🚚 Fast, Tracked Shipping • Express Available
 |  SKU: 1750.60.11.D

Injector Dynamics ID1750-XDS 60mm Single Injector w/11mm Blue Adaptor Top, Denso Lower Cushion - Universal

Universal
$514.95
%3Cp%3EEarn%20[points_amount]%20when%20you%20buy%20this%20item.%3C/p%3E

Description

Bought one injector at a time, this universal 60mm Injector Dynamics ID1750-XDS single with an 11mm blue adaptor top and a Denso-style lower cushion works as a replacement or an upgrade. It suits engines set up for a cushion-lower injector that now need ID1750-XDS flow.

As official Main Wholesale Distributor for Injector Dynamics in Australia and New Zealand, Pro Speed Racing supplies genuine injectors made by Injector Dynamics. The Injector Dynamics collection page shows every set and single.

Part 1750.60.11.D

  • Part no. 1750.60.11.D
  • 1 injector
  • 60mm length
  • 11mm top, blue adaptor
  • Denso-style lower cushion

Nominal flow, pressure and connector are all in the Technical Specifications section below.

Dynamic flow without the trade-off

More flow, same small-shot control. Injector Dynamics says the ID1750-XDS raises dynamic flow over the ID1700 with no increase in minimum fuel mass. It also improves balance between cylinders at low pulsewidths and reduces pressure sensitivity, while keeping the corrosion-resistant internals the ID1700 was known for.

Fit check

Measure the injectors in your engine and compare the 60mm length, 11mm top and cushion lower before ordering, and check the Vehicle Fitment tab. Need a lower-flow 60mm injector with the same blue 11mm top? Try the ID1050-XDS 60mm with retained 14mm lower.

Technical Specifications

  • Nominal Flow Rate: 1728cc/min @ 3.0 Bar (43.5 psi), Using E10 Emissions Certification Fuel at 49 Degrees C (120F)
  • Maximum Differential Fuel Pressure: 7.0 Bar (101.5 psi)
  • Electrical Connector: USCAR
  • Fuel Compatibility 
    • Methanol
    • Ethanol
    • MTBE
    • Nitromethane
    • All Known Hydrocarbon Fuels.

Fitment Table