This product is in stock & ready to be dispatched.
Limited Stock Available:
Stock is running low. Order soon to avoid missing out!
Almost Gone:
Stock is critically low! This product may sell out soon.
Incoming:
Product will be in stock soon.
Usually Ships In:
This product is out of stock and will usually ship in the timeframe displayed.
Sold Out:
This product is currently out of stock.
Request ETA
$169.95
Unit price /
Unavailable
Bidit helps you and Pro Speed Racing agree on a price. You set the price and Pro Speed Racing checks if they can accept your offer. You aren't competing with anyone else.
Hawk Performance LTS brake pads give you up to 40% more stopping power over stock replacement pads. Superior material, components and composite ingredients equip your vehicle with greater fade resistance, lower dust and excellent pad and rotor life. It's time you choose proven brake technology.
We understand that traditional car brake pad technology just doesn't cut it on today's trucks. This is especially true for heavily loaded trucks and vehicles used in moderate towing. Our LTS/Light Truck & SUV disc brake compound dramatically improves your vehicle's stopping power and fade resistance and outlasts the competition in terms of rotor and pad wear. Ideal for a broad range of import and domestic vehicles, LTS provides superior stopping power and longer pad life, without excessive noise and dust. Engineered by truck brake pad experts, the Ferro-Carbon friction material of LTS is the optimal pad choice for light duty trucks, all classes of SUVs, and vans up to 1 ton, and provides 20-40% more stopping power over stock replacement pads.
Features:
STREET USE ONLY
Strong & balanced initial bite, hot or cold
Greater fade resistance
Ferro-Carbon friction
Low dust output
Excellent pad & rotor life
All Hawk Performance compounds are not compatible with carbon ceramic rotors. Hawk pads are designed to work with Iron/Metal rotors.
Low torque
38C-370C operating temperatures
38C-370C optimal temperature range
Important - Installation and Brake Bedding Procedure:
STREET
Installation instructions should be followed in accordance with the application?specific brake pad installation instructions provided by the vehicle manufacturer.
Brake Pad Installation Procedure:
Install brake pads properly. Be sure pads are securely positioned in the caliper.
Check Brake Fluid. Flush and replace, as needed.
Check all hydraulic parts for excess wear and tear.
Check rotor for deep grooves or scoring. Resurface or replace rotor, as needed.
If rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130?grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.
Inspect calipers for freedom of movement. Lubricate where necessary.
Street Brake Pad Burnishing/Bedding?In Instructions:
To break in the new components, make 6 to 10 stops from approximately 30 to 35 MPH
applying moderate pressure.
Make an additional 2 to 3 hard stops from approximately 40 to 45 MPH.
DO NOT DRAG BRAKES!
Allow 15 minutes for brake system to cool down.
Your brakes are now ready for use and can be driven normally.
Step 1: Choose message placement
Click the button below and then hover over your page to select a placement.
Step 2: Paste and save
You have copied the placement for the Product Page.
Go back to the App Embeds section, and in the Paypal Advanced Settings, paste the copied value into the
Product Page field and click the 'Save' button in the top right corner.
| SKU:
HB490Y.665
