🚚 Flat Rate Shipping

 |  SKU: W53347

Whiteline Front Control Arm Lower Bushing

Holden Commodore VE-VF/HSV VE-VF

$146.74
RRP $172.63 (Save 15%)
%3Cp%3EEarn%20[points_amount]%20when%20you%20buy%20this%20item.%3C/p%3E

Description

 

Whiteline Fixed Camber kits provide additional camber angle resulting in increased grip during cornering and traction under power. The kit includes low compliance synthetic elastomer bushings which maintain preferred alignment settings as well as enhanced steering response.

 

Features:

  • Engineered to alter/ optimise camber alignment to compensate for body roll, body distortion and tyre roll when cornering.
  • Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
  • Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
  • Whiteline's latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
  • Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
  • Internal grease reservoirs provide continual self-lubrication for optimum friction management.
  • Install guide included providing detailed instructions on how to install your new Whiteline purchase .
  • This Whiteline kit is covered by a limited lifetime warranty including parts and labour.
  •  

    Kit Includes:

  • 4 Bushings, 2 Tubes, Install Guide, Grease
  •  

    Alignment Change:

  • Camber
  •  

    Service Kit:

  • N/A
  •  

    Installation:

  • Fitment Time (Hours): 2.5
  • Degree Of Fitment Difficulty: Trade Specialist
  • Fitment Notes: Refer Install Guide
  • Wheel Alignment Required: Yes
  •  

    Vehicle Fitment and Important Notes:

  • 2006-2013 HOLDEN CAPRICE WM 6/8CYL (Adds +/- 0.5deg camber - high performance use)
  • 2013-2018 HOLDEN CAPRICE WN 6/8CYL (Adds +/- 0.5deg camber - high performance use)
  • 2006-2013 HOLDEN COMMODORE VE 6/8CYL (Adds +/- 0.5deg camber - high performance use)
  • 2013-2017 HOLDEN COMMODORE VF 6/8CYL (Adds +/- 0.5deg camber - high performance use)
  • 2006-2013 HOLDEN STATESMAN WM 6/8CYL (Adds +/- 0.5deg camber - high performance use)
  • 2006-2013 HSV CLUBSPORT E SERIES 8CYL (Adds +/- 0.5deg camber - high performance use)
  • 2013-2017 HSV CLUBSPORT GEN F 8CYL (Adds +/- 0.5deg camber - high performance use)
  • 2006-2013 HSV GRANGE WM 8CYL (Adds +/- 0.5deg camber - high performance use)
  • 2013-2016 HSV GRANGE GEN F 8CYL (Adds +/- 0.5deg camber - high performance use)
  • 2006-2013 HSV GTS E SERIES 8CYL (Adds +/- 0.5deg camber - high performance use)
  • 2013-2017 HSV GTS GEN F 8CYL (Adds +/- 0.5deg camber - high performance use)
  • 2007-2013 HSV MALOO E SERIES 8CYL (Adds +/- 0.5deg camber - high performance use)
  • 2013-2017 HSV MALOO GEN F 8CYL (Adds +/- 0.5deg camber - high performance use)
  • 2006-2013 HSV SENATOR E SERIES 8CYL (Adds +/- 0.5deg camber - high performance use)
  • 2013-2017 HSV SENATOR GEN F 8CYL (Adds +/- 0.5deg camber - high performance use)
  • 2008-2009 HSV W427 E SERIES 8CYL (Adds +/- 0.5deg camber - high performance use)
  •  

    Technical Specifications

    Kit Specifications:

    KIT QTYBUSH QTYOD (A)ID (B)LENGTH (C) FLANGE THICKNESS (D)FLANGE ODC/TUBE QTYC/TUBE OD x ID x LENGTHCOMMENTS
    4446.331.5251054.2231.8x12.3x50Eccentric Crush Tube

    Fitment Table