🚚 Fast, Tracked Shipping • Express Available
 |  SKU: 1750.48.11.14.2

Injector Dynamics ID1750-XDS 48mm Injectors Set of 2 w/11mm Red Adaptor Top, 14mm Bottom O-Ring - Universal

Universal
$999.95
%3Cp%3EEarn%20[points_amount]%20when%20you%20buy%20this%20item.%3C/p%3E

Description

Two-injector engines, or anyone who needs exactly two in this configuration, are covered by this universal pair of Injector Dynamics ID1750-XDS injectors, each 48mm long with a red 11mm adaptor top and a 14mm bottom O-ring.

Pro Speed Racing doesn't make these; Injector Dynamics does. Pro Speed Racing is the official Main Wholesale Distributor for Injector Dynamics in Australia and New Zealand, with the complete Injector Dynamics range available to order.

In the box: 1750.48.11.14.2

  • Part number 1750.48.11.14.2
  • 2 x ID1750-XDS
  • 48mm length
  • Red 11mm adaptor top
  • 14mm bottom O-ring

Flow, pressure and connector specs for the pair are in Technical Specifications below.

More flow, same minimum

More at the top, nothing lost at idle. The headline change from the ID1700 to the ID1750-XDS, according to Injector Dynamics, is a higher dynamic flow rate with no increase in minimum fuel mass, so the injector gains capacity without giving up the small fuel deliveries your engine needs at idle. Injector Dynamics also improved pressure sensitivity and low-pulsewidth balance, and kept the corrosion resistance that lets it run on practically any fuel.

Sizing and spares

Match the length and O-rings to your current injectors and check the Vehicle Fitment tab before ordering. To carry a spare, add the single ID1750-XDS with the same 48mm red-top configuration.

Technical Specifications

  • Nominal Flow Rate: 1728cc/min @ 3.0 Bar (43.5 psi), Using E10 Emissions Certification Fuel at 49 Degrees C (120F)
  • Maximum Differential Fuel Pressure: 7.0 Bar (101.5 psi)
  • Electrical Connector: USCAR
  • Fuel Compatibility 
    • Methanol
    • Ethanol
    • MTBE
    • Nitromethane
    • All Known Hydrocarbon Fuels.

Fitment Table