Whiteline Rear Control Arm Inner And Outer Bushing
Holden Commodore VN-VZ/Monaro/HSV VN-VZ
In Stock:
This product is in stock & ready to be dispatched.
Limited Stock Available:
Stock is running low. Order soon to avoid missing out!
Almost Gone:
Stock is critically low! This product may sell out soon.
Incoming:
Product will be in stock soon.
Usually Ships In:
This product is out of stock and will usually ship in the timeframe displayed.
Sold Out:
This product is currently out of stock.
Request ETA
$151.47
RRP $189.34(Save 20%)
Unit price /
Unavailable
Bidit helps you and Pro Speed Racing agree on a price. You set the price and Pro Speed Racing checks if they can accept your offer. You aren't competing with anyone else.
IRS Commodores suffer from uneven rear tyre wear especially when lowered or when towing. The Whiteline 2 point camber / toe correction kits improve rear wheel alignment settings and saves you on replacing costly tyres.
Features:
Engineered to alter/ optimise camber alignment to compensate for body roll, body distortion and tyre roll when cornering.
Engineered to alter/ optimise toe alignment to rectify tyre wear and/or reduce inherent understeer/oversteer behaviour.
Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
Whiteline's latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
Internal grease reservoirs provide continual self-lubrication for optimum friction management.
Install guide included providing detailed instructions on how to install your new Whiteline purchase .
This Whiteline kit is covered by a limited lifetime warranty including parts and labour.
Kit Includes:
4 Bushings, 2 Tubes, Install Guide, Grease
Alignment Change:
Camber
Service Kit:
N/A
Installation:
Fitment Time (Hours): 2.5
Degree Of Fitment Difficulty: Trade Specialist
Fitment Notes: Refer Install Guide
Wheel Alignment Required: Yes
Vehicle Fitment and Important Notes:
2002-2006 HOLDEN ADVENTRA VY, VZ 6/8CYL (2 bolt design - standard height vehicles - offers 6-8mm toe and +/- 0.5deg camber adjustment)
1991-1998 HOLDEN CALIBRA YE 4/6CYL (2 bolt design - standard height vehicles - offers 6-8mm toe and +/- 0.5deg camber adjustment)
1991-1998 HOLDEN CALIBRA YE 4/6CYL (2 bolt design - lowered vehicles - offers 14-16mm toe and +/- 2deg camber adjustment)
1990-1994 HOLDEN CAPRICE VQ 8CYL (2 bolt design - standard height vehicles - offers 6-8mm toe and +/- 0.5deg camber adjustment)
1990-1994 HOLDEN CAPRICE VQ 8CYL (2 bolt design - lowered vehicles - offers 14-16mm toe and +/- 2deg camber adjustment)
1994-1999 HOLDEN CAPRICE VR, VS 6/8CYL (2 bolt design - standard height vehicles - offers 6-8mm toe and +/- 0.5deg camber adjustment)
1994-1999 HOLDEN CAPRICE VR, VS 6/8CYL (2 bolt design - lowered vehicles - offers 14-16mm toe and +/- 2deg camber adjustment)
1999-2003 HOLDEN CAPRICE WH 6/8CYL (2 bolt design - standard height vehicles - offers 6-8mm toe and +/- 0.5deg camber adjustment)
1999-2003 HOLDEN CAPRICE WH 6/8CYL (2 bolt design - lowered vehicles - offers 14-16mm toe and +/- 2deg camber adjustment)
2003-2004 HOLDEN CAPRICE WK 6/8CYL (2 bolt design - standard height vehicles - offers 6-8mm toe and +/- 0.5deg camber adjustment - fit to outer point only)
2004-2006 HOLDEN CAPRICE WL 6/8CYL (2 bolt design - standard height vehicles - offers 6-8mm toe and +/- 0.5deg camber adjustment - fit to outer point only)
1988-1993 HOLDEN COMMODORE VN, VP, VG 6/8CYL (2 bolt design - standard height vehicles - offers 6-8mm toe and +/- 0.5deg camber adjustment)
1993-1997 HOLDEN COMMODORE VR, VS 6/8CYL (2 bolt design - standard height vehicles - offers 6-8mm toe and +/- 0.5deg camber adjustment)
1993-1997 HOLDEN COMMODORE VR, VS 6/8CYL (2 bolt design - lowered vehicles - offers 14-16mm toe and +/- 2deg camber adjustment)
1997-2002 HOLDEN COMMODORE VT, VX, VU 6/8CYL (2 bolt design - standard height vehicles - offers 6-8mm toe and +/- 0.5deg camber adjustment)
1997-2002 HOLDEN COMMODORE VT, VX, VU 6/8CYL (2 bolt design - lowered vehicles - offers 14-16mm toe and +/- 2deg camber adjustment)
2002-2006 HOLDEN COMMODORE VY, VZ 6/8CYL (2 bolt design - standard height vehicles - offers 6-8mm toe and +/- 0.5deg camber adjustment - fit to outer point only)
2001-2004 HOLDEN MONARO V2 6/8CYL (2 bolt design - standard height vehicles - offers 6-8mm toe and +/- 0.5deg camber adjustment - fit to outer point only)
2004-2006 HOLDEN MONARO VZ 8CYL (2 bolt design - standard height vehicles - offers 6-8mm toe and +/- 0.5deg camber adjustment - fit to outer point only)
1990-1994 HOLDEN STATESMAN VQ 6/8CYL (2 bolt design - standard height vehicles - offers 6-8mm toe and +/- 0.5deg camber adjustment)
1990-1994 HOLDEN STATESMAN VQ 6/8CYL (2 bolt design - lowered vehicles - offers 14-16mm toe and +/- 2deg camber adjustment)
1994-1999 HOLDEN STATESMAN VR, VS 6/8CYL (2 bolt design - standard height vehicles - offers 6-8mm toe and +/- 0.5deg camber adjustment)
1994-1999 HOLDEN STATESMAN VR, VS 6/8CYL (2 bolt design - lowered vehicles - offers 14-16mm toe and +/- 2deg camber adjustment)
1999-2003 HOLDEN STATESMAN WH 6/8CYL (2 bolt design - standard height vehicles - offers 6-8mm toe and +/- 0.5deg camber adjustment)
1999-2003 HOLDEN STATESMAN WH 6/8CYL (2 bolt design - lowered vehicles - offers 14-16mm toe and +/- 2deg camber adjustment)
2003-2004 HOLDEN STATESMAN WK 6/8CYL (2 bolt design - standard height vehicles - offers 6-8mm toe and +/- 0.5deg camber adjustment - fit to outer point only)
2004-2006 HOLDEN STATESMAN WL 6/8CYL (2 bolt design - standard height vehicles - offers 6-8mm toe and +/- 0.5deg camber adjustment - fit to outer point only)
2003-2006 HSV AVALANCHE Y SERIES, Z SERIES 8CYL (2 bolt design - standard height vehicles - offers 6-8mm toe and +/- 0.5deg camber adjustment)
1994-1999 HSV CAPRICE VR, VS 8CYL (2 bolt design - standard height vehicles - offers 6-8mm toe and +/- 0.5deg camber adjustment)
1994-1999 HSV CAPRICE VR, VS 8CYL (2 bolt design - lowered vehicles - offers 14-16mm toe and +/- 2deg camber adjustment)
1993-1994 HSV CLUBSPORT SV VP 8CYL (2 bolt design - standard height vehicles - offers 6-8mm toe and +/- 0.5deg camber adjustment)
2002-2006 HSV CLUBSPORT Y SERIES, Z SERIES 8CYL (2 bolt design - standard height vehicles - offers 6-8mm toe and +/- 0.5deg camber adjustment - fit to outer point only)
2004-2006 HSV COUPE V2, Z SERIES 8CYL (2 bolt design - standard height vehicles - offers 6-8mm toe and +/- 0.5deg camber adjustment)
2001-2004 HSV COUPE V2 8CYL (2 bolt design - standard height vehicles - offers 6-8mm toe and +/- 0.5deg camber adjustment - fit to outer point only)
2004-2007 HSV COUPE Z SERIES 8CYL (2 bolt design - standard height vehicles - offers 6-8mm toe and +/- 0.5deg camber adjustment - fit to outer point only)
1996-1998 HSV GRANGE VS 8CYL (2 bolt design - standard height vehicles - offers 6-8mm toe and +/- 0.5deg camber adjustment)
1996-1998 HSV GRANGE VS 8CYL (2 bolt design - lowered vehicles - offers 14-16mm toe and +/- 2deg camber adjustment)
1999-2003 HSV GRANGE WH 6/8CYL (2 bolt design - standard height vehicles - offers 6-8mm toe and +/- 0.5deg camber adjustment)
1999-2003 HSV GRANGE WH 6/8CYL (2 bolt design - lowered vehicles - offers 14-16mm toe and +/- 2deg camber adjustment)
2003-2004 HSV GRANGE WK 8CYL (2 bolt design - standard height vehicles - offers 6-8mm toe and +/- 0.5deg camber adjustment - fit to outer point only)
2004-2006 HSV GRANGE WL 8CYL (2 bolt design - standard height vehicles - offers 6-8mm toe and +/- 0.5deg camber adjustment - fit to outer point only)
1992-1992 HSV GTS VP 8CYL (2 bolt design - standard height vehicles - offers 6-8mm toe and +/- 0.5deg camber adjustment)
1992-1992 HSV GTS VP 8CYL (2 bolt design - lowered vehicles - offers 14-16mm toe and +/- 2deg camber adjustment)
1994-1997 HSV GTS VR, VS 8CYL (2 bolt design - standard height vehicles - offers 6-8mm toe and +/- 0.5deg camber adjustment)
1994-1997 HSV GTS VR, VS 8CYL (2 bolt design - lowered vehicles - offers 14-16mm toe and +/- 2deg camber adjustment)
1997-2000 HSV GTS VT 8CYL (2 bolt design - standard height vehicles - offers 6-8mm toe and +/- 0.5deg camber adjustment)
1997-2000 HSV GTS VT 8CYL (2 bolt design - lowered vehicles - offers 14-16mm toe and +/- 2deg camber adjustment)
2000-2001 HSV GTS VX 8CYL (2 bolt design - standard height vehicles - offers 6-8mm toe and +/- 0.5deg camber adjustment)
2000-2001 HSV GTS VX 8CYL (2 bolt design - lowered vehicles - offers 14-16mm toe and +/- 2deg camber adjustment)
2002-2004 HSV GTS Y SERIES 8CYL (2 bolt design - standard height vehicles - offers 6-8mm toe and +/- 0.5deg camber adjustment - fit to outer point only)
2001-2002 HSV MALOO VU 8CYL (2 bolt design - standard height vehicles - offers 6-8mm toe and +/- 0.5deg camber adjustment)
2001-2002 HSV MALOO VU 8CYL (2 bolt design - lowered vehicles - offers 14-16mm toe and +/- 2deg camber adjustment)
2002-2007 HSV MALOO Y SERIES, Z SERIES 8CYL (2 bolt design - standard height vehicles - offers 6-8mm toe and +/- 0.5deg camber adjustment - fit to outer point only)
1995-1997 HSV MANTA VS 8CYL (2 bolt design - standard height vehicles - offers 6-8mm toe and +/- 0.5deg camber adjustment)
1995-1997 HSV MANTA VS 8CYL (2 bolt design - lowered vehicles - offers 14-16mm toe and +/- 2deg camber adjustment)
1997-1999 HSV MANTA VT 8CYL (2 bolt design - standard height vehicles - offers 6-8mm toe and +/- 0.5deg camber adjustment)
1997-1999 HSV MANTA VT 8CYL (2 bolt design - lowered vehicles - offers 14-16mm toe and +/- 2deg camber adjustment)
1992-1993 HSV SENATOR VP 8CYL (2 bolt design - standard height vehicles - offers 6-8mm toe and +/- 0.5deg camber adjustment)
1992-1993 HSV SENATOR VP 8CYL (2 bolt design - lowered vehicles - offers 14-16mm toe and +/- 2deg camber adjustment)
1993-1997 HSV SENATOR VR, VS 8CYL (2 bolt design - standard height vehicles - offers 6-8mm toe and +/- 0.5deg camber adjustment)
1993-1997 HSV SENATOR VR, VS 8CYL (2 bolt design - lowered vehicles - offers 14-16mm toe and +/- 2deg camber adjustment)
1997-2002 HSV SENATOR VT, VX 8CYL (2 bolt design - standard height vehicles - offers 6-8mm toe and +/- 0.5deg camber adjustment)
1997-2002 HSV SENATOR VT, VX 8CYL (2 bolt design - lowered vehicles - offers 14-16mm toe and +/- 2deg camber adjustment)
2002-2006 HSV SENATOR Y SERIES, Z SERIES 8CYL (2 bolt design - standard height vehicles - offers 6-8mm toe and +/- 0.5deg camber adjustment - fit to outer point only)
1990-1994 HSV STATESMAN VP, VQ, SV90, SV91, SV93 8CYL (2 bolt design - standard height vehicles - offers 6-8mm toe and +/- 0.5deg camber adjustment)
1994-1999 HSV STATESMAN VR, VS 8CYL (2 bolt design - standard height vehicles - offers 6-8mm toe and +/- 0.5deg camber adjustment)
1994-1999 HSV STATESMAN VR, VS 8CYL (2 bolt design - lowered vehicles - offers 14-16mm toe and +/- 2deg camber adjustment)
1999-2000 HSV SV99 VT 8CYL (2 bolt design - standard height vehicles - offers 6-8mm toe and +/- 0.5deg camber adjustment)
1999-2000 HSV SV99 VT 8CYL (2 bolt design - lowered vehicles - offers 14-16mm toe and +/- 2deg camber adjustment)
2001-2001 HSV SV300 VX 8CYL (2 bolt design - standard height vehicles - offers 6-8mm toe and +/- 0.5deg camber adjustment)
2001-2001 HSV SV300 VX 8CYL (2 bolt design - lowered vehicles - offers 14-16mm toe and +/- 2deg camber adjustment)
2005-2006 HSV SV6000 Z SERIES 8CYL (2 bolt design - standard height vehicles - offers 6-8mm toe and +/- 0.5deg camber adjustment - fit to outer point only)
1998-2002 HSV XU6 VT, VX 6CYL (2 bolt design - standard height vehicles - offers 6-8mm toe and +/- 0.5deg camber adjustment)
Step 1: Choose message placement
Click the button below and then hover over your page to select a placement.
Step 2: Paste and save
You have copied the placement for the Product Page.
Go back to the App Embeds section, and in the Paypal Advanced Settings, paste the copied value into the
Product Page field and click the 'Save' button in the top right corner.
| SKU:
W63404
