🚚 Flat Rate Shipping

 |  SKU: KCA383

Whiteline Rear Camber/Toe Correction

Holden Astra TS, AH/Barina SB, XC, TK/Combo

$182.26
RRP $227.82 (Save 20%)
%3Cp%3EEarn%20[points_amount]%20when%20you%20buy%20this%20item.%3C/p%3E

Description

 

KCA383 is a pre-set dual-angle full contact shim type rear Camber and Toe adjustment kit. It is designed to provide +0.5 deg of camber reduction and 2.5mm of toe-in change per side from base settings. Please note final outcome may vary slightly due to rear axle flex.

 

Features:

  • Engineered to alter/ optimise camber alignment to compensate for body roll, body distortion and tyre roll when cornering.
  • Engineered to alter/ optimise toe alignment to rectify tyre wear and/or reduce inherent understeer/oversteer behaviour.
  • Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
  • Install guide included providing detailed instructions on how to install your new Whiteline purchase .
  • This Whiteline kit is covered by a 3 Year / 60,000kms warranty including parts and labour.
  •  

    Kit Includes:

  • 2 Shims, Install Guide
  •  

    Alignment Change:

  • Camber/Toe
  •  

    Service Kit:

  • N/A
  •  

    Installation:

  • Fitment Time (Hours): 2
  • Degree Of Fitment Difficulty: DIY - Do It Yourself
  • Fitment Notes: Refer Install Guide
  • Wheel Alignment Required: No
  •  

    Vehicle Fitment and Important Notes:

  • 2003-2004 DAEWOO KALOS T200 4CYL (Shim type - adds +0.5deg camber and reduce toe-in 2.5mm/side)
  • 1998-2004 HOLDEN ASTRA TS MK4 INCL SRI 4CYL (Shim type - adds +0.5deg camber and reduce toe-in 2.5mm/side)
  • 2004-2009 HOLDEN ASTRA AH MK5 INCL SRI 4CYL (Shim type - adds +0.5deg camber and reduce toe-in 2.5mm/side)
  • 1994-2002 HOLDEN BARINA SB INCL GSI 4CYL (Shim type - adds +0.5deg camber and reduce toe-in 2.5mm/side)
  • 2001-2005 HOLDEN BARINA XC 4CYL (Shim type - adds +0.5deg camber and reduce toe-in 2.5mm/side)
  • 2005-2011 HOLDEN BARINA TK 4CYL (Shim type - adds +0.5deg camber and reduce toe-in 2.5mm/side)
  • 1994-2002 HOLDEN COMBO SB 4CYL (Shim type - adds +0.5deg camber and reduce toe-in 2.5mm/side)
  • 2002-2013 HOLDEN COMBO XC 4CYL (Shim type - adds +0.5deg camber and reduce toe-in 2.5mm/side)
  • 2005-2007 HOLDEN TIGRA XC 4CYL (Shim type - adds +0.5deg camber and reduce toe-in 2.5mm/side)
  • 2001-2003 HOLDEN ZAFIRA TT 4CYL (Shim type - adds +0.5deg camber and reduce toe-in 2.5mm/side)
  • 2006-2009 HSV VXR AH 4CYL (Shim type - adds +0.5deg camber and reduce toe-in 2.5mm/side)
  •  

    Technical Specifications

    Kit Specifications:

    KIT QTYBUSH QTYOD (A)ID (B)LENGTH (C) FLANGE THICKNESS (D)FLANGE ODC/TUBE QTYC/TUBE OD x ID x LENGTHCOMMENTS

    Fitment Table