🚚 Fast, Tracked Shipping • Express Available

 |  SKU: VSHK8-K1NS4

Tein Mono Racing Damper Coilovers

Honda Civic Type-R FL5 22+

$2,980.00
%3Cp%3EEarn%20[points_amount]%20when%20you%20buy%20this%20item.%3C/p%3E

Description

The Tein Mono Racing Damper Coilovers for the Honda Civic Type-R FL5 (22+) are purpose-built for circuit and fast road use, with the adjustment range and durability to support serious track work while remaining tunable for spirited street driving. Featuring a true mono-tube design, camber and caster adjustable pillow-ball top mounts, and full-length ride height adjustment, this kit delivers precise control, sharper response and consistent performance under hard use.

Tein’s mono-tube “Upright Strong Tube” construction separates oil and gas into individual chambers to prevent aeration. This allows the damper to produce stable, linear damping force and respond accurately to small surface changes, even during repeated hot laps. Helper springs front and rear maintain rebound stroke and tyre contact, improving traction and stability under braking, cornering and acceleration.

For the Civic Type-R FL5, Mono Racing coilovers are supplied with camber and caster adjustable pillow-ball upper mounts on the front, and rear upper mounts designed to work with the OE mounting layout. The front strut-type lower brackets also include an eccentric washer system for additional camber adjustment, giving a wide alignment window to suit street, track or time-attack setups.

Full-length ride height adjustment allows you to lower the car without sacrificing usable stroke. Spring preload and ride height can be set largely independently, helping you target both handling balance and aesthetics without severely compromising ride quality. The standard US/UK-spec spring rates of 14 kgf/mm front and 12 kgf/mm rear are tuned to control the FL5’s weight and high-speed capability, reducing body roll and nose dive under braking while maintaining predictable balance near the limit.

The 16-way damping adjustment (simultaneous compression and rebound) is accessed from the top of the dampers, with the rear designed to work especially well with Tein’s optional EDFC Series for in-cabin electronic adjustment. Using ADVANCE M.S.V. valving and an ADVANCE Needle, the Mono Racing offers a wide and usable adjustment range, from a firmer, track-focused feel through to a more compliant setting for street use.

Durability is addressed through Tein’s high-spec damper oil, no-sag SAE9254 steel springs, and a robust anti-corrosion package. The signature TEIN-green, dual-layer powder coating and ZTP surface treatment provide exceptional rust resistance, proven in harsh environments including coastal regions and areas with heavy road salt use. An error canceller kit is included for the FL5 to prevent suspension-related warning lights.

Whether you are chasing lap times or want a highly tuneable, motorsport-derived suspension for your Civic Type-R FL5, the Tein Mono Racing Damper Coilovers (SKU: VSHK8-K1NS4) provide the adjustability, control and reliability expected from a dedicated sports-use coilover.

Features and Benefits

  • Motorsport-focused mono-tube design – Separate oil and gas chambers prevent aeration, delivering consistent damping and precise response under repeated hard use.
  • Upright Strong Tube construction – High lateral rigidity in the front struts improves steering accuracy and feedback, developed from Tein’s WRC and WRX involvement.
  • Camber and caster adjustable pillow-ball front mounts – Stepless camber and 4-step caster adjustment at the top mounts allow aggressive alignment setups to suit circuit, time attack or fast road use.
  • Camber-adjustable lower brackets – Eccentric washer system on the front struts adds further camber range, enabling fine-tuning even where only limited factory adjustment is available.
  • Full-length ride height adjustment – Change ride height with minimal impact on stroke and ride quality, combining a low stance with effective bump and rebound travel.
  • 16-level damping force adjustment – Simultaneously tunes compression and rebound to tailor body control, turn-in feel and overall ride firmness to your driving style.
  • ADVANCE M.S.V. valving – Micro-speed valve control and ADVANCE Needle technology provide a broad, effective adjustment range, enhancing traction and steering response.
  • Helper springs front and rear – Maintain sufficient rebound stroke for better ground contact, stability over kerbs and improved traction on uneven surfaces.
  • EDFC compatible – Designed to work with Tein’s EDFC Series for in-cabin, electronic damping control and advanced, speed- and G-sensitive adjustment (optional).
  • High-durability construction – No-sag SAE9254 steel springs, high-performance damper oil, and robust dust boots protect against wear, cavitation and contamination.
  • Superior rust protection – TEIN-green dual-layer powder coating and ZTP surface treatment offer outstanding resistance to chipping and corrosion.
  • Error canceller included – Prevents suspension warning lights on the Civic Type-R FL5 when installing the coilover kit.

Technical Specifications

  • Product: Tein Mono Racing Damper Coilovers
  • SKU: VSHK8-K1NS4
  • Vehicle application: Honda Civic Type-R FL5 (2022+)
  • Damper type: Mono-tube, gas/oil separated
  • Adjustment: 16-level damping force (compression and rebound together)
  • Ride height adjustment: Full-length threaded body
  • Front upper mount: Pillow-ball, camber and caster adjustable
  • Rear upper mount: Rubber-type (R/U), model-specific
  • Front ride height change (standard setting): approx. -20 mm
  • Rear ride height change (standard setting): approx. -30 mm
  • Front ride height range: -53 to -10 mm (recommended -35 to -15 mm)
  • Rear ride height range: -63 to -9 mm (recommended -40 to -20 mm)
  • Front spring rate (standard US/UK spec): 14.0 kgf/mm (approx. 784 lbs/in), 115 mm length, φ70 mm I.D.
  • Rear spring rate (standard US/UK spec): 12.0 kgf/mm (approx. 672 lbs/in), 135 mm length, φ70 mm I.D.
  • Selectable front spring rates (at purchase): 12, 14, 16 kgf/mm
  • Selectable rear spring rates (at purchase): 10, 12, 14 kgf/mm
  • Spring material: SAE9254 steel, cold-formed, no-sag design
  • Coating: TEIN-green dual-layer powder coating with ZTP surface treatment
  • Compatibility: EDFC Series (rear adjustment strongly recommended via EDFC due to access limitations)
  • Electronics: Error canceller kit included for FL5

Included Components

  • 4 x Tein Mono Racing dampers (front and rear, vehicle-specific)
  • 4 x main springs (front and rear, US/UK spec: 14 kgf/mm front, 12 kgf/mm rear)
  • 4 x helper springs (front and rear)
  • Front pillow-ball camber/caster adjustable upper mounts
  • Rear upper mounts (R/U type, model-specific)
  • Eccentric camber adjustment washers for front lower brackets
  • Error canceller kit for Honda Civic Type-R FL5
  • Height adjustment spanners
  • Mounting hardware and accessories specific to the FL5
  • Installation manual and setup instructions

Fitment Table