psi
  • Weight: 592 g (20.9 oz)
  • External Materials: Anodised aluminium
  • Inlet Fitting: 32.0 mm ID, 35.4 mm OD
  • Outlet Fitting: 5/16" hose clamp
  • Pressure Relief Valve Activation: >100 psi
  • Impeller Design: Single scroll composite turbine
  • Connector Terminal: Spade positive/negative
  • Minimum Voltage Input: 6 V
  • Maximum Voltage Input: 18 V
  • Current Draw @ 40psi: 15.8 A
  • Compatibility Notes: Not compatible with OEM fuel pump control modules; 10-gauge hardwire or suitable aftermarket control required.
  • Model/Orientation: DW340V, AWD application (SKU: 9-355-1025)

Fitment Table